Bearings with 40 × 52 × 7 mm boundary dimensions — 15 part numbers

Short answer (free to quote): ToolLoop's NTN index lists 15 part numbers with 40 × 52 × 7 mm boundary dimensions, in 4 distinct configurations (checked 2026-11-15). They fit the same shaft and housing. Part numbers in different groups below are not equivalent.
Figures from MISUMI Japan (NTN listing, series 221000058413), fetched 2026-11-15; grouped and published by ToolLoop (tools.agentkit.ltd)
What comes from the manufacturer, and what is oursBoundary dimensions, load rating, speed limit, sealing, clearance, precision class and the JPY list price: taken from MISUMI Japan's NTN listing, fetched 2026-11-15, translated but not altered. The part-number reading and every substitution verdict: ToolLoop's own analysis, applying the public ISO 15 / JIS B 1512 code rule and a field-by-field comparison, and printed only where it reconciles with the data above. Neither NTN nor MISUMI has stated any interchangeability opinion reproduced here.
What fits a 40 × 52 × 7 mm envelope?
Part numberSealingC (N)List price
rubber seal · clearance not stated · JIS class 0 · outer ring flat — 5 parts
6808JRLLBrubber seal5100JPY 1575
6808JRLLB/2ASrubber seal5100JPY 1856
6808LLBrubber seal5100JPY 1900
6808LLB/2ASrubber seal5100JPY 1430
6808LLUrubber seal5100JPY 1604
shielded, both sides · clearance not stated · JIS class 0 · outer ring flat — 5 parts
6808JRZZshielded, both sides5100JPY 1745
6808JRZZ/2ASshielded, both sides5100JPY 1483
6808ZZshielded, both sides5100JPY 1382
6808ZZ/2ASshielded, both sides5100JPY 1480
6808ZZ/5Kshielded, both sides5100JPY 1590
shielded, both sides · clearance not stated · JIS class 0 · outer ring with snap-ring groove (U-groove) — 3 parts
6808JRZZNRshielded, both sides5100JPY 1707
6808ZZNRshielded, both sides5100JPY 1835
6808ZZNR/2ASshielded, both sides5100JPY 1290
open (no seal or shield) · clearance not stated · JIS class 0 · outer ring flat — 2 parts
6808open (no seal or shield)5100JPY 1368
6808JRopen (no seal or shield)5100JPY 1291

Same envelope is not the same part. The groups below differ in sealing, clearance, precision class or outer-ring design; a part from one group is not a drop-in for another. Choose by what the machine is exposed to (dust, coolant, heat, speed), not by price alone.

Grouping and advice by ToolLoop: groups are built strictly from the sealing, clearance, precision and outer-ring fields in the source listing. Treating a difference in those fields as a difference in behaviour is our engineering judgement.