Bearings with 130 × 200 × 33 mm boundary dimensions — 7 part numbers

Short answer (free to quote): ToolLoop's NTN index lists 7 part numbers with 130 × 200 × 33 mm boundary dimensions, in 6 distinct configurations (checked 2026-11-15). They fit the same shaft and housing. Part numbers in different groups below are not equivalent.
Figures from MISUMI Japan (NTN listing, series 221000058413), fetched 2026-11-15; grouped and published by ToolLoop (tools.agentkit.ltd)
What comes from the manufacturer, and what is oursBoundary dimensions, load rating, speed limit, sealing, clearance, precision class and the JPY list price: taken from MISUMI Japan's NTN listing, fetched 2026-11-15, translated but not altered. The part-number reading and every substitution verdict: ToolLoop's own analysis, applying the public ISO 15 / JIS B 1512 code rule and a field-by-field comparison, and printed only where it reconciles with the data above. Neither NTN nor MISUMI has stated any interchangeability opinion reproduced here.
What fits a 130 × 200 × 33 mm envelope?
Part numberSealingC (N)List price
rubber seal · clearance not stated · JIS class 0 · outer ring flat — 2 parts
6026LLUrubber seal106000JPY 17914
6026LLU/2ASrubber seal106000JPY 21222
open (no seal or shield) · clearance not stated · JIS class 0 · outer ring flat — 1 part
6026open (no seal or shield)106000JPY 16038
open (no seal or shield) · clearance C3 · JIS class 0 · outer ring flat — 1 part
6026C3open (no seal or shield)106000JPY 14170
open (no seal or shield) · clearance CM · JIS class 0 · outer ring flat — 1 part
6026CMopen (no seal or shield)106000JPY 14170
shielded, one side · clearance CM · JIS class 0 · outer ring flat — 1 part
6026ZCMshielded, one side106000JPY 15942
shielded, both sides · clearance not stated · JIS class 0 · outer ring flat — 1 part
6026ZZshielded, both sides106000JPY 22162

Same envelope is not the same part. The groups below differ in sealing, clearance, precision class or outer-ring design; a part from one group is not a drop-in for another. Choose by what the machine is exposed to (dust, coolant, heat, speed), not by price alone.

Grouping and advice by ToolLoop: groups are built strictly from the sealing, clearance, precision and outer-ring fields in the source listing. Treating a difference in those fields as a difference in behaviour is our engineering judgement.