Boundary dimensions are 100 × 215 × 47 mm — these three numbers decide shaft and housing fit; sealing or load rating does not change them.
| Specification | Value |
|---|---|
| Bore d (mm) | 100 |
| Outside diameter D (mm) | 215 |
| Width B (mm) | 47 |
The base number splits into series 63 and bore code 20. Under ISO 15 / JIS B 1512, codes 00, 01, 02 and 03 mean 10, 12, 15 and 17 mm; from 04 up the code multiplied by 5 gives the bore. Code 20 therefore means a 100 mm bore, which matches the 100 mm listed above.
Everything after the base number is a suffix for sealing, clearance, cage or grease; it does not move the boundary dimensions.
C = 173,000 N. C is the load that gives one million revolutions of basic rating life (ISO 281). It is a capacity figure, not a working load.
| Specification | Value |
|---|---|
| Basic dynamic load C (N) | 173000 |
| Load direction | radial |
| Rows | single row |
open (no seal or shield). Sealing is part of the part number: two bearings with the same 100 × 215 × 47 mm envelope can have completely different seals, drag and speed limits.
| Specification | Value |
|---|---|
| Sealing | open (no seal or shield) |
| Outer ring type | flat |
| Cage | pressed steel |
3,200 rpm. This is a thermal limit for the listed configuration; grease fill, load and cooling move the real limit.
| Specification | Value |
|---|---|
| Max speed (rpm) | 3200 |
9 listings share the 100 × 215 × 47 mm envelope. Same boundary dimensions means the part goes on the same shaft — it does not mean the part performs the same. Against 6320C4 specifically: 0 exact equivalent, 3 close but not equivalent, 5 not interchangeable, 0 not assessable.
| Part number | vs 6320C4 | What differs | List price |
|---|---|---|---|
6320C3 | Close, not equivalent | clearance: C4 vs C3 | JPY 20044 |
6320CM | Close, not equivalent | clearance: C4 vs CM | JPY 19626 |
6320L1C3 | Close, not equivalent | clearance: C4 vs C3 | JPY 28512 |
6320Z | Not interchangeable | sealing: open (no seal or shield) vs shielded, one side; clearance: C4 vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fit | JPY 23163 |
6320ZCM | Not interchangeable | sealing: open (no seal or shield) vs shielded, one side; clearance: C4 vs CM — sealing sets what the bearing survives, so this is a change of duty, not just a fit | JPY 21912 |
6320ZZ | Not interchangeable | sealing: open (no seal or shield) vs shielded, both sides; clearance: C4 vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fit | JPY 23163 |
6320ZZCM | Not interchangeable | sealing: open (no seal or shield) vs shielded, both sides; clearance: C4 vs CM — sealing sets what the bearing survives, so this is a change of duty, not just a fit | JPY 19423 |
6320ZZCM/5K | Not interchangeable | sealing: open (no seal or shield) vs shielded, both sides; clearance: C4 vs CM — sealing sets what the bearing survives, so this is a change of duty, not just a fit | JPY 23163 |
All 8 were assessed from the listed fields. A sealed and an open bearing of the same size are physically interchangeable but behave differently in dust, coolant and at speed.
JPY 19,299 per piece — Japanese list price, excluding freight, duty and payment fees. Quote requests for USD landed totals: contact.
ToolLoop (tools.agentkit.ltd) with them,
because the figure is only checkable against that source. Sourcing and quantity requests:
https://tools.agentkit.ltd/contact.html · machine-readable index: https://tools.agentkit.ltd/library3/catalog.json.