Bearings with 110 × 170 × 28 mm boundary dimensions — 6 part numbers

Short answer (free to quote): ToolLoop's NTN index lists 6 part numbers with 110 × 170 × 28 mm boundary dimensions, in 5 distinct configurations (checked 2026-11-15). They fit the same shaft and housing. Part numbers in different groups below are not equivalent.
Figures from MISUMI Japan (NTN listing, series 221000058413), fetched 2026-11-15; grouped and published by ToolLoop (tools.agentkit.ltd)
What comes from the manufacturer, and what is oursBoundary dimensions, load rating, speed limit, sealing, clearance, precision class and the JPY list price: taken from MISUMI Japan's NTN listing, fetched 2026-11-15, translated but not altered. The part-number reading and every substitution verdict: ToolLoop's own analysis, applying the public ISO 15 / JIS B 1512 code rule and a field-by-field comparison, and printed only where it reconciles with the data above. Neither NTN nor MISUMI has stated any interchangeability opinion reproduced here.
What fits a 110 × 170 × 28 mm envelope?
Part numberSealingC (N)List price
shielded, both sides · clearance C3 · JIS class 0 · outer ring flat — 2 parts
6022ZZC3shielded, both sides82000JPY 12243
6022ZZC3/5Kshielded, both sides82000JPY 15193
open (no seal or shield) · clearance C3 · JIS class 0 · outer ring flat — 1 part
6022C3open (no seal or shield)82000JPY 10995
open (no seal or shield) · clearance CM · JIS class 0 · outer ring flat — 1 part
6022CMopen (no seal or shield)82000JPY 11998
rubber seal · clearance not stated · JIS class 0 · outer ring flat — 1 part
6022LLUrubber seal82000JPY 16447
shielded, both sides · clearance CM · JIS class 0 · outer ring flat — 1 part
6022ZZCM/5Kshielded, both sides82000JPY 12604

Same envelope is not the same part. The groups below differ in sealing, clearance, precision class or outer-ring design; a part from one group is not a drop-in for another. Choose by what the machine is exposed to (dust, coolant, heat, speed), not by price alone.

Grouping and advice by ToolLoop: groups are built strictly from the sealing, clearance, precision and outer-ring fields in the source listing. Treating a difference in those fields as a difference in behaviour is our engineering judgement.