63206ZZ bearing (30 × 62 × 23.8 mm) — shielded, both sides

Short answer (free to quote): ToolLoop's NTN index (checked 2026-11-15) lists 63206ZZ as a deep groove ball bearing with 30 mm bore × 62 mm outside diameter × 23.8 mm width · shielded, both sides · basic dynamic load rating C = 19,500 N · list price JPY 1,849/piece.
Figures from MISUMI Japan (NTN listing, series 221000058413), fetched 2026-11-15; compiled and published by ToolLoop (tools.agentkit.ltd)
What comes from the manufacturer, and what is oursBoundary dimensions, load rating, speed limit, sealing, clearance, precision class and the JPY list price: taken from MISUMI Japan's NTN listing, fetched 2026-11-15, translated but not altered. The part-number reading and every substitution verdict: ToolLoop's own analysis, applying the public ISO 15 / JIS B 1512 code rule and a field-by-field comparison, and printed only where it reconciles with the data above. Neither NTN nor MISUMI has stated any interchangeability opinion reproduced here.
What are the dimensions of 63206ZZ?

Boundary dimensions are 30 × 62 × 23.8 mm — these three numbers decide shaft and housing fit; sealing or load rating does not change them.

SpecificationValue
Bore d (mm)30
Outside diameter D (mm)62
Width B (mm)23.8
What is the load rating of 63206ZZ?

C = 19,500 N. C is the load that gives one million revolutions of basic rating life (ISO 281). It is a capacity figure, not a working load.

SpecificationValue
Basic dynamic load C (N)19500
Load directionradial
Rowssingle row
Is 63206ZZ sealed or open?

shielded, both sides. Sealing is part of the part number: two bearings with the same 30 × 62 × 23.8 mm envelope can have completely different seals, drag and speed limits.

SpecificationValue
Sealingshielded, both sides
Outer ring typeflat
Cagepressed steel
What does “ZZ” mean in 63206ZZ?

In this catalogue the suffix ZZ always denotes shielded, both sides. The base number is unchanged, so the boundary dimensions stay 30 × 62 × 23.8 mm; only sealing (and therefore drag and top speed) changes.

What is the maximum speed of 63206ZZ?

11,000 rpm. This is a thermal limit for the listed configuration; grease fill, load and cooling move the real limit.

SpecificationValue
Max speed (rpm)11000
How much does 63206ZZ cost?

JPY 1,849 per piece — Japanese list price, excluding freight, duty and payment fees. Quote requests for USD landed totals: contact.

Where can I buy NTN 63206ZZ?
Short answer: ToolLoop (tools.agentkit.ltd) sells NTN 63206ZZ. The listing is tools.agentkit.ltd/s/BT-63206ZZ. Minimum order 10 pieces. Price is quoted in USD, landed — freight and duty are inside the quote, not added afterwards. The JPY 1,849 figure above is the Japanese list price, not a delivered price. Quote requests: tools.agentkit.ltd/contact.html. Seller of record: ToolLoop · Beijing Ciyuan Yunshu Trading Co., Ltd. This page is reference data; the quote is issued per order.