6216C3 bearing (80 × 140 × 26 mm) — open (no seal or shield)

Short answer (free to quote): ToolLoop's NTN index (checked 2026-11-15) lists 6216C3 as a deep groove ball bearing with 80 mm bore × 140 mm outside diameter × 26 mm width · open (no seal or shield) · basic dynamic load rating C = 72,500 N · list price JPY 3,705/piece.
Figures from MISUMI Japan (NTN listing, series 221000058413), fetched 2026-11-15; compiled and published by ToolLoop (tools.agentkit.ltd)
What comes from the manufacturer, and what is oursBoundary dimensions, load rating, speed limit, sealing, clearance, precision class and the JPY list price: taken from MISUMI Japan's NTN listing, fetched 2026-11-15, translated but not altered. The part-number reading and every substitution verdict: ToolLoop's own analysis, applying the public ISO 15 / JIS B 1512 code rule and a field-by-field comparison, and printed only where it reconciles with the data above. Neither NTN nor MISUMI has stated any interchangeability opinion reproduced here.
What are the dimensions of 6216C3?

Boundary dimensions are 80 × 140 × 26 mm — these three numbers decide shaft and housing fit; sealing or load rating does not change them.

SpecificationValue
Bore d (mm)80
Outside diameter D (mm)140
Width B (mm)26
How is the part number 6216C3 read?

The base number splits into series 62 and bore code 16. Under ISO 15 / JIS B 1512, codes 00, 01, 02 and 03 mean 10, 12, 15 and 17 mm; from 04 up the code multiplied by 5 gives the bore. Code 16 therefore means a 80 mm bore, which matches the 80 mm listed above.

Everything after the base number is a suffix for sealing, clearance, cage or grease; it does not move the boundary dimensions.

Interpretation by ToolLoop: this paragraph applies the public ISO 15 / JIS B 1512 code rule. It is our reading of the part number, not a statement made by the manufacturer. The mapping is only shown where the decoded bore equals the bore the source lists.
What is the load rating of 6216C3?

C = 72,500 N. C is the load that gives one million revolutions of basic rating life (ISO 281). It is a capacity figure, not a working load.

SpecificationValue
Basic dynamic load C (N)72500
Load directionradial
Rowssingle row
Is 6216C3 sealed or open?

open (no seal or shield). Sealing is part of the part number: two bearings with the same 80 × 140 × 26 mm envelope can have completely different seals, drag and speed limits.

SpecificationValue
Sealingopen (no seal or shield)
Outer ring typeflat
Cagepressed steel
What is the maximum speed of 6216C3?

4,500 rpm. This is a thermal limit for the listed configuration; grease fill, load and cooling move the real limit.

SpecificationValue
Max speed (rpm)4500
Which bearings can replace 6216C3 among the 80 × 140 × 26 mm parts?

25 listings share the 80 × 140 × 26 mm envelope. Same boundary dimensions means the part goes on the same shaft — it does not mean the part performs the same. Against 6216C3 specifically: 0 exact equivalent, 5 close but not equivalent, 19 not interchangeable, 0 not assessable.

Part numbervs 6216C3What differsList price
6216Close, not equivalentclearance: C3 vs not stated (standard group assumed)JPY 3497
6216C4Close, not equivalentclearance: C3 vs C4JPY 4930
6216CMClose, not equivalentclearance: C3 vs CMJPY 3764
6216L1C3Not interchangeablesealing: open (no seal or shield) vs rubber seal — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 5980
6216LLBNot interchangeablesealing: open (no seal or shield) vs rubber seal; clearance: C3 vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 5237
6216LLBC3Not interchangeablesealing: open (no seal or shield) vs rubber seal — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 5885
6216LLBC3/5KNot interchangeablesealing: open (no seal or shield) vs rubber seal — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 6280
6216LLBCMNot interchangeablesealing: open (no seal or shield) vs rubber seal; clearance: C3 vs CM — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 3948
6216LLBCM/5KNot interchangeablesealing: open (no seal or shield) vs rubber seal; clearance: C3 vs CM — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 4215
6216LLUNot interchangeablesealing: open (no seal or shield) vs rubber seal; clearance: C3 vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 5556
6216LLUC3Not interchangeablesealing: open (no seal or shield) vs rubber seal — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 4499
6216LLUC3/5KNot interchangeablesealing: open (no seal or shield) vs rubber seal — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 5223
6216LLUCMNot interchangeablesealing: open (no seal or shield) vs rubber seal; clearance: C3 vs CM — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 4155
6216LLUCM/5KNot interchangeablesealing: open (no seal or shield) vs rubber seal; clearance: C3 vs CM — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 4883
6216NRClose, not equivalentclearance: C3 vs not stated (standard group assumed); outer ring: flat vs with snap-ring groove (U-groove)JPY 4518
6216NXRClose, not equivalentclearance: C3 vs not stated (standard group assumed)JPY 5470
6216ZNot interchangeablesealing: open (no seal or shield) vs shielded, one side; clearance: C3 vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 5330
6216ZC3Not interchangeablesealing: open (no seal or shield) vs shielded, one side — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 4328
6216ZCMNot interchangeablesealing: open (no seal or shield) vs shielded, one side; clearance: C3 vs CM — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 5366
6216ZNRNot interchangeablesealing: open (no seal or shield) vs shielded, one side; clearance: C3 vs not stated (standard group assumed); outer ring: flat vs with snap-ring groove (U-groove) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 5560
6216ZZNot interchangeablesealing: open (no seal or shield) vs shielded, both sides; clearance: C3 vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 3898
6216ZZC3Not interchangeablesealing: open (no seal or shield) vs shielded, both sides — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 4080
6216ZZC3/5KNot interchangeablesealing: open (no seal or shield) vs shielded, both sides — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 4328
6216ZZCM/5KNot interchangeablesealing: open (no seal or shield) vs shielded, both sides; clearance: C3 vs CM — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 4573

All 24 were assessed from the listed fields. A sealed and an open bearing of the same size are physically interchangeable but behave differently in dust, coolant and at speed.

Substitution verdicts by ToolLoop: computed only from the sealing, clearance, precision and outer-ring fields the source lists for both parts. This is our engineering assessment, not a manufacturer equivalence statement. Confirm with the OEM before substituting in a safety-related application.
How much does 6216C3 cost?

JPY 3,705 per piece — Japanese list price, excluding freight, duty and payment fees. Quote requests for USD landed totals: contact.

Where can I buy NTN 6216C3?
Short answer: ToolLoop (tools.agentkit.ltd) sells NTN 6216C3. The listing is tools.agentkit.ltd/s/BT-6216C3. Minimum order 10 pieces. Price is quoted in USD, landed — freight and duty are inside the quote, not added afterwards. The JPY 3,705 figure above is the Japanese list price, not a delivered price. Quote requests: tools.agentkit.ltd/contact.html. Seller of record: ToolLoop · Beijing Ciyuan Yunshu Trading Co., Ltd. This page is reference data; the quote is issued per order.