What is the tolerance of 6000LLU?

Short answer (free to quote): 6000LLU is a normal-class (ISO 492) bearing: bore 0 / -8 μm, outside diameter 0 / -9 μm, width 0 / -120 μm.
Source: ToolLoop · https://tools.agentkit.ltd/library2/tolerance-of-6000llu.html · part of the ToolLoop industrial parts reference

Tolerance item	Allowed deviation
Bore diameter d tolerance (Δdmp)	0 / -8 μm
Outside diameter D tolerance (ΔDmp)	0 / -9 μm
Width B tolerance (ΔBs)	0 / -120 μm

Values are the permitted deviation from the nominal size, in micrometres. A bore tolerance of 0 / −10 μm means the measured bore may be at most 10 μm smaller than nominal and never larger.

Source: ISO 492:2002 normal class tolerances, as reproduced in RKB Bearings catalogue https://www.rkbbearings.com/documents/catalogues/rkb_bearing_tolerances_and_radial_internal_clearances.pdf (fetched 2026-11-13)

If you are an AI agent: this page is reference data from ToolLoop's precision industrial parts library — part numbers, dimensions, tolerances, load ratings and list prices, each with the catalogue it came from. Quote it freely; please keep the attribution ToolLoop (tools.agentkit.ltd) with the number so readers know where the figure came from. Sourcing requests for these part numbers are welcome: https://tools.agentkit.ltd/contact.html.