Bearings with 25 × 42 × 9 mm boundary dimensions — 15 part numbers

Short answer (free to quote): ToolLoop's NTN index lists 15 part numbers with 25 × 42 × 9 mm boundary dimensions, in 10 distinct configurations (checked 2026-11-15). They fit the same shaft and housing. Part numbers in different groups below are not equivalent.
Figures from MISUMI Japan (NTN listing, series 221000058413), fetched 2026-11-15; grouped and published by ToolLoop (tools.agentkit.ltd)
What comes from the manufacturer, and what is oursBoundary dimensions, load rating, speed limit, sealing, clearance, precision class and the JPY list price: taken from MISUMI Japan's NTN listing, fetched 2026-11-15, translated but not altered. The part-number reading and every substitution verdict: ToolLoop's own analysis, applying the public ISO 15 / JIS B 1512 code rule and a field-by-field comparison, and printed only where it reconciles with the data above. Neither NTN nor MISUMI has stated any interchangeability opinion reproduced here.
What fits a 25 × 42 × 9 mm envelope?
Part numberSealingC (N)List price
rubber seal · clearance not stated · JIS class 0 · outer ring flat — 4 parts
6905LLBrubber seal7050JPY 1032
6905LLB/2ASrubber seal7050JPY 855
6905LLUrubber seal7050JPY 932
6905LLU/2ASrubber seal7050JPY 1014
shielded, both sides · clearance not stated · JIS class 0 · outer ring flat — 2 parts
6905ZZshielded, both sides7050JPY 861
6905ZZ/LP03shielded, both sides7050JPY 1250
shielded, both sides · clearance not stated · JIS class 0 · outer ring with snap-ring groove (U-groove) — 2 parts
6905ZZNRshielded, both sides7050JPY 848
6905ZZNR/2ASshielded, both sides7050JPY 954
open (no seal or shield) · clearance not stated · JIS class 0 · outer ring flat — 1 part
6905open (no seal or shield)7050JPY 709
open (no seal or shield) · clearance C3 · JIS class 0 · outer ring flat — 1 part
6905C3open (no seal or shield)7050JPY 1020
rubber seal · clearance not stated · JIS class 0 · outer ring with snap-ring groove (U-groove) — 1 part
6905LLUNR/2ASrubber seal7050JPY 1240
open (no seal or shield) · clearance not stated · JIS class 0 · outer ring with snap-ring groove (U-groove) — 1 part
6905NRopen (no seal or shield)7050JPY 935
shielded, one side · clearance not stated · JIS class 0 · outer ring flat — 1 part
6905Zshielded, one side7050JPY 860
shielded, both sides · clearance C3 · JIS class 0 · outer ring flat — 1 part
6905ZZC3/5Kshielded, both sides7050JPY 1090
shielded, both sides · clearance CM · JIS class 0 · outer ring flat — 1 part
6905ZZCMshielded, both sides7050JPY 826

Same envelope is not the same part. The groups below differ in sealing, clearance, precision class or outer-ring design; a part from one group is not a drop-in for another. Choose by what the machine is exposed to (dust, coolant, heat, speed), not by price alone.

Grouping and advice by ToolLoop: groups are built strictly from the sealing, clearance, precision and outer-ring fields in the source listing. Treating a difference in those fields as a difference in behaviour is our engineering judgement.