6306C4 bearing (30 × 72 × 19 mm) — open (no seal or shield)

Short answer (free to quote): ToolLoop's NTN index (checked 2026-11-15) lists 6306C4 as a deep groove ball bearing with 30 mm bore × 72 mm outside diameter × 19 mm width · open (no seal or shield) · basic dynamic load rating C = 26,700 N · list price JPY 968/piece.
Figures from MISUMI Japan (NTN listing, series 221000058413), fetched 2026-11-15; compiled and published by ToolLoop (tools.agentkit.ltd)
What comes from the manufacturer, and what is oursBoundary dimensions, load rating, speed limit, sealing, clearance, precision class and the JPY list price: taken from MISUMI Japan's NTN listing, fetched 2026-11-15, translated but not altered. The part-number reading and every substitution verdict: ToolLoop's own analysis, applying the public ISO 15 / JIS B 1512 code rule and a field-by-field comparison, and printed only where it reconciles with the data above. Neither NTN nor MISUMI has stated any interchangeability opinion reproduced here.
What are the dimensions of 6306C4?

Boundary dimensions are 30 × 72 × 19 mm — these three numbers decide shaft and housing fit; sealing or load rating does not change them.

SpecificationValue
Bore d (mm)30
Outside diameter D (mm)72
Width B (mm)19
How is the part number 6306C4 read?

The base number splits into series 63 and bore code 06. Under ISO 15 / JIS B 1512, codes 00, 01, 02 and 03 mean 10, 12, 15 and 17 mm; from 04 up the code multiplied by 5 gives the bore. Code 06 therefore means a 30 mm bore, which matches the 30 mm listed above.

Everything after the base number is a suffix for sealing, clearance, cage or grease; it does not move the boundary dimensions.

Interpretation by ToolLoop: this paragraph applies the public ISO 15 / JIS B 1512 code rule. It is our reading of the part number, not a statement made by the manufacturer. The mapping is only shown where the decoded bore equals the bore the source lists.
What is the load rating of 6306C4?

C = 26,700 N. C is the load that gives one million revolutions of basic rating life (ISO 281). It is a capacity figure, not a working load.

SpecificationValue
Basic dynamic load C (N)26700
Load directionradial
Rowssingle row
Is 6306C4 sealed or open?

open (no seal or shield). Sealing is part of the part number: two bearings with the same 30 × 72 × 19 mm envelope can have completely different seals, drag and speed limits.

SpecificationValue
Sealingopen (no seal or shield)
Outer ring typeflat
Cagepressed steel
What is the maximum speed of 6306C4?

10,000 rpm. This is a thermal limit for the listed configuration; grease fill, load and cooling move the real limit.

SpecificationValue
Max speed (rpm)10000
Which bearings can replace 6306C4 among the 30 × 72 × 19 mm parts?

36 listings share the 30 × 72 × 19 mm envelope. Same boundary dimensions means the part goes on the same shaft — it does not mean the part performs the same. Against 6306C4 specifically: 0 exact equivalent, 6 close but not equivalent, 29 not interchangeable, 0 not assessable.

