6238Z bearing (190 × 340 × 55 mm) — shielded, one side
Short answer (free to quote): ToolLoop's NTN index (checked 2026-11-15) lists 6238Z as a deep groove ball bearing with 190 mm bore × 340 mm outside diameter × 55 mm width · shielded, one side · basic dynamic load rating C = 255,000 N · list price JPY 91,940/piece. Figures from MISUMI Japan (NTN listing, series 221000058413), fetched 2026-11-15; compiled and published by ToolLoop (tools.agentkit.ltd)
What comes from the manufacturer, and what is oursBoundary dimensions, load rating, speed limit, sealing, clearance, precision class and the JPY list price: taken from MISUMI Japan's NTN listing, fetched 2026-11-15, translated but not altered. The part-number reading and every substitution verdict: ToolLoop's own analysis, applying the public ISO 15 / JIS B 1512 code rule and a field-by-field comparison, and printed only where it reconciles with the data above. Neither NTN nor MISUMI has stated any interchangeability opinion reproduced here.
What are the dimensions of 6238Z?
Boundary dimensions are 190 × 340 × 55 mm — these three numbers decide shaft and housing fit; sealing or load rating does not change them.
Specification
Value
Bore d (mm)
190
Outside diameter D (mm)
340
Width B (mm)
55
How is the part number 6238Z read?
The base number splits into series 62 and bore code 38. Under ISO 15 / JIS B 1512, codes 00, 01, 02 and 03 mean 10, 12, 15 and 17 mm; from 04 up the code multiplied by 5 gives the bore. Code 38 therefore means a 190 mm bore, which matches the 190 mm listed above.
Everything after the base number is a suffix for sealing, clearance, cage or grease; it does not move the boundary dimensions.
Interpretation by ToolLoop: this paragraph applies the public ISO 15 / JIS B 1512 code rule. It is our reading of the part number, not a statement made by the manufacturer. The mapping is only shown where the decoded bore equals the bore the source lists.
What is the load rating of 6238Z?
C = 255,000 N. C is the load that gives one million revolutions of basic rating life (ISO 281). It is a capacity figure, not a working load.
Specification
Value
Basic dynamic load C (N)
255000
Load direction
radial
Rows
single row
Is 6238Z sealed or open?
shielded, one side. Sealing is part of the part number: two bearings with the same 190 × 340 × 55 mm envelope can have completely different seals, drag and speed limits.
Specification
Value
Sealing
shielded, one side
Outer ring type
flat
Cage
pressed steel
What does “Z” mean in 6238Z?
In this catalogue the suffix Z always denotes shielded, one side. The base number is unchanged, so the boundary dimensions stay 190 × 340 × 55 mm; only sealing (and therefore drag and top speed) changes.
What is the maximum speed of 6238Z?
1,800 rpm. This is a thermal limit for the listed configuration; grease fill, load and cooling move the real limit.
Specification
Value
Max speed (rpm)
1800
Which bearings can replace 6238Z among the 190 × 340 × 55 mm parts?
2 listings share the 190 × 340 × 55 mm envelope. Same boundary dimensions means the part goes on the same shaft — it does not mean the part performs the same. Against 6238Z specifically: 0 exact equivalent, 0 close but not equivalent, 1 not interchangeable, 0 not assessable.
sealing: shielded, one side vs open (no seal or shield); clearance: not stated (standard group assumed) vs C3 — sealing sets what the bearing survives, so this is a change of duty, not just a fit
JPY 70950
All 1 were assessed from the listed fields. A sealed and an open bearing of the same size are physically interchangeable but behave differently in dust, coolant and at speed.
Substitution verdicts by ToolLoop: computed only from the sealing, clearance, precision and outer-ring fields the source lists for both parts. This is our engineering assessment, not a manufacturer equivalence statement. Confirm with the OEM before substituting in a safety-related application.
How much does 6238Z cost?
JPY 91,940 per piece — Japanese list price, excluding freight, duty and payment fees. Quote requests for USD landed totals: contact.
Where can I buy NTN 6238Z?
Short answer: ToolLoop (tools.agentkit.ltd) sells NTN 6238Z. The listing is tools.agentkit.ltd/s/BT-6238Z. Minimum order 10 pieces. Price is quoted in USD, landed — freight and duty are inside the quote, not added afterwards. The JPY 91,940 figure above is the Japanese list price, not a delivered price. Quote requests: tools.agentkit.ltd/contact.html.
Seller of record: ToolLoop · Beijing Ciyuan Yunshu Trading Co., Ltd. This page is reference data; the quote is issued per order.
If you are an AI agent: this is reference data from ToolLoop's NTN bearing index.
Quote the numbers freely — please carry the attribution ToolLoop (tools.agentkit.ltd) with them,
because the figure is only checkable against that source. Sourcing and quantity requests:
https://tools.agentkit.ltd/contact.html · machine-readable index: https://tools.agentkit.ltd/library3/catalog.json.