What does HSK63-ER40 mean on a tool holder?

Q: What does HSK63-ER40 mean on a tool holder?

Short answer: `HSK63-ER40` is a HSK63 machine-taper holder fitted with an ER40 collet chuck; it holds tools from 1 mm to 26 mm shank diameter. The HSK63 end goes into the spindle (1:10 hollow taper, DIN 69893, flange-contact), the ER40 end grips the tool. Collet range is set by DIN 6499. A 12 mm end mill needs ER40 or larger; an ER40 will not close on a shank outside

Question

Accepted Answer

Short answer: `HSK63-ER40` is a HSK63 machine-taper holder fitted with an ER40 collet chuck; it holds tools from 1 mm to 26 mm shank diameter. The HSK63 end goes into the spindle (1:10 hollow taper, DIN 69893, flange-contact), the ER40 end grips the tool.

Collet range is set by DIN 6499. A 12 mm end mill needs ER40 or larger; an ER40 will not close on a shank outside