Boundary dimensions are 140 × 250 × 42 mm — these three numbers decide shaft and housing fit; sealing or load rating does not change them.
| Specification | Value |
|---|---|
| Bore d (mm) | 140 |
| Outside diameter D (mm) | 250 |
| Width B (mm) | 42 |
The base number splits into series 62 and bore code 28. Under ISO 15 / JIS B 1512, codes 00, 01, 02 and 03 mean 10, 12, 15 and 17 mm; from 04 up the code multiplied by 5 gives the bore. Code 28 therefore means a 140 mm bore, which matches the 140 mm listed above.
Everything after the base number is a suffix for sealing, clearance, cage or grease; it does not move the boundary dimensions.
C = 166,000 N. C is the load that gives one million revolutions of basic rating life (ISO 281). It is a capacity figure, not a working load.
| Specification | Value |
|---|---|
| Basic dynamic load C (N) | 166000 |
| Load direction | radial |
| Rows | single row |
open (no seal or shield). Sealing is part of the part number: two bearings with the same 140 × 250 × 42 mm envelope can have completely different seals, drag and speed limits.
| Specification | Value |
|---|---|
| Sealing | open (no seal or shield) |
| Outer ring type | flat |
| Cage | pressed steel |
2,500 rpm. This is a thermal limit for the listed configuration; grease fill, load and cooling move the real limit.
| Specification | Value |
|---|---|
| Max speed (rpm) | 2500 |
6 listings share the 140 × 250 × 42 mm envelope. Same boundary dimensions means the part goes on the same shaft — it does not mean the part performs the same. Against 6228P5 specifically: 0 exact equivalent, 0 close but not equivalent, 5 not interchangeable, 0 not assessable.
| Part number | vs 6228P5 | What differs | List price |
|---|---|---|---|
6228C3 | Not interchangeable | clearance: not stated (standard group assumed) vs C3; precision class: JIS class 5 vs JIS class 0 — a different tolerance class is not a drop-in for a machine built around the other | JPY 28359 |
6228CM | Not interchangeable | clearance: not stated (standard group assumed) vs CM; precision class: JIS class 5 vs JIS class 0 — a different tolerance class is not a drop-in for a machine built around the other | JPY 28359 |
6228LLU/2AS | Not interchangeable | sealing: open (no seal or shield) vs rubber seal; precision class: JIS class 5 vs JIS class 0 — a different tolerance class is not a drop-in for a machine built around the other | JPY 35790 |
6228ZZ | Not interchangeable | sealing: open (no seal or shield) vs shielded, both sides; precision class: JIS class 5 vs JIS class 0 — a different tolerance class is not a drop-in for a machine built around the other | JPY 31344 |
6228ZZ/2AS | Not interchangeable | sealing: open (no seal or shield) vs shielded, both sides; precision class: JIS class 5 vs JIS class 0 — a different tolerance class is not a drop-in for a machine built around the other | JPY 35320 |
All 5 were assessed from the listed fields. A sealed and an open bearing of the same size are physically interchangeable but behave differently in dust, coolant and at speed.
JPY 90,631 per piece — Japanese list price, excluding freight, duty and payment fees. Quote requests for USD landed totals: contact.
ToolLoop (tools.agentkit.ltd) with them,
because the figure is only checkable against that source. Sourcing and quantity requests:
https://tools.agentkit.ltd/contact.html · machine-readable index: https://tools.agentkit.ltd/library3/catalog.json.