Bearings with 12 × 37 × 12 mm boundary dimensions — 24 part numbers

Short answer (free to quote): ToolLoop's NTN index lists 24 part numbers with 12 × 37 × 12 mm boundary dimensions, in 12 distinct configurations (checked 2026-11-15). They fit the same shaft and housing. Part numbers in different groups below are not equivalent.
Figures from MISUMI Japan (NTN listing, series 221000058413), fetched 2026-11-15; grouped and published by ToolLoop (tools.agentkit.ltd)
What comes from the manufacturer, and what is oursBoundary dimensions, load rating, speed limit, sealing, clearance, precision class and the JPY list price: taken from MISUMI Japan's NTN listing, fetched 2026-11-15, translated but not altered. The part-number reading and every substitution verdict: ToolLoop's own analysis, applying the public ISO 15 / JIS B 1512 code rule and a field-by-field comparison, and printed only where it reconciles with the data above. Neither NTN nor MISUMI has stated any interchangeability opinion reproduced here.
What fits a 12 × 37 × 12 mm envelope?
Part numberSealingC (N)List price
rubber seal · clearance not stated · JIS class 0 · outer ring flat — 4 parts
6301LLBrubber seal9700JPY 801
6301LLUrubber seal9700JPY 778
6301LLU/LP03rubber seal9700JPY 1030
6301LUrubber seal9700JPY 910
rubber seal · clearance C3 · JIS class 0 · outer ring flat — 4 parts
6301LLBC3rubber seal9700JPY 815
6301LLBC3/5Krubber seal9700JPY 741
6301LLUC3rubber seal9700JPY 759
6301LLUC3/5Krubber seal9700JPY 692
rubber seal · clearance CM · JIS class 0 · outer ring flat — 4 parts
6301LLBCMrubber seal9700JPY 697
6301LLBCM/5Krubber seal9700JPY 778
6301LLUCMrubber seal9700JPY 756
6301LLUCM/5Krubber seal9700JPY 589
shielded, both sides · clearance C3 · JIS class 0 · outer ring flat — 2 parts
6301ZZC3shielded, both sides9700JPY 714
6301ZZC3/5Kshielded, both sides9700JPY 678
shielded, both sides · clearance CM · JIS class 0 · outer ring flat — 2 parts
6301ZZCMshielded, both sides9700JPY 644
6301ZZCM/5Kshielded, both sides9700JPY 665
shielded, both sides · clearance not stated · JIS class 0 · outer ring with snap-ring groove (U-groove) — 2 parts
6301ZZNRshielded, both sides9700JPY 803
6301ZZNR/2ASshielded, both sides9700JPY 708
open (no seal or shield) · clearance not stated · JIS class 0 · outer ring flat — 1 part
6301open (no seal or shield)9700JPY 630
open (no seal or shield) · clearance C3 · JIS class 0 · outer ring flat — 1 part
6301C3open (no seal or shield)9700JPY 585
open (no seal or shield) · clearance CM · JIS class 0 · outer ring flat — 1 part
6301CMopen (no seal or shield)9700JPY 628
shielded, one side · clearance not stated · JIS class 0 · outer ring flat — 1 part
6301Zshielded, one side9700JPY 518
shielded, one side · clearance CM · JIS class 0 · outer ring flat — 1 part
6301ZCMshielded, one side9700JPY 583
shielded, both sides · clearance not stated · JIS class 0 · outer ring flat — 1 part
6301ZZshielded, both sides9700JPY 473

Same envelope is not the same part. The groups below differ in sealing, clearance, precision class or outer-ring design; a part from one group is not a drop-in for another. Choose by what the machine is exposed to (dust, coolant, heat, speed), not by price alone.

Grouping and advice by ToolLoop: groups are built strictly from the sealing, clearance, precision and outer-ring fields in the source listing. Treating a difference in those fields as a difference in behaviour is our engineering judgement.