ISO 2768 tolerance for 6–30 mm dimensions (classes f, m, c, v)

Short answer (free to quote): For a dimension over 6 up to 30 mm, ISO 2768-1 gives ±0.1 mm in class f, ±0.2 mm in class m, ±0.5 mm in class c, ±1 mm in class v (checked 2026-11-15).
ISO 2768-1:1989 Table 1
Standard values, our compilationThe deviations are Table 1 of ISO 2768-1:1989. The micrometre column and the notes are our arithmetic and our wording.
ClassPermissible deviationIn µm
f fine±0.1 mm±100 µm
m medium±0.2 mm±200 µm
c coarse±0.5 mm±500 µm
v very coarse±1 mm±1000 µm
Provenance: clay-good/anvilate tolerance/data/iso2768_*.yaml (MIT); linear and angular rows cross-checked against the published tables reproduced by two independent engineering references, checked 2026-11-15. Where those two references disagreed with the dataset, the dataset value is used and the disagreement is noted on the page.

All ranges · ISO 286 fits