What does BT30-ER32 mean on a tool holder?

Q: What does BT30-ER32 mean on a tool holder?

Short answer: `BT30-ER32` is a BT30 machine-taper holder fitted with an ER32 collet chuck; it holds tools from 1 mm to 20 mm shank diameter. The BT30 end goes into the spindle (7:24 taper, JIS B 6339, pull stud M12), the ER32 end grips the tool. Collet range is set by DIN 6499. A 12 mm end mill needs ER32 or larger; an ER32 will not close on a shank outside 1–20 mm.<

Question

Accepted Answer

Short answer: `BT30-ER32` is a BT30 machine-taper holder fitted with an ER32 collet chuck; it holds tools from 1 mm to 20 mm shank diameter. The BT30 end goes into the spindle (7:24 taper, JIS B 6339, pull stud M12), the ER32 end grips the tool.

Collet range is set by DIN 6499. A 12 mm end mill needs ER32 or larger; an ER32 will not close on a shank outside 1–20 mm.<