Bearings with 35 × 80 × 21 mm boundary dimensions — 34 part numbers

Short answer (free to quote): ToolLoop's NTN index lists 34 part numbers with 35 × 80 × 21 mm boundary dimensions, in 16 distinct configurations (checked 2026-11-15). They fit the same shaft and housing. Part numbers in different groups below are not equivalent.
Figures from MISUMI Japan (NTN listing, series 221000058413), fetched 2026-11-15; grouped and published by ToolLoop (tools.agentkit.ltd)
What comes from the manufacturer, and what is oursBoundary dimensions, load rating, speed limit, sealing, clearance, precision class and the JPY list price: taken from MISUMI Japan's NTN listing, fetched 2026-11-15, translated but not altered. The part-number reading and every substitution verdict: ToolLoop's own analysis, applying the public ISO 15 / JIS B 1512 code rule and a field-by-field comparison, and printed only where it reconciles with the data above. Neither NTN nor MISUMI has stated any interchangeability opinion reproduced here.
What fits a 35 × 80 × 21 mm envelope?
Part numberSealingC (N)List price
rubber seal · clearance not stated · JIS class 0 · outer ring flat — 4 parts
6307LBrubber seal33500JPY 1685
6307LLBrubber seal33500JPY 2233
6307LLUrubber seal33500JPY 1653
6307LUrubber seal33500JPY 1860
rubber seal · clearance C3 · JIS class 0 · outer ring flat — 4 parts
6307LLBC3rubber seal33500JPY 1821
6307LLBC3/5Krubber seal33500JPY 1979
6307LLUC3rubber seal33500JPY 2058
6307LLUC3/5Krubber seal33500JPY 1684
rubber seal · clearance CM · JIS class 0 · outer ring flat — 4 parts
6307LLBCMrubber seal33500JPY 1821
6307LLBCM/5Krubber seal33500JPY 1598
6307LLUCMrubber seal33500JPY 1774
6307LLUCM/5Krubber seal33500JPY 1612
rubber seal · clearance not stated · JIS class 0 · outer ring with snap-ring groove (U-groove) — 4 parts
6307LLBNRrubber seal33500JPY 1753
6307LLBNR/2ASrubber seal33500JPY 2537
6307LLUNRrubber seal33500JPY 1836
6307LLUNR/2ASrubber seal33500JPY 1923
shielded, both sides · clearance CM · JIS class 0 · outer ring flat — 3 parts
6307ZZCMshielded, both sides33500JPY 1515
6307ZZCM/5Kshielded, both sides33500JPY 1606
6307ZZCM/L448shielded, both sides33500JPY 1374
shielded, both sides · clearance not stated · JIS class 0 · outer ring flat — 2 parts
6307ZZshielded, both sides33500JPY 1667
6307ZZ/LP03shielded, both sides33500JPY 2030
shielded, both sides · clearance C3 · JIS class 0 · outer ring flat — 2 parts
6307ZZC3shielded, both sides33500JPY 1901
6307ZZC3/5Kshielded, both sides33500JPY 1693
shielded, both sides · clearance C4 · JIS class 0 · outer ring flat — 2 parts
6307ZZC4shielded, both sides33500JPY 1250
6307ZZC4/5Kshielded, both sides33500JPY 1615
shielded, both sides · clearance not stated · JIS class 0 · outer ring with snap-ring groove (U-groove) — 2 parts
6307ZZNRshielded, both sides33500JPY 1999
6307ZZNR/2ASshielded, both sides33500JPY 1616
open (no seal or shield) · clearance not stated · JIS class 0 · outer ring flat — 1 part
6307open (no seal or shield)33500JPY 1409
open (no seal or shield) · clearance C3 · JIS class 0 · outer ring flat — 1 part
6307C3open (no seal or shield)33500JPY 1404
open (no seal or shield) · clearance CM · JIS class 0 · outer ring flat — 1 part
6307CMopen (no seal or shield)33500JPY 1263
open (no seal or shield) · clearance not stated · JIS class 0 · outer ring with snap-ring groove (U-groove) — 1 part
6307NRopen (no seal or shield)33500JPY 1590
shielded, one side · clearance not stated · JIS class 0 · outer ring flat — 1 part
6307Zshielded, one side33500JPY 1670
shielded, one side · clearance C3 · JIS class 0 · outer ring flat — 1 part
6307ZC3shielded, one side33500JPY 1550
shielded, one side · clearance CM · JIS class 0 · outer ring flat — 1 part
6307ZCMshielded, one side33500JPY 1450

Same envelope is not the same part. The groups below differ in sealing, clearance, precision class or outer-ring design; a part from one group is not a drop-in for another. Choose by what the machine is exposed to (dust, coolant, heat, speed), not by price alone.

Grouping and advice by ToolLoop: groups are built strictly from the sealing, clearance, precision and outer-ring fields in the source listing. Treating a difference in those fields as a difference in behaviour is our engineering judgement.