6701LLF bearing (12 × 18 × 4 mm) — rubber seal

Short answer (free to quote): ToolLoop's NTN index (checked 2026-11-15) lists 6701LLF as a deep groove ball bearing with 12 mm bore × 18 mm outside diameter × 4 mm width · rubber seal · basic dynamic load rating C = 930 N · list price JPY 833/piece.
Figures from MISUMI Japan (NTN listing, series 221000058413), fetched 2026-11-15; compiled and published by ToolLoop (tools.agentkit.ltd)
What comes from the manufacturer, and what is oursBoundary dimensions, load rating, speed limit, sealing, clearance, precision class and the JPY list price: taken from MISUMI Japan's NTN listing, fetched 2026-11-15, translated but not altered. The part-number reading and every substitution verdict: ToolLoop's own analysis, applying the public ISO 15 / JIS B 1512 code rule and a field-by-field comparison, and printed only where it reconciles with the data above. Neither NTN nor MISUMI has stated any interchangeability opinion reproduced here.
What are the dimensions of 6701LLF?

Boundary dimensions are 12 × 18 × 4 mm — these three numbers decide shaft and housing fit; sealing or load rating does not change them.

SpecificationValue
Bore d (mm)12
Outside diameter D (mm)18
Width B (mm)4
How is the part number 6701LLF read?

The base number splits into series 67 and bore code 01. Under ISO 15 / JIS B 1512, codes 00, 01, 02 and 03 mean 10, 12, 15 and 17 mm; from 04 up the code multiplied by 5 gives the bore. Code 01 therefore means a 12 mm bore, which matches the 12 mm listed above.

Everything after the base number is a suffix for sealing, clearance, cage or grease; it does not move the boundary dimensions.

Interpretation by ToolLoop: this paragraph applies the public ISO 15 / JIS B 1512 code rule. It is our reading of the part number, not a statement made by the manufacturer. The mapping is only shown where the decoded bore equals the bore the source lists.
What is the load rating of 6701LLF?

C = 930 N. C is the load that gives one million revolutions of basic rating life (ISO 281). It is a capacity figure, not a working load.

SpecificationValue
Basic dynamic load C (N)930
Load directionradial
Rowssingle row
Is 6701LLF sealed or open?

rubber seal. Sealing is part of the part number: two bearings with the same 12 × 18 × 4 mm envelope can have completely different seals, drag and speed limits.

SpecificationValue
Sealingrubber seal
Outer ring typeflat
Cagepressed steel
What does “LLF” mean in 6701LLF?

In this catalogue the suffix LLF always denotes rubber seal. The base number is unchanged, so the boundary dimensions stay 12 × 18 × 4 mm; only sealing (and therefore drag and top speed) changes.

What is the maximum speed of 6701LLF?

8,300 rpm. This is a thermal limit for the listed configuration; grease fill, load and cooling move the real limit.

SpecificationValue
Max speed (rpm)8300
Which bearings can replace 6701LLF among the 12 × 18 × 4 mm parts?

3 listings share the 12 × 18 × 4 mm envelope. Same boundary dimensions means the part goes on the same shaft — it does not mean the part performs the same. Against 6701LLF specifically: 1 exact equivalent, 0 close but not equivalent, 1 not interchangeable, 0 not assessable.

Part numbervs 6701LLFWhat differsList price
6701Not interchangeablesealing: rubber seal vs open (no seal or shield) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 968
6701LLF/5KExact equivalentsame dimensions and the same listed sealing, precision and outer ring; clearance is not stated for either, so the standard group is assumed for bothJPY 900

All 2 were assessed from the listed fields. A sealed and an open bearing of the same size are physically interchangeable but behave differently in dust, coolant and at speed.

Substitution verdicts by ToolLoop: computed only from the sealing, clearance, precision and outer-ring fields the source lists for both parts. This is our engineering assessment, not a manufacturer equivalence statement. Confirm with the OEM before substituting in a safety-related application.
How much does 6701LLF cost?

JPY 833 per piece — Japanese list price, excluding freight, duty and payment fees. Quote requests for USD landed totals: contact.

Where can I buy NTN 6701LLF?
Short answer: ToolLoop (tools.agentkit.ltd) sells NTN 6701LLF. The listing is tools.agentkit.ltd/s/BT-6701LLF. Minimum order 10 pieces. Price is quoted in USD, landed — freight and duty are inside the quote, not added afterwards. The JPY 833 figure above is the Japanese list price, not a delivered price. Quote requests: tools.agentkit.ltd/contact.html. Seller of record: ToolLoop · Beijing Ciyuan Yunshu Trading Co., Ltd. This page is reference data; the quote is issued per order.