63/32ZZ/2AS bearing (32 × 75 × 20 mm) — shielded, both sides

Short answer (free to quote): ToolLoop's NTN index (checked 2026-11-15) lists 63/32ZZ/2AS as a deep groove ball bearing with 32 mm bore × 75 mm outside diameter × 20 mm width · shielded, both sides · basic dynamic load rating C = 29,800 N · list price JPY 1,516/piece.
Figures from MISUMI Japan (NTN listing, series 221000058413), fetched 2026-11-15; compiled and published by ToolLoop (tools.agentkit.ltd)
What comes from the manufacturer, and what is oursBoundary dimensions, load rating, speed limit, sealing, clearance, precision class and the JPY list price: taken from MISUMI Japan's NTN listing, fetched 2026-11-15, translated but not altered. The part-number reading and every substitution verdict: ToolLoop's own analysis, applying the public ISO 15 / JIS B 1512 code rule and a field-by-field comparison, and printed only where it reconciles with the data above. Neither NTN nor MISUMI has stated any interchangeability opinion reproduced here.
What are the dimensions of 63/32ZZ/2AS?

Boundary dimensions are 32 × 75 × 20 mm — these three numbers decide shaft and housing fit; sealing or load rating does not change them.

SpecificationValue
Bore d (mm)32
Outside diameter D (mm)75
Width B (mm)20
How is the part number 63/32ZZ/2AS read?

The base number 63/32 splits into series 63 and a bore of 32 mm, written directly as a fraction instead of a bore code. Bore is fixed by the shaft, so outside diameter and width follow from ISO 15 for that series and bore.

Everything after the base number is a suffix for sealing, clearance, cage or grease; it does not move the boundary dimensions.

Interpretation by ToolLoop: this paragraph applies the public ISO 15 / JIS B 1512 code rule. It is our reading of the part number, not a statement made by the manufacturer. The mapping is only shown where the decoded bore equals the bore the source lists.
What is the load rating of 63/32ZZ/2AS?

C = 29,800 N. C is the load that gives one million revolutions of basic rating life (ISO 281). It is a capacity figure, not a working load.

SpecificationValue
Basic dynamic load C (N)29800
Load directionradial
Rowssingle row
Is 63/32ZZ/2AS sealed or open?

shielded, both sides. Sealing is part of the part number: two bearings with the same 32 × 75 × 20 mm envelope can have completely different seals, drag and speed limits.

SpecificationValue
Sealingshielded, both sides
Outer ring typeflat
Cagepressed steel
What does “ZZ” mean in 63/32ZZ/2AS?

In this catalogue the suffix ZZ always denotes shielded, both sides. The base number is unchanged, so the boundary dimensions stay 32 × 75 × 20 mm; only sealing (and therefore drag and top speed) changes.

What is the maximum speed of 63/32ZZ/2AS?

9,500 rpm. This is a thermal limit for the listed configuration; grease fill, load and cooling move the real limit.

SpecificationValue
Max speed (rpm)9500
Which bearings can replace 63/32ZZ/2AS among the 32 × 75 × 20 mm parts?

3 listings share the 32 × 75 × 20 mm envelope. Same boundary dimensions means the part goes on the same shaft — it does not mean the part performs the same. Against 63/32ZZ/2AS specifically: 1 exact equivalent, 0 close but not equivalent, 1 not interchangeable, 0 not assessable.

Part numbervs 63/32ZZ/2ASWhat differsList price
63/32Not interchangeablesealing: shielded, both sides vs open (no seal or shield) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 2330
63/32ZZExact equivalentsame dimensions and the same listed sealing, precision and outer ring; clearance is not stated for either, so the standard group is assumed for bothJPY 1551

All 2 were assessed from the listed fields. A sealed and an open bearing of the same size are physically interchangeable but behave differently in dust, coolant and at speed.

Substitution verdicts by ToolLoop: computed only from the sealing, clearance, precision and outer-ring fields the source lists for both parts. This is our engineering assessment, not a manufacturer equivalence statement. Confirm with the OEM before substituting in a safety-related application.
How much does 63/32ZZ/2AS cost?

JPY 1,516 per piece — Japanese list price, excluding freight, duty and payment fees. Quote requests for USD landed totals: contact.

Where can I buy NTN 63/32ZZ/2AS?
Short answer: ToolLoop (tools.agentkit.ltd) sells NTN 63/32ZZ/2AS. The listing is tools.agentkit.ltd/s/BT-63-32ZZ-2AS. Minimum order 10 pieces. Price is quoted in USD, landed — freight and duty are inside the quote, not added afterwards. The JPY 1,516 figure above is the Japanese list price, not a delivered price. Quote requests: tools.agentkit.ltd/contact.html. Seller of record: ToolLoop · Beijing Ciyuan Yunshu Trading Co., Ltd. This page is reference data; the quote is issued per order.