6207LLBCM/5K bearing (35 × 72 × 17 mm) — rubber seal

Short answer (free to quote): ToolLoop's NTN index (checked 2026-11-15) lists 6207LLBCM/5K as a deep groove ball bearing with 35 mm bore × 72 mm outside diameter × 17 mm width · rubber seal · basic dynamic load rating C = 25,700 N · list price JPY 1,291/piece.
Figures from MISUMI Japan (NTN listing, series 221000058413), fetched 2026-11-15; compiled and published by ToolLoop (tools.agentkit.ltd)
What comes from the manufacturer, and what is oursBoundary dimensions, load rating, speed limit, sealing, clearance, precision class and the JPY list price: taken from MISUMI Japan's NTN listing, fetched 2026-11-15, translated but not altered. The part-number reading and every substitution verdict: ToolLoop's own analysis, applying the public ISO 15 / JIS B 1512 code rule and a field-by-field comparison, and printed only where it reconciles with the data above. Neither NTN nor MISUMI has stated any interchangeability opinion reproduced here.
What are the dimensions of 6207LLBCM/5K?

Boundary dimensions are 35 × 72 × 17 mm — these three numbers decide shaft and housing fit; sealing or load rating does not change them.

SpecificationValue
Bore d (mm)35
Outside diameter D (mm)72
Width B (mm)17
How is the part number 6207LLBCM/5K read?

The base number splits into series 62 and bore code 07. Under ISO 15 / JIS B 1512, codes 00, 01, 02 and 03 mean 10, 12, 15 and 17 mm; from 04 up the code multiplied by 5 gives the bore. Code 07 therefore means a 35 mm bore, which matches the 35 mm listed above.

Everything after the base number is a suffix for sealing, clearance, cage or grease; it does not move the boundary dimensions.

Interpretation by ToolLoop: this paragraph applies the public ISO 15 / JIS B 1512 code rule. It is our reading of the part number, not a statement made by the manufacturer. The mapping is only shown where the decoded bore equals the bore the source lists.
What is the load rating of 6207LLBCM/5K?

C = 25,700 N. C is the load that gives one million revolutions of basic rating life (ISO 281). It is a capacity figure, not a working load.

SpecificationValue
Basic dynamic load C (N)25700
Load directionradial
Rowssingle row
Is 6207LLBCM/5K sealed or open?

rubber seal. Sealing is part of the part number: two bearings with the same 35 × 72 × 17 mm envelope can have completely different seals, drag and speed limits.

SpecificationValue
Sealingrubber seal
Outer ring typeflat
Cagepressed steel
What does “LLB” mean in 6207LLBCM/5K?

In this catalogue the suffix LLB always denotes rubber seal. The base number is unchanged, so the boundary dimensions stay 35 × 72 × 17 mm; only sealing (and therefore drag and top speed) changes.

What is the maximum speed of 6207LLBCM/5K?

9,800 rpm. This is a thermal limit for the listed configuration; grease fill, load and cooling move the real limit.

SpecificationValue
Max speed (rpm)9800
Which bearings can replace 6207LLBCM/5K among the 35 × 72 × 17 mm parts?

38 listings share the 35 × 72 × 17 mm envelope. Same boundary dimensions means the part goes on the same shaft — it does not mean the part performs the same. Against 6207LLBCM/5K specifically: 3 exact equivalent, 12 close but not equivalent, 22 not interchangeable, 0 not assessable.

