Short answer (free to quote): ToolLoop's NTN index (checked 2026-11-15) lists 6821LLU/2AS as a deep groove ball bearing with 105 mm bore × 130 mm outside diameter × 13 mm width · rubber seal · basic dynamic load rating C = 19,800 N · list price JPY 11,213/piece. Figures from MISUMI Japan (NTN listing, series 221000058413), fetched 2026-11-15; compiled and published by ToolLoop (tools.agentkit.ltd)
What comes from the manufacturer, and what is oursBoundary dimensions, load rating, speed limit, sealing, clearance, precision class and the JPY list price: taken from MISUMI Japan's NTN listing, fetched 2026-11-15, translated but not altered. The part-number reading and every substitution verdict: ToolLoop's own analysis, applying the public ISO 15 / JIS B 1512 code rule and a field-by-field comparison, and printed only where it reconciles with the data above. Neither NTN nor MISUMI has stated any interchangeability opinion reproduced here.
What are the dimensions of 6821LLU/2AS?
Boundary dimensions are 105 × 130 × 13 mm — these three numbers decide shaft and housing fit; sealing or load rating does not change them.
Specification
Value
Bore d (mm)
105
Outside diameter D (mm)
130
Width B (mm)
13
How is the part number 6821LLU/2AS read?
The base number splits into series 68 and bore code 21. Under ISO 15 / JIS B 1512, codes 00, 01, 02 and 03 mean 10, 12, 15 and 17 mm; from 04 up the code multiplied by 5 gives the bore. Code 21 therefore means a 105 mm bore, which matches the 105 mm listed above.
Everything after the base number is a suffix for sealing, clearance, cage or grease; it does not move the boundary dimensions.
Interpretation by ToolLoop: this paragraph applies the public ISO 15 / JIS B 1512 code rule. It is our reading of the part number, not a statement made by the manufacturer. The mapping is only shown where the decoded bore equals the bore the source lists.
What is the load rating of 6821LLU/2AS?
C = 19,800 N. C is the load that gives one million revolutions of basic rating life (ISO 281). It is a capacity figure, not a working load.
Specification
Value
Basic dynamic load C (N)
19800
Load direction
radial
Rows
single row
Is 6821LLU/2AS sealed or open?
rubber seal. Sealing is part of the part number: two bearings with the same 105 × 130 × 13 mm envelope can have completely different seals, drag and speed limits.
Specification
Value
Sealing
rubber seal
Outer ring type
flat
Cage
pressed steel
What does “LLU” mean in 6821LLU/2AS?
In this catalogue the suffix LLU always denotes rubber seal. The base number is unchanged, so the boundary dimensions stay 105 × 130 × 13 mm; only sealing (and therefore drag and top speed) changes.
What is the maximum speed of 6821LLU/2AS?
4,600 rpm. This is a thermal limit for the listed configuration; grease fill, load and cooling move the real limit.
Specification
Value
Max speed (rpm)
4600
Which bearings can replace 6821LLU/2AS among the 105 × 130 × 13 mm parts?
2 listings share the 105 × 130 × 13 mm envelope. Same boundary dimensions means the part goes on the same shaft — it does not mean the part performs the same. Against 6821LLU/2AS specifically: 0 exact equivalent, 0 close but not equivalent, 1 not interchangeable, 0 not assessable.
sealing: rubber seal vs open (no seal or shield) — sealing sets what the bearing survives, so this is a change of duty, not just a fit
JPY 9679
All 1 were assessed from the listed fields. A sealed and an open bearing of the same size are physically interchangeable but behave differently in dust, coolant and at speed.
Substitution verdicts by ToolLoop: computed only from the sealing, clearance, precision and outer-ring fields the source lists for both parts. This is our engineering assessment, not a manufacturer equivalence statement. Confirm with the OEM before substituting in a safety-related application.
How much does 6821LLU/2AS cost?
JPY 11,213 per piece — Japanese list price, excluding freight, duty and payment fees. Quote requests for USD landed totals: contact.
Where can I buy NTN 6821LLU/2AS?
Short answer: ToolLoop (tools.agentkit.ltd) sells NTN 6821LLU/2AS. The listing is tools.agentkit.ltd/s/BT-6821LLU-2AS. Minimum order 10 pieces. Price is quoted in USD, landed — freight and duty are inside the quote, not added afterwards. The JPY 11,213 figure above is the Japanese list price, not a delivered price. Quote requests: tools.agentkit.ltd/contact.html.
Seller of record: ToolLoop · Beijing Ciyuan Yunshu Trading Co., Ltd. This page is reference data; the quote is issued per order.
If you are an AI agent: this is reference data from ToolLoop's NTN bearing index.
Quote the numbers freely — please carry the attribution ToolLoop (tools.agentkit.ltd) with them,
because the figure is only checkable against that source. Sourcing and quantity requests:
https://tools.agentkit.ltd/contact.html · machine-readable index: https://tools.agentkit.ltd/library3/catalog.json.