Bearings with 55 × 72 × 9 mm boundary dimensions — 10 part numbers

Short answer (free to quote): ToolLoop's NTN index lists 10 part numbers with 55 × 72 × 9 mm boundary dimensions, in 3 distinct configurations (checked 2026-11-15). They fit the same shaft and housing. Part numbers in different groups below are not equivalent.
Figures from MISUMI Japan (NTN listing, series 221000058413), fetched 2026-11-15; grouped and published by ToolLoop (tools.agentkit.ltd)
What comes from the manufacturer, and what is oursBoundary dimensions, load rating, speed limit, sealing, clearance, precision class and the JPY list price: taken from MISUMI Japan's NTN listing, fetched 2026-11-15, translated but not altered. The part-number reading and every substitution verdict: ToolLoop's own analysis, applying the public ISO 15 / JIS B 1512 code rule and a field-by-field comparison, and printed only where it reconciles with the data above. Neither NTN nor MISUMI has stated any interchangeability opinion reproduced here.
What fits a 55 × 72 × 9 mm envelope?
Part numberSealingC (N)List price
rubber seal · clearance not stated · JIS class 0 · outer ring flat — 5 parts
6811JRLLBrubber seal8800JPY 2284
6811JRLLB/2ASrubber seal8800JPY 2699
6811LLBrubber seal8800JPY 2690
6811LLB/2ASrubber seal8800JPY 2261
6811LLUrubber seal8800JPY 2930
shielded, both sides · clearance not stated · JIS class 0 · outer ring flat — 3 parts
6811JRZZshielded, both sides8800JPY 2042
6811JRZZ/5Kshielded, both sides8800JPY 2210
6811ZZshielded, both sides8800JPY 2801
open (no seal or shield) · clearance not stated · JIS class 0 · outer ring flat — 2 parts
6811open (no seal or shield)8800JPY 2077
6811JRopen (no seal or shield)8800JPY 2122

Same envelope is not the same part. The groups below differ in sealing, clearance, precision class or outer-ring design; a part from one group is not a drop-in for another. Choose by what the machine is exposed to (dust, coolant, heat, speed), not by price alone.

Grouping and advice by ToolLoop: groups are built strictly from the sealing, clearance, precision and outer-ring fields in the source listing. Treating a difference in those fields as a difference in behaviour is our engineering judgement.