Bearings with 30 × 55 × 13 mm boundary dimensions — 36 part numbers

Short answer (free to quote): ToolLoop's NTN index lists 36 part numbers with 30 × 55 × 13 mm boundary dimensions, in 17 distinct configurations (checked 2026-11-15). They fit the same shaft and housing. Part numbers in different groups below are not equivalent.
Figures from MISUMI Japan (NTN listing, series 221000058413), fetched 2026-11-15; grouped and published by ToolLoop (tools.agentkit.ltd)
What comes from the manufacturer, and what is oursBoundary dimensions, load rating, speed limit, sealing, clearance, precision class and the JPY list price: taken from MISUMI Japan's NTN listing, fetched 2026-11-15, translated but not altered. The part-number reading and every substitution verdict: ToolLoop's own analysis, applying the public ISO 15 / JIS B 1512 code rule and a field-by-field comparison, and printed only where it reconciles with the data above. Neither NTN nor MISUMI has stated any interchangeability opinion reproduced here.
What fits a 30 × 55 × 13 mm envelope?
Part numberSealingC (N)List price
rubber seal · clearance not stated · JIS class 0 · outer ring flat — 7 parts
6006LBrubber seal13200JPY 913
6006LLBrubber seal13200JPY 916
6006LLB/LP03rubber seal13200JPY 1200
6006LLUrubber seal13200JPY 832
6006LLU/2ASrubber seal13200JPY 1050
6006LLU/LP03rubber seal13200JPY 996
6006LUrubber seal13200JPY 669
rubber seal · clearance CM · JIS class 0 · outer ring flat — 4 parts
6006LLBCMrubber seal13200JPY 890
6006LLBCM/5Krubber seal13200JPY 798
6006LLUCMrubber seal13200JPY 1034
6006LLUCM/5Krubber seal13200JPY 1064
rubber seal · clearance not stated · JIS class 0 · outer ring with snap-ring groove (U-groove) — 4 parts
6006LLBNRrubber seal13200JPY 757
6006LLBNR/2ASrubber seal13200JPY 849
6006LLUNRrubber seal13200JPY 1017
6006LLUNR/2ASrubber seal13200JPY 848
rubber seal · clearance C3 · JIS class 0 · outer ring flat — 3 parts
6006LLBC3rubber seal13200JPY 1034
6006LLBC3/5Krubber seal13200JPY 928
6006LLUC3rubber seal13200JPY 904
shielded, both sides · clearance not stated · JIS class 0 · outer ring flat — 2 parts
6006ZZshielded, both sides13200JPY 728
6006ZZ/LP03shielded, both sides13200JPY 1130
shielded, both sides · clearance C3 · JIS class 0 · outer ring flat — 2 parts
6006ZZC3shielded, both sides13200JPY 829
6006ZZC3/5Kshielded, both sides13200JPY 956
shielded, both sides · clearance C4 · JIS class 0 · outer ring flat — 2 parts
6006ZZC4shielded, both sides13200JPY 846
6006ZZC4/5Kshielded, both sides13200JPY 959
shielded, both sides · clearance CM · JIS class 0 · outer ring flat — 2 parts
6006ZZCMshielded, both sides13200JPY 585
6006ZZCM/5Kshielded, both sides13200JPY 591
shielded, both sides · clearance not stated · JIS class 0 · outer ring with snap-ring groove (U-groove) — 2 parts
6006ZZNRshielded, both sides13200JPY 917
6006ZZNR/2ASshielded, both sides13200JPY 767
open (no seal or shield) · clearance not stated · JIS class 0 · outer ring flat — 1 part
6006open (no seal or shield)13200JPY 854
open (no seal or shield) · clearance CM · JIS class 0 · outer ring flat — 1 part
6006CMopen (no seal or shield)13200JPY 779
open (no seal or shield) · clearance not stated · JIS class 0 · outer ring with snap-ring groove (U-groove) — 1 part
6006NRopen (no seal or shield)13200JPY 820
open (no seal or shield) · clearance not stated · JIS class 5 · outer ring flat — 1 part
6006P5open (no seal or shield)13200JPY 1800
shielded, one side · clearance not stated · JIS class 0 · outer ring flat — 1 part
6006Zshielded, one side13200JPY 664
shielded, one side · clearance C3 · JIS class 0 · outer ring flat — 1 part
6006ZC3shielded, one side13200JPY 601
shielded, one side · clearance CM · JIS class 0 · outer ring flat — 1 part
6006ZCMshielded, one side13200JPY 763
shielded, one side · clearance not stated · JIS class 0 · outer ring with snap-ring groove (U-groove) — 1 part
6006ZNRshielded, one side13200JPY 847

Same envelope is not the same part. The groups below differ in sealing, clearance, precision class or outer-ring design; a part from one group is not a drop-in for another. Choose by what the machine is exposed to (dust, coolant, heat, speed), not by price alone.

Grouping and advice by ToolLoop: groups are built strictly from the sealing, clearance, precision and outer-ring fields in the source listing. Treating a difference in those fields as a difference in behaviour is our engineering judgement.