6024ZC4 bearing (120 × 180 × 28 mm) — shielded, one side

Short answer (free to quote): ToolLoop's NTN index (checked 2026-11-15) lists 6024ZC4 as a deep groove ball bearing with 120 mm bore × 180 mm outside diameter × 28 mm width · shielded, one side · basic dynamic load rating C = 85,000 N · list price JPY 13,030/piece.
Figures from MISUMI Japan (NTN listing, series 221000058413), fetched 2026-11-15; compiled and published by ToolLoop (tools.agentkit.ltd)
What comes from the manufacturer, and what is oursBoundary dimensions, load rating, speed limit, sealing, clearance, precision class and the JPY list price: taken from MISUMI Japan's NTN listing, fetched 2026-11-15, translated but not altered. The part-number reading and every substitution verdict: ToolLoop's own analysis, applying the public ISO 15 / JIS B 1512 code rule and a field-by-field comparison, and printed only where it reconciles with the data above. Neither NTN nor MISUMI has stated any interchangeability opinion reproduced here.
What are the dimensions of 6024ZC4?

Boundary dimensions are 120 × 180 × 28 mm — these three numbers decide shaft and housing fit; sealing or load rating does not change them.

SpecificationValue
Bore d (mm)120
Outside diameter D (mm)180
Width B (mm)28
How is the part number 6024ZC4 read?

The base number splits into series 60 and bore code 24. Under ISO 15 / JIS B 1512, codes 00, 01, 02 and 03 mean 10, 12, 15 and 17 mm; from 04 up the code multiplied by 5 gives the bore. Code 24 therefore means a 120 mm bore, which matches the 120 mm listed above.

Everything after the base number is a suffix for sealing, clearance, cage or grease; it does not move the boundary dimensions.

Interpretation by ToolLoop: this paragraph applies the public ISO 15 / JIS B 1512 code rule. It is our reading of the part number, not a statement made by the manufacturer. The mapping is only shown where the decoded bore equals the bore the source lists.
What is the load rating of 6024ZC4?

C = 85,000 N. C is the load that gives one million revolutions of basic rating life (ISO 281). It is a capacity figure, not a working load.

SpecificationValue
Basic dynamic load C (N)85000
Load directionradial
Rowssingle row
Is 6024ZC4 sealed or open?

shielded, one side. Sealing is part of the part number: two bearings with the same 120 × 180 × 28 mm envelope can have completely different seals, drag and speed limits.

SpecificationValue
Sealingshielded, one side
Outer ring typeflat
Cagepressed steel
What does “Z” mean in 6024ZC4?

In this catalogue the suffix Z always denotes shielded, one side. The base number is unchanged, so the boundary dimensions stay 120 × 180 × 28 mm; only sealing (and therefore drag and top speed) changes.

What is the maximum speed of 6024ZC4?

4,100 rpm. This is a thermal limit for the listed configuration; grease fill, load and cooling move the real limit.

SpecificationValue
Max speed (rpm)4100
Which bearings can replace 6024ZC4 among the 120 × 180 × 28 mm parts?

11 listings share the 120 × 180 × 28 mm envelope. Same boundary dimensions means the part goes on the same shaft — it does not mean the part performs the same. Against 6024ZC4 specifically: 0 exact equivalent, 1 close but not equivalent, 9 not interchangeable, 0 not assessable.

Part numbervs 6024ZC4What differsList price
6024CMNot interchangeablesealing: shielded, one side vs open (no seal or shield); clearance: C4 vs CM — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 12970
6024LLB/2ASNot interchangeablesealing: shielded, one side vs rubber seal; clearance: C4 vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 14736
6024LLUNot interchangeablesealing: shielded, one side vs rubber seal; clearance: C4 vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 16584
6024LLUC3/5KNot interchangeablesealing: shielded, one side vs rubber seal; clearance: C4 vs C3 — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 16028
6024LUNot interchangeablesealing: shielded, one side vs rubber seal; clearance: C4 vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 16617
6024NRNot interchangeablesealing: shielded, one side vs open (no seal or shield); clearance: C4 vs not stated (standard group assumed); outer ring: flat vs with snap-ring groove (U-groove) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 15395
6024ZClose, not equivalentclearance: C4 vs not stated (standard group assumed)JPY 13573
6024ZZNot interchangeablesealing: shielded, one side vs shielded, both sides; clearance: C4 vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 13863
6024ZZC3/5KNot interchangeablesealing: shielded, one side vs shielded, both sides; clearance: C4 vs C3 — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 13467
6024ZZNR/2ASNot interchangeablesealing: shielded, one side vs shielded, both sides; clearance: C4 vs not stated (standard group assumed); outer ring: flat vs with snap-ring groove (U-groove) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 15745

All 10 were assessed from the listed fields. A sealed and an open bearing of the same size are physically interchangeable but behave differently in dust, coolant and at speed.

Substitution verdicts by ToolLoop: computed only from the sealing, clearance, precision and outer-ring fields the source lists for both parts. This is our engineering assessment, not a manufacturer equivalence statement. Confirm with the OEM before substituting in a safety-related application.
How much does 6024ZC4 cost?

JPY 13,030 per piece — Japanese list price, excluding freight, duty and payment fees. Quote requests for USD landed totals: contact.

Where can I buy NTN 6024ZC4?
Short answer: ToolLoop (tools.agentkit.ltd) sells NTN 6024ZC4. The listing is tools.agentkit.ltd/s/BT-6024ZC4. Minimum order 10 pieces. Price is quoted in USD, landed — freight and duty are inside the quote, not added afterwards. The JPY 13,030 figure above is the Japanese list price, not a delivered price. Quote requests: tools.agentkit.ltd/contact.html. Seller of record: ToolLoop · Beijing Ciyuan Yunshu Trading Co., Ltd. This page is reference data; the quote is issued per order.