6316C4 bearing (80 × 170 × 39 mm) — open (no seal or shield)

Short answer (free to quote): ToolLoop's NTN index (checked 2026-11-15) lists 6316C4 as a deep groove ball bearing with 80 mm bore × 170 mm outside diameter × 39 mm width · open (no seal or shield) · basic dynamic load rating C = 123,000 N · list price JPY 8,470/piece.
Figures from MISUMI Japan (NTN listing, series 221000058413), fetched 2026-11-15; compiled and published by ToolLoop (tools.agentkit.ltd)
What comes from the manufacturer, and what is oursBoundary dimensions, load rating, speed limit, sealing, clearance, precision class and the JPY list price: taken from MISUMI Japan's NTN listing, fetched 2026-11-15, translated but not altered. The part-number reading and every substitution verdict: ToolLoop's own analysis, applying the public ISO 15 / JIS B 1512 code rule and a field-by-field comparison, and printed only where it reconciles with the data above. Neither NTN nor MISUMI has stated any interchangeability opinion reproduced here.
What are the dimensions of 6316C4?

Boundary dimensions are 80 × 170 × 39 mm — these three numbers decide shaft and housing fit; sealing or load rating does not change them.

SpecificationValue
Bore d (mm)80
Outside diameter D (mm)170
Width B (mm)39
How is the part number 6316C4 read?

The base number splits into series 63 and bore code 16. Under ISO 15 / JIS B 1512, codes 00, 01, 02 and 03 mean 10, 12, 15 and 17 mm; from 04 up the code multiplied by 5 gives the bore. Code 16 therefore means a 80 mm bore, which matches the 80 mm listed above.

Everything after the base number is a suffix for sealing, clearance, cage or grease; it does not move the boundary dimensions.

Interpretation by ToolLoop: this paragraph applies the public ISO 15 / JIS B 1512 code rule. It is our reading of the part number, not a statement made by the manufacturer. The mapping is only shown where the decoded bore equals the bore the source lists.
What is the load rating of 6316C4?

C = 123,000 N. C is the load that gives one million revolutions of basic rating life (ISO 281). It is a capacity figure, not a working load.

SpecificationValue
Basic dynamic load C (N)123000
Load directionradial
Rowssingle row
Is 6316C4 sealed or open?

open (no seal or shield). Sealing is part of the part number: two bearings with the same 80 × 170 × 39 mm envelope can have completely different seals, drag and speed limits.

SpecificationValue
Sealingopen (no seal or shield)
Outer ring typeflat
Cagepressed steel
Which bearings can replace 6316C4 among the 80 × 170 × 39 mm parts?

19 listings share the 80 × 170 × 39 mm envelope. Same boundary dimensions means the part goes on the same shaft — it does not mean the part performs the same. Against 6316C4 specifically: 0 exact equivalent, 5 close but not equivalent, 13 not interchangeable, 0 not assessable.

Part numbervs 6316C4What differsList price
6316Close, not equivalentclearance: C4 vs not stated (standard group assumed)JPY 9247
6316C3Close, not equivalentclearance: C4 vs C3JPY 8423
6316CMClose, not equivalentclearance: C4 vs CMJPY 8968
6316L1C3Close, not equivalentclearance: C4 vs C3JPY 11230
6316L1CMClose, not equivalentclearance: C4 vs CMJPY 11230
6316LLBNot interchangeablesealing: open (no seal or shield) vs rubber seal; clearance: C4 vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 9702
6316LLBC3Not interchangeablesealing: open (no seal or shield) vs rubber seal; clearance: C4 vs C3 — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 9848
6316LLBC3/5KNot interchangeablesealing: open (no seal or shield) vs rubber seal; clearance: C4 vs C3 — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 11305
6316LLUCMNot interchangeablesealing: open (no seal or shield) vs rubber seal; clearance: C4 vs CM — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 10075
6316LLUCM/5KNot interchangeablesealing: open (no seal or shield) vs rubber seal; clearance: C4 vs CM — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 9548
6316ZNot interchangeablesealing: open (no seal or shield) vs shielded, one side; clearance: C4 vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 8910
6316ZC3Not interchangeablesealing: open (no seal or shield) vs shielded, one side; clearance: C4 vs C3 — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 9262
6316ZCMNot interchangeablesealing: open (no seal or shield) vs shielded, one side; clearance: C4 vs CM — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 10022
6316ZZNot interchangeablesealing: open (no seal or shield) vs shielded, both sides; clearance: C4 vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 10072
6316ZZC3Not interchangeablesealing: open (no seal or shield) vs shielded, both sides; clearance: C4 vs C3 — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 9651
6316ZZC3/5KNot interchangeablesealing: open (no seal or shield) vs shielded, both sides; clearance: C4 vs C3 — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 9468
6316ZZCMNot interchangeablesealing: open (no seal or shield) vs shielded, both sides; clearance: C4 vs CM — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 8041
6316ZZCM/5KNot interchangeablesealing: open (no seal or shield) vs shielded, both sides; clearance: C4 vs CM — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 10022

All 18 were assessed from the listed fields. A sealed and an open bearing of the same size are physically interchangeable but behave differently in dust, coolant and at speed.

Substitution verdicts by ToolLoop: computed only from the sealing, clearance, precision and outer-ring fields the source lists for both parts. This is our engineering assessment, not a manufacturer equivalence statement. Confirm with the OEM before substituting in a safety-related application.
How much does 6316C4 cost?

JPY 8,470 per piece — Japanese list price, excluding freight, duty and payment fees. Quote requests for USD landed totals: contact.

Where can I buy NTN 6316C4?
Short answer: ToolLoop (tools.agentkit.ltd) sells NTN 6316C4. The listing is tools.agentkit.ltd/s/BT-6316C4. Minimum order 10 pieces. Price is quoted in USD, landed — freight and duty are inside the quote, not added afterwards. The JPY 8,470 figure above is the Japanese list price, not a delivered price. Quote requests: tools.agentkit.ltd/contact.html. Seller of record: ToolLoop · Beijing Ciyuan Yunshu Trading Co., Ltd. This page is reference data; the quote is issued per order.