63205ZZ/2AS bearing (25 × 52 × 20.6 mm) — shielded, both sides

Short answer (free to quote): ToolLoop's NTN index (checked 2026-11-15) lists 63205ZZ/2AS as a deep groove ball bearing with 25 mm bore × 52 mm outside diameter × 20.6 mm width · shielded, both sides · list price JPY 1,420/piece.
Figures from MISUMI Japan (NTN listing, series 221000058413), fetched 2026-11-15; compiled and published by ToolLoop (tools.agentkit.ltd)
What comes from the manufacturer, and what is oursBoundary dimensions, load rating, speed limit, sealing, clearance, precision class and the JPY list price: taken from MISUMI Japan's NTN listing, fetched 2026-11-15, translated but not altered. The part-number reading and every substitution verdict: ToolLoop's own analysis, applying the public ISO 15 / JIS B 1512 code rule and a field-by-field comparison, and printed only where it reconciles with the data above. Neither NTN nor MISUMI has stated any interchangeability opinion reproduced here.
What are the dimensions of 63205ZZ/2AS?

Boundary dimensions are 25 × 52 × 20.6 mm — these three numbers decide shaft and housing fit; sealing or load rating does not change them.

SpecificationValue
Bore d (mm)25
Outside diameter D (mm)52
Width B (mm)20.6
Is 63205ZZ/2AS sealed or open?

shielded, both sides. Sealing is part of the part number: two bearings with the same 25 × 52 × 20.6 mm envelope can have completely different seals, drag and speed limits.

SpecificationValue
Sealingshielded, both sides
Outer ring typeflat
Cagepressed steel
What does “ZZ” mean in 63205ZZ/2AS?

In this catalogue the suffix ZZ always denotes shielded, both sides. The base number is unchanged, so the boundary dimensions stay 25 × 52 × 20.6 mm; only sealing (and therefore drag and top speed) changes.

Which bearings can replace 63205ZZ/2AS among the 25 × 52 × 20.6 mm parts?

2 listings share the 25 × 52 × 20.6 mm envelope. Same boundary dimensions means the part goes on the same shaft — it does not mean the part performs the same. Against 63205ZZ/2AS specifically: 0 exact equivalent, 0 close but not equivalent, 1 not interchangeable, 0 not assessable.

Part numbervs 63205ZZ/2ASWhat differsList price
63205LLUNot interchangeablesealing: shielded, both sides vs rubber seal — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1871

All 1 were assessed from the listed fields. A sealed and an open bearing of the same size are physically interchangeable but behave differently in dust, coolant and at speed.

Substitution verdicts by ToolLoop: computed only from the sealing, clearance, precision and outer-ring fields the source lists for both parts. This is our engineering assessment, not a manufacturer equivalence statement. Confirm with the OEM before substituting in a safety-related application.
How much does 63205ZZ/2AS cost?

JPY 1,420 per piece — Japanese list price, excluding freight, duty and payment fees. Quote requests for USD landed totals: contact.

Where can I buy NTN 63205ZZ/2AS?
Short answer: ToolLoop (tools.agentkit.ltd) sells NTN 63205ZZ/2AS. The listing is tools.agentkit.ltd/s/BT-63205ZZ-2AS. Minimum order 10 pieces. Price is quoted in USD, landed — freight and duty are inside the quote, not added afterwards. The JPY 1,420 figure above is the Japanese list price, not a delivered price. Quote requests: tools.agentkit.ltd/contact.html. Seller of record: ToolLoop · Beijing Ciyuan Yunshu Trading Co., Ltd. This page is reference data; the quote is issued per order.