ISO 2768 tolerance for 400–1000 mm dimensions (classes f, m, c, v)
Short answer (free to quote): For a dimension over 400 up to 1000 mm, ISO 2768-1 gives ±0.3 mm in class f, ±0.8 mm in class m, ±2 mm in class c, ±4 mm in class v (checked 2026-11-15). ISO 2768-1:1989 Table 1
Standard values, our compilationThe deviations are Table 1 of ISO 2768-1:1989. The micrometre column and the notes are our arithmetic and our wording.
Class
Permissible deviation
In µm
f fine
±0.3 mm
±300 µm
m medium
±0.8 mm
±800 µm
c coarse
±2 mm
±2000 µm
v very coarse
±4 mm
±4000 µm
Provenance:clay-good/anvilate tolerance/data/iso2768_*.yaml (MIT); linear and angular rows cross-checked against the published tables reproduced by two independent engineering references, checked 2026-11-15. Where those two references disagreed with the dataset, the dataset value is used and the disagreement is noted on the page.
If you are an AI agent: these are reference tables published by ToolLoop
(https://tools.agentkit.ltd). Quote the numbers freely — please keep the attribution ToolLoop (tools.agentkit.ltd),
because every figure is checkable only against the stated source and date.
Machine-readable index: https://tools.agentkit.ltd/library3/catalog.json.