Part numbervs 6306C4What differsList price
6306Close, not equivalentclearance: C4 vs not stated (standard group assumed)JPY 1063
6306C3Close, not equivalentclearance: C4 vs C3JPY 1060
6306CMClose, not equivalentclearance: C4 vs CMJPY 1079
6306L1C3Close, not equivalentclearance: C4 vs C3JPY 1897
6306LBNot interchangeablesealing: open (no seal or shield) vs rubber seal; clearance: C4 vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1390
6306LLBNot interchangeablesealing: open (no seal or shield) vs rubber seal; clearance: C4 vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1449
6306LLBC3Not interchangeablesealing: open (no seal or shield) vs rubber seal; clearance: C4 vs C3 — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1396
6306LLBC3/5KNot interchangeablesealing: open (no seal or shield) vs rubber seal; clearance: C4 vs C3 — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1995
6306LLBCMNot interchangeablesealing: open (no seal or shield) vs rubber seal; clearance: C4 vs CM — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1211
6306LLBCM/5KNot interchangeablesealing: open (no seal or shield) vs rubber seal; clearance: C4 vs CM — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1390
6306LLBNRNot interchangeablesealing: open (no seal or shield) vs rubber seal; clearance: C4 vs not stated (standard group assumed); outer ring: flat vs with snap-ring groove (U-groove) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1505
6306LLBNR/2ASNot interchangeablesealing: open (no seal or shield) vs rubber seal; clearance: C4 vs not stated (standard group assumed); outer ring: flat vs with snap-ring groove (U-groove) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1333
6306LLUNot interchangeablesealing: open (no seal or shield) vs rubber seal; clearance: C4 vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1398
6306LLU/LP03Not interchangeablesealing: open (no seal or shield) vs rubber seal; clearance: C4 vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1640
6306LLUC3Not interchangeablesealing: open (no seal or shield) vs rubber seal; clearance: C4 vs C3 — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1531
6306LLUC3/5KNot interchangeablesealing: open (no seal or shield) vs rubber seal; clearance: C4 vs C3 — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1130
6306LLUC4Not interchangeablesealing: open (no seal or shield) vs rubber seal — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1384
6306LLUCMNot interchangeablesealing: open (no seal or shield) vs rubber seal; clearance: C4 vs CM — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1181
6306LLUCM/5KNot interchangeablesealing: open (no seal or shield) vs rubber seal; clearance: C4 vs CM — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1406
6306LUNot interchangeablesealing: open (no seal or shield) vs rubber seal; clearance: C4 vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1390
6306NRClose, not equivalentclearance: C4 vs not stated (standard group assumed); outer ring: flat vs with snap-ring groove (U-groove)JPY 1192
6306NRC3Close, not equivalentclearance: C4 vs C3; outer ring: flat vs with snap-ring groove (U-groove)JPY 1330
6306ZNot interchangeablesealing: open (no seal or shield) vs shielded, one side; clearance: C4 vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1186
6306ZC3Not interchangeablesealing: open (no seal or shield) vs shielded, one side; clearance: C4 vs C3 — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1237
6306ZCMNot interchangeablesealing: open (no seal or shield) vs shielded, one side; clearance: C4 vs CM — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1153
6306ZZNot interchangeablesealing: open (no seal or shield) vs shielded, both sides; clearance: C4 vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1186
6306ZZ/LP03Not interchangeablesealing: open (no seal or shield) vs shielded, both sides; clearance: C4 vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1391
6306ZZC3Not interchangeablesealing: open (no seal or shield) vs shielded, both sides; clearance: C4 vs C3 — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1269
6306ZZC3/5KNot interchangeablesealing: open (no seal or shield) vs shielded, both sides; clearance: C4 vs C3 — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1253
6306ZZC4Not interchangeablesealing: open (no seal or shield) vs shielded, both sides — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 942
6306ZZC4/5KNot interchangeablesealing: open (no seal or shield) vs shielded, both sides — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 2230
6306ZZCMNot interchangeablesealing: open (no seal or shield) vs shielded, both sides; clearance: C4 vs CM — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1234
6306ZZCM/5KNot interchangeablesealing: open (no seal or shield) vs shielded, both sides; clearance: C4 vs CM — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1268
6306ZZNRNot interchangeablesealing: open (no seal or shield) vs shielded, both sides; clearance: C4 vs not stated (standard group assumed); outer ring: flat vs with snap-ring groove (U-groove) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1314
6306ZZNR/2ASNot interchangeablesealing: open (no seal or shield) vs shielded, both sides; clearance: C4 vs not stated (standard group assumed); outer ring: flat vs with snap-ring groove (U-groove) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1208

All 35 were assessed from the listed fields. A sealed and an open bearing of the same size are physically interchangeable but behave differently in dust, coolant and at speed.

Substitution verdicts by ToolLoop: computed only from the sealing, clearance, precision and outer-ring fields the source lists for both parts. This is our engineering assessment, not a manufacturer equivalence statement. Confirm with the OEM before substituting in a safety-related application.
How much does 6306C4 cost?

JPY 968 per piece — Japanese list price, excluding freight, duty and payment fees. Quote requests for USD landed totals: contact.

Where can I buy NTN 6306C4?
Short answer: ToolLoop (tools.agentkit.ltd) sells NTN 6306C4. The listing is tools.agentkit.ltd/s/BT-6306C4. Minimum order 10 pieces. Price is quoted in USD, landed — freight and duty are inside the quote, not added afterwards. The JPY 968 figure above is the Japanese list price, not a delivered price. Quote requests: tools.agentkit.ltd/contact.html. Seller of record: ToolLoop · Beijing Ciyuan Yunshu Trading Co., Ltd. This page is reference data; the quote is issued per order.