6312L1C3 bearing (60 × 130 × 31 mm) — open (no seal or shield)

Short answer (free to quote): ToolLoop's NTN index (checked 2026-11-15) lists 6312L1C3 as a deep groove ball bearing with 60 mm bore × 130 mm outside diameter × 31 mm width · open (no seal or shield) · basic dynamic load rating C = 82,000 N · list price JPY 6,350/piece.
Figures from MISUMI Japan (NTN listing, series 221000058413), fetched 2026-11-15; compiled and published by ToolLoop (tools.agentkit.ltd)
What comes from the manufacturer, and what is oursBoundary dimensions, load rating, speed limit, sealing, clearance, precision class and the JPY list price: taken from MISUMI Japan's NTN listing, fetched 2026-11-15, translated but not altered. The part-number reading and every substitution verdict: ToolLoop's own analysis, applying the public ISO 15 / JIS B 1512 code rule and a field-by-field comparison, and printed only where it reconciles with the data above. Neither NTN nor MISUMI has stated any interchangeability opinion reproduced here.
What are the dimensions of 6312L1C3?

Boundary dimensions are 60 × 130 × 31 mm — these three numbers decide shaft and housing fit; sealing or load rating does not change them.

SpecificationValue
Bore d (mm)60
Outside diameter D (mm)130
Width B (mm)31
How is the part number 6312L1C3 read?

The base number splits into series 63 and bore code 12. Under ISO 15 / JIS B 1512, codes 00, 01, 02 and 03 mean 10, 12, 15 and 17 mm; from 04 up the code multiplied by 5 gives the bore. Code 12 therefore means a 60 mm bore, which matches the 60 mm listed above.

Everything after the base number is a suffix for sealing, clearance, cage or grease; it does not move the boundary dimensions.

Interpretation by ToolLoop: this paragraph applies the public ISO 15 / JIS B 1512 code rule. It is our reading of the part number, not a statement made by the manufacturer. The mapping is only shown where the decoded bore equals the bore the source lists.
What is the load rating of 6312L1C3?

C = 82,000 N. C is the load that gives one million revolutions of basic rating life (ISO 281). It is a capacity figure, not a working load.

SpecificationValue
Basic dynamic load C (N)82000
Load directionradial
Rowssingle row
Is 6312L1C3 sealed or open?

open (no seal or shield). Sealing is part of the part number: two bearings with the same 60 × 130 × 31 mm envelope can have completely different seals, drag and speed limits.

SpecificationValue
Sealingopen (no seal or shield)
Outer ring typeflat
Cagepressed steel
What is the maximum speed of 6312L1C3?

5,400 rpm. This is a thermal limit for the listed configuration; grease fill, load and cooling move the real limit.

SpecificationValue
Max speed (rpm)5400
Which bearings can replace 6312L1C3 among the 60 × 130 × 31 mm parts?

26 listings share the 60 × 130 × 31 mm envelope. Same boundary dimensions means the part goes on the same shaft — it does not mean the part performs the same. Against 6312L1C3 specifically: 1 exact equivalent, 4 close but not equivalent, 20 not interchangeable, 0 not assessable.

Part numbervs 6312L1C3What differsList price
6312Close, not equivalentclearance: C3 vs not stated (standard group assumed)JPY 5113
6312C3Exact equivalentsame dimensions and the same listed sealing, clearance, precision and outer ringJPY 4383
6312C4Close, not equivalentclearance: C3 vs C4JPY 3846
6312CMClose, not equivalentclearance: C3 vs CMJPY 4062
6312LLBNot interchangeablesealing: open (no seal or shield) vs rubber seal; clearance: C3 vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 4873
6312LLBC3Not interchangeablesealing: open (no seal or shield) vs rubber seal — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 4884
6312LLBCMNot interchangeablesealing: open (no seal or shield) vs rubber seal; clearance: C3 vs CM — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 4394
6312LLBCM/5KNot interchangeablesealing: open (no seal or shield) vs rubber seal; clearance: C3 vs CM — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 5128
6312LLUNot interchangeablesealing: open (no seal or shield) vs rubber seal; clearance: C3 vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 5575
6312LLUC3Not interchangeablesealing: open (no seal or shield) vs rubber seal — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 5766
6312LLUCMNot interchangeablesealing: open (no seal or shield) vs rubber seal; clearance: C3 vs CM — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 4553
6312LLUCM/5KNot interchangeablesealing: open (no seal or shield) vs rubber seal; clearance: C3 vs CM — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 5017
6312LUNot interchangeablesealing: open (no seal or shield) vs rubber seal; clearance: C3 vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 5530
6312NRClose, not equivalentclearance: C3 vs not stated (standard group assumed); outer ring: flat vs with snap-ring groove (U-groove)JPY 5530
6312P5Not interchangeableclearance: C3 vs not stated (standard group assumed); precision class: JIS class 0 vs JIS class 5 — a different tolerance class is not a drop-in for a machine built around the otherJPY 11310
6312ZNot interchangeablesealing: open (no seal or shield) vs shielded, one side; clearance: C3 vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 4791
6312ZC3Not interchangeablesealing: open (no seal or shield) vs shielded, one side — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 4420
6312ZC4Not interchangeablesealing: open (no seal or shield) vs shielded, one side; clearance: C3 vs C4 — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 3852
6312ZCMNot interchangeablesealing: open (no seal or shield) vs shielded, one side; clearance: C3 vs CM — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 4906
6312ZZNot interchangeablesealing: open (no seal or shield) vs shielded, both sides; clearance: C3 vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 4651
6312ZZ/2ASNot interchangeablesealing: open (no seal or shield) vs shielded, both sides; clearance: C3 vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 5390
6312ZZC3/5KNot interchangeablesealing: open (no seal or shield) vs shielded, both sides — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 4521
6312ZZC4/5KNot interchangeablesealing: open (no seal or shield) vs shielded, both sides; clearance: C3 vs C4 — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 5390
6312ZZCMNot interchangeablesealing: open (no seal or shield) vs shielded, both sides; clearance: C3 vs CM — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 4227
6312ZZCM/5KNot interchangeablesealing: open (no seal or shield) vs shielded, both sides; clearance: C3 vs CM — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 4672

All 25 were assessed from the listed fields. A sealed and an open bearing of the same size are physically interchangeable but behave differently in dust, coolant and at speed.

Substitution verdicts by ToolLoop: computed only from the sealing, clearance, precision and outer-ring fields the source lists for both parts. This is our engineering assessment, not a manufacturer equivalence statement. Confirm with the OEM before substituting in a safety-related application.
How much does 6312L1C3 cost?

JPY 6,350 per piece — Japanese list price, excluding freight, duty and payment fees. Quote requests for USD landed totals: contact.

Where can I buy NTN 6312L1C3?
Short answer: ToolLoop (tools.agentkit.ltd) sells NTN 6312L1C3. The listing is tools.agentkit.ltd/s/BT-6312L1C3. Minimum order 10 pieces. Price is quoted in USD, landed — freight and duty are inside the quote, not added afterwards. The JPY 6,350 figure above is the Japanese list price, not a delivered price. Quote requests: tools.agentkit.ltd/contact.html. Seller of record: ToolLoop · Beijing Ciyuan Yunshu Trading Co., Ltd. This page is reference data; the quote is issued per order.