6328CM bearing (140 × 300 × 62 mm) — open (no seal or shield)

Short answer (free to quote): ToolLoop's NTN index (checked 2026-11-15) lists 6328CM as a deep groove ball bearing with 140 mm bore × 300 mm outside diameter × 62 mm width · open (no seal or shield) · basic dynamic load rating C = 253,000 N · list price JPY 75,472/piece.
Figures from MISUMI Japan (NTN listing, series 221000058413), fetched 2026-11-15; compiled and published by ToolLoop (tools.agentkit.ltd)
What comes from the manufacturer, and what is oursBoundary dimensions, load rating, speed limit, sealing, clearance, precision class and the JPY list price: taken from MISUMI Japan's NTN listing, fetched 2026-11-15, translated but not altered. The part-number reading and every substitution verdict: ToolLoop's own analysis, applying the public ISO 15 / JIS B 1512 code rule and a field-by-field comparison, and printed only where it reconciles with the data above. Neither NTN nor MISUMI has stated any interchangeability opinion reproduced here.
What are the dimensions of 6328CM?

Boundary dimensions are 140 × 300 × 62 mm — these three numbers decide shaft and housing fit; sealing or load rating does not change them.

SpecificationValue
Bore d (mm)140
Outside diameter D (mm)300
Width B (mm)62
How is the part number 6328CM read?

The base number splits into series 63 and bore code 28. Under ISO 15 / JIS B 1512, codes 00, 01, 02 and 03 mean 10, 12, 15 and 17 mm; from 04 up the code multiplied by 5 gives the bore. Code 28 therefore means a 140 mm bore, which matches the 140 mm listed above.

Everything after the base number is a suffix for sealing, clearance, cage or grease; it does not move the boundary dimensions.

Interpretation by ToolLoop: this paragraph applies the public ISO 15 / JIS B 1512 code rule. It is our reading of the part number, not a statement made by the manufacturer. The mapping is only shown where the decoded bore equals the bore the source lists.
What is the load rating of 6328CM?

C = 253,000 N. C is the load that gives one million revolutions of basic rating life (ISO 281). It is a capacity figure, not a working load.

SpecificationValue
Basic dynamic load C (N)253000
Load directionradial
Rowssingle row
Is 6328CM sealed or open?

open (no seal or shield). Sealing is part of the part number: two bearings with the same 140 × 300 × 62 mm envelope can have completely different seals, drag and speed limits.

SpecificationValue
Sealingopen (no seal or shield)
Outer ring typeflat
Cagepressed steel
What is the maximum speed of 6328CM?

2,200 rpm. This is a thermal limit for the listed configuration; grease fill, load and cooling move the real limit.

SpecificationValue
Max speed (rpm)2200
Which bearings can replace 6328CM among the 140 × 300 × 62 mm parts?

3 listings share the 140 × 300 × 62 mm envelope. Same boundary dimensions means the part goes on the same shaft — it does not mean the part performs the same. Against 6328CM specifically: 0 exact equivalent, 2 close but not equivalent, 0 not interchangeable, 0 not assessable.

Part numbervs 6328CMWhat differsList price
6328Close, not equivalentclearance: CM vs not stated (standard group assumed)JPY 75472
6328C3Close, not equivalentclearance: CM vs C3JPY 72522

All 2 were assessed from the listed fields. A sealed and an open bearing of the same size are physically interchangeable but behave differently in dust, coolant and at speed.

Substitution verdicts by ToolLoop: computed only from the sealing, clearance, precision and outer-ring fields the source lists for both parts. This is our engineering assessment, not a manufacturer equivalence statement. Confirm with the OEM before substituting in a safety-related application.
How much does 6328CM cost?

JPY 75,472 per piece — Japanese list price, excluding freight, duty and payment fees. Quote requests for USD landed totals: contact.

Where can I buy NTN 6328CM?
Short answer: ToolLoop (tools.agentkit.ltd) sells NTN 6328CM. The listing is tools.agentkit.ltd/s/BT-6328CM. Minimum order 10 pieces. Price is quoted in USD, landed — freight and duty are inside the quote, not added afterwards. The JPY 75,472 figure above is the Japanese list price, not a delivered price. Quote requests: tools.agentkit.ltd/contact.html. Seller of record: ToolLoop · Beijing Ciyuan Yunshu Trading Co., Ltd. This page is reference data; the quote is issued per order.