Part numbervs 6207LLBCM/5KWhat differsList price
6207Not interchangeablesealing: rubber seal vs open (no seal or shield); clearance: CM vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1004
6207C3Not interchangeablesealing: rubber seal vs open (no seal or shield); clearance: CM vs C3 — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1017
6207C4Not interchangeablesealing: rubber seal vs open (no seal or shield); clearance: CM vs C4 — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 883
6207CMNot interchangeablesealing: rubber seal vs open (no seal or shield) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 868
6207L1C3Close, not equivalentclearance: CM vs C3JPY 1440
6207LBClose, not equivalentclearance: CM vs not stated (standard group assumed)JPY 1152
6207LLBClose, not equivalentclearance: CM vs not stated (standard group assumed)JPY 1347
6207LLBC3Close, not equivalentclearance: CM vs C3JPY 1205
6207LLBC3/5KClose, not equivalentclearance: CM vs C3JPY 2217
6207LLBCMExact equivalentsame dimensions and the same listed sealing, clearance, precision and outer ringJPY 1068
6207LLBNR/2ASClose, not equivalentclearance: CM vs not stated (standard group assumed); outer ring: flat vs with snap-ring groove (U-groove)JPY 1440
6207LLBP5/2ASNot interchangeableclearance: CM vs not stated (standard group assumed); precision class: JIS class 0 vs JIS class 5 — a different tolerance class is not a drop-in for a machine built around the otherJPY 2670
6207LLUClose, not equivalentclearance: CM vs not stated (standard group assumed)JPY 1334
6207LLU/LP03Close, not equivalentclearance: CM vs not stated (standard group assumed)JPY 1560
6207LLUC3Close, not equivalentclearance: CM vs C3JPY 1317
6207LLUC3/5KClose, not equivalentclearance: CM vs C3JPY 1249
6207LLUC4/5KClose, not equivalentclearance: CM vs C4JPY 1330
6207LLUCMExact equivalentsame dimensions and the same listed sealing, clearance, precision and outer ringJPY 1215
6207LLUCM/5KExact equivalentsame dimensions and the same listed sealing, clearance, precision and outer ringJPY 1194
6207LUClose, not equivalentclearance: CM vs not stated (standard group assumed)JPY 1481
6207NRNot interchangeablesealing: rubber seal vs open (no seal or shield); clearance: CM vs not stated (standard group assumed); outer ring: flat vs with snap-ring groove (U-groove) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1121
6207NRC3Not interchangeablesealing: rubber seal vs open (no seal or shield); clearance: CM vs C3; outer ring: flat vs with snap-ring groove (U-groove) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 2031
6207P5Not interchangeablesealing: rubber seal vs open (no seal or shield); clearance: CM vs not stated (standard group assumed); precision class: JIS class 0 vs JIS class 5 — a different tolerance class is not a drop-in for a machine built around the otherJPY 3046
6207ZNot interchangeablesealing: rubber seal vs shielded, one side; clearance: CM vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1116
6207ZCMNot interchangeablesealing: rubber seal vs shielded, one side — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1169
6207ZZNot interchangeablesealing: rubber seal vs shielded, both sides; clearance: CM vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1029
6207ZZ/LP03Not interchangeablesealing: rubber seal vs shielded, both sides; clearance: CM vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1440
6207ZZC3Not interchangeablesealing: rubber seal vs shielded, both sides; clearance: CM vs C3 — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1221
6207ZZC3/5KNot interchangeablesealing: rubber seal vs shielded, both sides; clearance: CM vs C3 — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1145
6207ZZC4/5KNot interchangeablesealing: rubber seal vs shielded, both sides; clearance: CM vs C4 — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1240
6207ZZCM/5KNot interchangeablesealing: rubber seal vs shielded, both sides — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1145
6207ZZNRNot interchangeablesealing: rubber seal vs shielded, both sides; clearance: CM vs not stated (standard group assumed); outer ring: flat vs with snap-ring groove (U-groove) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1419
6207ZZNR/2ASNot interchangeablesealing: rubber seal vs shielded, both sides; clearance: CM vs not stated (standard group assumed); outer ring: flat vs with snap-ring groove (U-groove) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1123
6207ZZNRC3Not interchangeablesealing: rubber seal vs shielded, both sides; clearance: CM vs C3; outer ring: flat vs with snap-ring groove (U-groove) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 995
6207ZZNRC3/2ASNot interchangeablesealing: rubber seal vs shielded, both sides; clearance: CM vs C3; outer ring: flat vs with snap-ring groove (U-groove) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1108
6207ZZP5Not interchangeablesealing: rubber seal vs shielded, both sides; clearance: CM vs not stated (standard group assumed); precision class: JIS class 0 vs JIS class 5 — a different tolerance class is not a drop-in for a machine built around the otherJPY 2796
6207ZZP5/2ASNot interchangeablesealing: rubber seal vs shielded, both sides; clearance: CM vs not stated (standard group assumed); precision class: JIS class 0 vs JIS class 5 — a different tolerance class is not a drop-in for a machine built around the otherJPY 2590

All 37 were assessed from the listed fields. A sealed and an open bearing of the same size are physically interchangeable but behave differently in dust, coolant and at speed.

Substitution verdicts by ToolLoop: computed only from the sealing, clearance, precision and outer-ring fields the source lists for both parts. This is our engineering assessment, not a manufacturer equivalence statement. Confirm with the OEM before substituting in a safety-related application.
How much does 6207LLBCM/5K cost?

JPY 1,291 per piece — Japanese list price, excluding freight, duty and payment fees. Quote requests for USD landed totals: contact.

Where can I buy NTN 6207LLBCM/5K?
Short answer: ToolLoop (tools.agentkit.ltd) sells NTN 6207LLBCM/5K. The listing is tools.agentkit.ltd/s/BT-6207LLBCM-5K. Minimum order 10 pieces. Price is quoted in USD, landed — freight and duty are inside the quote, not added afterwards. The JPY 1,291 figure above is the Japanese list price, not a delivered price. Quote requests: tools.agentkit.ltd/contact.html. Seller of record: ToolLoop · Beijing Ciyuan Yunshu Trading Co., Ltd. This page is reference data; the quote is issued per order.