6807LLBCM bearing (35 × 47 × 7 mm) — rubber seal

Short answer (free to quote): ToolLoop's NTN index (checked 2026-11-15) lists 6807LLBCM as a deep groove ball bearing with 35 mm bore × 47 mm outside diameter × 7 mm width · rubber seal · basic dynamic load rating C = 4,900 N · list price JPY 1,230/piece.
Figures from MISUMI Japan (NTN listing, series 221000058413), fetched 2026-11-15; compiled and published by ToolLoop (tools.agentkit.ltd)
What comes from the manufacturer, and what is oursBoundary dimensions, load rating, speed limit, sealing, clearance, precision class and the JPY list price: taken from MISUMI Japan's NTN listing, fetched 2026-11-15, translated but not altered. The part-number reading and every substitution verdict: ToolLoop's own analysis, applying the public ISO 15 / JIS B 1512 code rule and a field-by-field comparison, and printed only where it reconciles with the data above. Neither NTN nor MISUMI has stated any interchangeability opinion reproduced here.
What are the dimensions of 6807LLBCM?

Boundary dimensions are 35 × 47 × 7 mm — these three numbers decide shaft and housing fit; sealing or load rating does not change them.

SpecificationValue
Bore d (mm)35
Outside diameter D (mm)47
Width B (mm)7
How is the part number 6807LLBCM read?

The base number splits into series 68 and bore code 07. Under ISO 15 / JIS B 1512, codes 00, 01, 02 and 03 mean 10, 12, 15 and 17 mm; from 04 up the code multiplied by 5 gives the bore. Code 07 therefore means a 35 mm bore, which matches the 35 mm listed above.

Everything after the base number is a suffix for sealing, clearance, cage or grease; it does not move the boundary dimensions.

Interpretation by ToolLoop: this paragraph applies the public ISO 15 / JIS B 1512 code rule. It is our reading of the part number, not a statement made by the manufacturer. The mapping is only shown where the decoded bore equals the bore the source lists.
What is the load rating of 6807LLBCM?

C = 4,900 N. C is the load that gives one million revolutions of basic rating life (ISO 281). It is a capacity figure, not a working load.

SpecificationValue
Basic dynamic load C (N)4900
Load directionradial
Rowssingle row
Is 6807LLBCM sealed or open?

rubber seal. Sealing is part of the part number: two bearings with the same 35 × 47 × 7 mm envelope can have completely different seals, drag and speed limits.

SpecificationValue
Sealingrubber seal
Outer ring typeflat
Cagepressed steel
What does “LLB” mean in 6807LLBCM?

In this catalogue the suffix LLB always denotes rubber seal. The base number is unchanged, so the boundary dimensions stay 35 × 47 × 7 mm; only sealing (and therefore drag and top speed) changes.

What is the maximum speed of 6807LLBCM?

13,000 rpm. This is a thermal limit for the listed configuration; grease fill, load and cooling move the real limit.

SpecificationValue
Max speed (rpm)13000
Which bearings can replace 6807LLBCM among the 35 × 47 × 7 mm parts?

22 listings share the 35 × 47 × 7 mm envelope. Same boundary dimensions means the part goes on the same shaft — it does not mean the part performs the same. Against 6807LLBCM specifically: 3 exact equivalent, 9 close but not equivalent, 9 not interchangeable, 0 not assessable.

Part numbervs 6807LLBCMWhat differsList price
6807Not interchangeablesealing: rubber seal vs open (no seal or shield); clearance: CM vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1543
6807JRNot interchangeablesealing: rubber seal vs open (no seal or shield); clearance: CM vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1335
6807JRLLBClose, not equivalentclearance: CM vs not stated (standard group assumed)JPY 1478
6807JRLLBCMExact equivalentsame dimensions and the same listed sealing, clearance, precision and outer ringJPY 1230
6807JRLLBCM/5KExact equivalentsame dimensions and the same listed sealing, clearance, precision and outer ringJPY 1287
6807JRLLUClose, not equivalentclearance: CM vs not stated (standard group assumed)JPY 1936
6807JRLLU/2ASClose, not equivalentclearance: CM vs not stated (standard group assumed)JPY 1418
6807JRLLU/5KClose, not equivalentclearance: CM vs not stated (standard group assumed)JPY 1418
6807JRNRNot interchangeablesealing: rubber seal vs open (no seal or shield); clearance: CM vs not stated (standard group assumed); outer ring: flat vs with snap-ring groove (U-groove) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1500
6807JRZZNot interchangeablesealing: rubber seal vs shielded, both sides; clearance: CM vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1380
6807JRZZNR/2ASNot interchangeablesealing: rubber seal vs shielded, both sides; clearance: CM vs not stated (standard group assumed); outer ring: flat vs with snap-ring groove (U-groove) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1620
6807LLBClose, not equivalentclearance: CM vs not stated (standard group assumed)JPY 1861
6807LLB/2ASClose, not equivalentclearance: CM vs not stated (standard group assumed)JPY 1513
6807LLBCM/5KExact equivalentsame dimensions and the same listed sealing, clearance, precision and outer ringJPY 1230
6807LLUClose, not equivalentclearance: CM vs not stated (standard group assumed)JPY 1828
6807LLU/2ASClose, not equivalentclearance: CM vs not stated (standard group assumed)JPY 1240
6807LLU/5KClose, not equivalentclearance: CM vs not stated (standard group assumed)JPY 1230
6807ZZNot interchangeablesealing: rubber seal vs shielded, both sides; clearance: CM vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1511
6807ZZ/2ASNot interchangeablesealing: rubber seal vs shielded, both sides; clearance: CM vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1283
6807ZZNRNot interchangeablesealing: rubber seal vs shielded, both sides; clearance: CM vs not stated (standard group assumed); outer ring: flat vs with snap-ring groove (U-groove) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1768
6807ZZNR/2ASNot interchangeablesealing: rubber seal vs shielded, both sides; clearance: CM vs not stated (standard group assumed); outer ring: flat vs with snap-ring groove (U-groove) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1270

All 21 were assessed from the listed fields. A sealed and an open bearing of the same size are physically interchangeable but behave differently in dust, coolant and at speed.

Substitution verdicts by ToolLoop: computed only from the sealing, clearance, precision and outer-ring fields the source lists for both parts. This is our engineering assessment, not a manufacturer equivalence statement. Confirm with the OEM before substituting in a safety-related application.
How much does 6807LLBCM cost?

JPY 1,230 per piece — Japanese list price, excluding freight, duty and payment fees. Quote requests for USD landed totals: contact.

Where can I buy NTN 6807LLBCM?
Short answer: ToolLoop (tools.agentkit.ltd) sells NTN 6807LLBCM. The listing is tools.agentkit.ltd/s/BT-6807LLBCM. Minimum order 10 pieces. Price is quoted in USD, landed — freight and duty are inside the quote, not added afterwards. The JPY 1,230 figure above is the Japanese list price, not a delivered price. Quote requests: tools.agentkit.ltd/contact.html. Seller of record: ToolLoop · Beijing Ciyuan Yunshu Trading Co., Ltd. This page is reference data; the quote is issued per order.