Bearings with 30 × 42 × 7 mm boundary dimensions — 19 part numbers

Short answer (free to quote): ToolLoop's NTN index lists 19 part numbers with 30 × 42 × 7 mm boundary dimensions, in 7 distinct configurations (checked 2026-11-15). They fit the same shaft and housing. Part numbers in different groups below are not equivalent.
Figures from MISUMI Japan (NTN listing, series 221000058413), fetched 2026-11-15; grouped and published by ToolLoop (tools.agentkit.ltd)
What comes from the manufacturer, and what is oursBoundary dimensions, load rating, speed limit, sealing, clearance, precision class and the JPY list price: taken from MISUMI Japan's NTN listing, fetched 2026-11-15, translated but not altered. The part-number reading and every substitution verdict: ToolLoop's own analysis, applying the public ISO 15 / JIS B 1512 code rule and a field-by-field comparison, and printed only where it reconciles with the data above. Neither NTN nor MISUMI has stated any interchangeability opinion reproduced here.
What fits a 30 × 42 × 7 mm envelope?
Part numberSealingC (N)List price
rubber seal · clearance not stated · JIS class 0 · outer ring flat — 4 parts
6806JRLLBrubber seal4700JPY 1163
6806LLBrubber seal4700JPY 1366
6806LLUrubber seal4700JPY 1351
6806LLU/2ASrubber seal4700JPY 1044
shielded, both sides · clearance not stated · JIS class 0 · outer ring flat — 4 parts
6806JRZZshielded, both sides4700JPY 1181
6806JRZZ/5Kshielded, both sides4700JPY 926
6806ZZshielded, both sides4700JPY 1228
6806ZZ/2ASshielded, both sides4700JPY 1056
shielded, both sides · clearance not stated · JIS class 0 · outer ring with snap-ring groove (U-groove) — 4 parts
6806JRZZNRshielded, both sides4700JPY 1300
6806JRZZNR/2ASshielded, both sides4700JPY 1222
6806ZZNRshielded, both sides4700JPY 1857
6806ZZNR/2ASshielded, both sides4700JPY 1250
shielded, both sides · clearance CM · JIS class 0 · outer ring flat — 3 parts
6806JRZZCMshielded, both sides4700JPY 942
6806JRZZCM/5Kshielded, both sides4700JPY 1059
6806ZZCMshielded, both sides4700JPY 1064
open (no seal or shield) · clearance not stated · JIS class 0 · outer ring flat — 2 parts
6806open (no seal or shield)4700JPY 1005
6806JRopen (no seal or shield)4700JPY 1034
shielded, one side · clearance not stated · JIS class 0 · outer ring flat — 1 part
6806JRZshielded, one side4700JPY 1154
shielded, both sides · clearance C3 · JIS class 0 · outer ring flat — 1 part
6806JRZZC3/5Kshielded, both sides4700JPY 1310

Same envelope is not the same part. The groups below differ in sealing, clearance, precision class or outer-ring design; a part from one group is not a drop-in for another. Choose by what the machine is exposed to (dust, coolant, heat, speed), not by price alone.

Grouping and advice by ToolLoop: groups are built strictly from the sealing, clearance, precision and outer-ring fields in the source listing. Treating a difference in those fields as a difference in behaviour is our engineering judgement.