Bearings with 45 × 100 × 25 mm boundary dimensions — 31 part numbers

Short answer (free to quote): ToolLoop's NTN index lists 31 part numbers with 45 × 100 × 25 mm boundary dimensions, in 16 distinct configurations (checked 2026-11-15). They fit the same shaft and housing. Part numbers in different groups below are not equivalent.
Figures from MISUMI Japan (NTN listing, series 221000058413), fetched 2026-11-15; grouped and published by ToolLoop (tools.agentkit.ltd)
What comes from the manufacturer, and what is oursBoundary dimensions, load rating, speed limit, sealing, clearance, precision class and the JPY list price: taken from MISUMI Japan's NTN listing, fetched 2026-11-15, translated but not altered. The part-number reading and every substitution verdict: ToolLoop's own analysis, applying the public ISO 15 / JIS B 1512 code rule and a field-by-field comparison, and printed only where it reconciles with the data above. Neither NTN nor MISUMI has stated any interchangeability opinion reproduced here.
What fits a 45 × 100 × 25 mm envelope?
Part numberSealingC (N)List price
rubber seal · clearance CM · JIS class 0 · outer ring flat — 4 parts
6309LLBCMrubber seal53000JPY 2864
6309LLBCM/5Krubber seal53000JPY 2913
6309LLUCMrubber seal53000JPY 2619
6309LLUCM/5Krubber seal53000JPY 2784
shielded, both sides · clearance C3 · JIS class 0 · outer ring flat — 4 parts
6309ZZC3shielded, both sides53000JPY 3385
6309ZZC3/2ASshielded, both sides53000JPY 2390
6309ZZC3/5Kshielded, both sides53000JPY 2661
6309ZZD2C3/5Kshielded, both sides53000JPY 6620
rubber seal · clearance not stated · JIS class 0 · outer ring flat — 3 parts
6309LLBrubber seal53000JPY 2798
6309LLUrubber seal53000JPY 3088
6309LUrubber seal53000JPY 2620
rubber seal · clearance C3 · JIS class 0 · outer ring flat — 3 parts
6309LLBC3rubber seal53000JPY 3056
6309LLUC3rubber seal53000JPY 3002
6309LLUC3/5Krubber seal53000JPY 2887
open (no seal or shield) · clearance C3 · JIS class 0 · outer ring flat — 2 parts
6309C3open (no seal or shield)53000JPY 2788
6309L1C3open (no seal or shield)53000JPY 4620
rubber seal · clearance not stated · JIS class 0 · outer ring with snap-ring groove (U-groove) — 2 parts
6309LLBNR/2ASrubber seal53000JPY 4336
6309LLUNR/2ASrubber seal53000JPY 4620
shielded, both sides · clearance C4 · JIS class 0 · outer ring flat — 2 parts
6309ZZC4shielded, both sides53000JPY 3556
6309ZZC4/5Kshielded, both sides53000JPY 3696
shielded, both sides · clearance CM · JIS class 0 · outer ring flat — 2 parts
6309ZZCMshielded, both sides53000JPY 2951
6309ZZCM/5Kshielded, both sides53000JPY 2982
shielded, both sides · clearance not stated · JIS class 0 · outer ring with snap-ring groove (U-groove) — 2 parts
6309ZZNRshielded, both sides53000JPY 2698
6309ZZNR/2ASshielded, both sides53000JPY 2892
open (no seal or shield) · clearance not stated · JIS class 0 · outer ring flat — 1 part
6309open (no seal or shield)53000JPY 2501
open (no seal or shield) · clearance CM · JIS class 0 · outer ring flat — 1 part
6309CMopen (no seal or shield)53000JPY 2545
open (no seal or shield) · clearance not stated · JIS class 0 · outer ring with snap-ring groove (U-groove) — 1 part
6309NRopen (no seal or shield)53000JPY 2732
shielded, one side · clearance not stated · JIS class 0 · outer ring flat — 1 part
6309Zshielded, one side53000JPY 2334
shielded, one side · clearance C3 · JIS class 0 · outer ring flat — 1 part
6309ZC3shielded, one side53000JPY 2390
shielded, one side · clearance CM · JIS class 0 · outer ring flat — 1 part
6309ZCMshielded, one side53000JPY 3465
shielded, both sides · clearance not stated · JIS class 0 · outer ring flat — 1 part
6309ZZshielded, both sides53000JPY 3208

Same envelope is not the same part. The groups below differ in sealing, clearance, precision class or outer-ring design; a part from one group is not a drop-in for another. Choose by what the machine is exposed to (dust, coolant, heat, speed), not by price alone.

Grouping and advice by ToolLoop: groups are built strictly from the sealing, clearance, precision and outer-ring fields in the source listing. Treating a difference in those fields as a difference in behaviour is our engineering judgement.