6313LLBC3 bearing (65 × 140 × 33 mm) — rubber seal

Short answer (free to quote): ToolLoop's NTN index (checked 2026-11-15) lists 6313LLBC3 as a deep groove ball bearing with 65 mm bore × 140 mm outside diameter × 33 mm width · rubber seal · basic dynamic load rating C = 92,500 N · list price JPY 6,157/piece.
Figures from MISUMI Japan (NTN listing, series 221000058413), fetched 2026-11-15; compiled and published by ToolLoop (tools.agentkit.ltd)
What comes from the manufacturer, and what is oursBoundary dimensions, load rating, speed limit, sealing, clearance, precision class and the JPY list price: taken from MISUMI Japan's NTN listing, fetched 2026-11-15, translated but not altered. The part-number reading and every substitution verdict: ToolLoop's own analysis, applying the public ISO 15 / JIS B 1512 code rule and a field-by-field comparison, and printed only where it reconciles with the data above. Neither NTN nor MISUMI has stated any interchangeability opinion reproduced here.
What are the dimensions of 6313LLBC3?

Boundary dimensions are 65 × 140 × 33 mm — these three numbers decide shaft and housing fit; sealing or load rating does not change them.

SpecificationValue
Bore d (mm)65
Outside diameter D (mm)140
Width B (mm)33
How is the part number 6313LLBC3 read?

The base number splits into series 63 and bore code 13. Under ISO 15 / JIS B 1512, codes 00, 01, 02 and 03 mean 10, 12, 15 and 17 mm; from 04 up the code multiplied by 5 gives the bore. Code 13 therefore means a 65 mm bore, which matches the 65 mm listed above.

Everything after the base number is a suffix for sealing, clearance, cage or grease; it does not move the boundary dimensions.

Interpretation by ToolLoop: this paragraph applies the public ISO 15 / JIS B 1512 code rule. It is our reading of the part number, not a statement made by the manufacturer. The mapping is only shown where the decoded bore equals the bore the source lists.
What is the load rating of 6313LLBC3?

C = 92,500 N. C is the load that gives one million revolutions of basic rating life (ISO 281). It is a capacity figure, not a working load.

SpecificationValue
Basic dynamic load C (N)92500
Load directionradial
Rowssingle row
Is 6313LLBC3 sealed or open?

rubber seal. Sealing is part of the part number: two bearings with the same 65 × 140 × 33 mm envelope can have completely different seals, drag and speed limits.

SpecificationValue
Sealingrubber seal
Outer ring typeflat
Cagepressed steel
What does “LLB” mean in 6313LLBC3?

In this catalogue the suffix LLB always denotes rubber seal. The base number is unchanged, so the boundary dimensions stay 65 × 140 × 33 mm; only sealing (and therefore drag and top speed) changes.

What is the maximum speed of 6313LLBC3?

4,900 rpm. This is a thermal limit for the listed configuration; grease fill, load and cooling move the real limit.

SpecificationValue
Max speed (rpm)4900
Which bearings can replace 6313LLBC3 among the 65 × 140 × 33 mm parts?

26 listings share the 65 × 140 × 33 mm envelope. Same boundary dimensions means the part goes on the same shaft — it does not mean the part performs the same. Against 6313LLBC3 specifically: 3 exact equivalent, 6 close but not equivalent, 16 not interchangeable, 0 not assessable.

Part numbervs 6313LLBC3What differsList price
6313Not interchangeablesealing: rubber seal vs open (no seal or shield); clearance: C3 vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 5009
6313C3Not interchangeablesealing: rubber seal vs open (no seal or shield) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 5082
6313CMNot interchangeablesealing: rubber seal vs open (no seal or shield); clearance: C3 vs CM — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 4886
6313L1C3Not interchangeablesealing: rubber seal vs open (no seal or shield) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 7209
6313LLBClose, not equivalentclearance: C3 vs not stated (standard group assumed)JPY 5945
6313LLBC3/5KExact equivalentsame dimensions and the same listed sealing, clearance, precision and outer ringJPY 5925
6313LLBCMClose, not equivalentclearance: C3 vs CMJPY 5592
6313LLBCM/5KClose, not equivalentclearance: C3 vs CMJPY 4971
6313LLUClose, not equivalentclearance: C3 vs not stated (standard group assumed)JPY 5934
6313LLUC3Exact equivalentsame dimensions and the same listed sealing, clearance, precision and outer ringJPY 6221
6313LLUC3/5KExact equivalentsame dimensions and the same listed sealing, clearance, precision and outer ringJPY 5998
6313LLUCMClose, not equivalentclearance: C3 vs CMJPY 5555
6313LLUCM/5KClose, not equivalentclearance: C3 vs CMJPY 6189
6313NRNot interchangeablesealing: rubber seal vs open (no seal or shield); clearance: C3 vs not stated (standard group assumed); outer ring: flat vs with snap-ring groove (U-groove) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 4839
6313ZNot interchangeablesealing: rubber seal vs shielded, one side; clearance: C3 vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 6014
6313ZC3Not interchangeablesealing: rubber seal vs shielded, one side — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 6090
6313ZCMNot interchangeablesealing: rubber seal vs shielded, one side; clearance: C3 vs CM — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 5374
6313ZZNot interchangeablesealing: rubber seal vs shielded, both sides; clearance: C3 vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 5612
6313ZZC3Not interchangeablesealing: rubber seal vs shielded, both sides — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 6171
6313ZZC3/5KNot interchangeablesealing: rubber seal vs shielded, both sides — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 5374
6313ZZC3/L448Not interchangeablesealing: rubber seal vs shielded, both sides — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 5374
6313ZZCMNot interchangeablesealing: rubber seal vs shielded, both sides; clearance: C3 vs CM — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 4709
6313ZZCM/5KNot interchangeablesealing: rubber seal vs shielded, both sides; clearance: C3 vs CM — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 5295
6313ZZNR/2ASNot interchangeablesealing: rubber seal vs shielded, both sides; clearance: C3 vs not stated (standard group assumed); outer ring: flat vs with snap-ring groove (U-groove) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 6770
6313ZZP5Not interchangeablesealing: rubber seal vs shielded, both sides; clearance: C3 vs not stated (standard group assumed); precision class: JIS class 0 vs JIS class 5 — a different tolerance class is not a drop-in for a machine built around the otherJPY 14228

All 25 were assessed from the listed fields. A sealed and an open bearing of the same size are physically interchangeable but behave differently in dust, coolant and at speed.

Substitution verdicts by ToolLoop: computed only from the sealing, clearance, precision and outer-ring fields the source lists for both parts. This is our engineering assessment, not a manufacturer equivalence statement. Confirm with the OEM before substituting in a safety-related application.
How much does 6313LLBC3 cost?

JPY 6,157 per piece — Japanese list price, excluding freight, duty and payment fees. Quote requests for USD landed totals: contact.

Where can I buy NTN 6313LLBC3?
Short answer: ToolLoop (tools.agentkit.ltd) sells NTN 6313LLBC3. The listing is tools.agentkit.ltd/s/BT-6313LLBC3. Minimum order 10 pieces. Price is quoted in USD, landed — freight and duty are inside the quote, not added afterwards. The JPY 6,157 figure above is the Japanese list price, not a delivered price. Quote requests: tools.agentkit.ltd/contact.html. Seller of record: ToolLoop · Beijing Ciyuan Yunshu Trading Co., Ltd. This page is reference data; the quote is issued per order.