Bearings with 60 × 95 × 18 mm boundary dimensions — 29 part numbers

Short answer (free to quote): ToolLoop's NTN index lists 29 part numbers with 60 × 95 × 18 mm boundary dimensions, in 17 distinct configurations (checked 2026-11-15). They fit the same shaft and housing. Part numbers in different groups below are not equivalent.
Figures from MISUMI Japan (NTN listing, series 221000058413), fetched 2026-11-15; grouped and published by ToolLoop (tools.agentkit.ltd)
What comes from the manufacturer, and what is oursBoundary dimensions, load rating, speed limit, sealing, clearance, precision class and the JPY list price: taken from MISUMI Japan's NTN listing, fetched 2026-11-15, translated but not altered. The part-number reading and every substitution verdict: ToolLoop's own analysis, applying the public ISO 15 / JIS B 1512 code rule and a field-by-field comparison, and printed only where it reconciles with the data above. Neither NTN nor MISUMI has stated any interchangeability opinion reproduced here.
What fits a 60 × 95 × 18 mm envelope?
Part numberSealingC (N)List price
rubber seal · clearance not stated · JIS class 0 · outer ring flat — 4 parts
6012LBrubber seal29500JPY 2359
6012LLBrubber seal29500JPY 3068
6012LLUrubber seal29500JPY 2531
6012LUrubber seal29500JPY 2250
rubber seal · clearance CM · JIS class 0 · outer ring flat — 4 parts
6012LLBCMrubber seal29500JPY 1912
6012LLBCM/5Krubber seal29500JPY 2534
6012LLUCMrubber seal29500JPY 2366
6012LLUCM/5Krubber seal29500JPY 2491
rubber seal · clearance not stated · JIS class 0 · outer ring with snap-ring groove (U-groove) — 4 parts
6012LLBNRrubber seal29500JPY 2879
6012LLBNR/2ASrubber seal29500JPY 2723
6012LLUNRrubber seal29500JPY 3599
6012LLUNR/2ASrubber seal29500JPY 2626
shielded, both sides · clearance C3 · JIS class 0 · outer ring flat — 2 parts
6012ZZC3shielded, both sides29500JPY 2307
6012ZZC3/5Kshielded, both sides29500JPY 3187
shielded, both sides · clearance CM · JIS class 0 · outer ring flat — 2 parts
6012ZZCMshielded, both sides29500JPY 1828
6012ZZCM/5Kshielded, both sides29500JPY 2511
shielded, both sides · clearance not stated · JIS class 0 · outer ring with snap-ring groove (U-groove) — 2 parts
6012ZZNRshielded, both sides29500JPY 2403
6012ZZNR/2ASshielded, both sides29500JPY 2401
open (no seal or shield) · clearance not stated · JIS class 0 · outer ring flat — 1 part
6012open (no seal or shield)29500JPY 2235
open (no seal or shield) · clearance C3 · JIS class 0 · outer ring flat — 1 part
6012C3open (no seal or shield)29500JPY 1817
open (no seal or shield) · clearance C4 · JIS class 0 · outer ring flat — 1 part
6012C4open (no seal or shield)29500JPY 1860
open (no seal or shield) · clearance CM · JIS class 0 · outer ring flat — 1 part
6012CMopen (no seal or shield)29500JPY 1817
open (no seal or shield) · clearance not stated · JIS class 0 · outer ring with snap-ring groove (U-groove) — 1 part
6012NRopen (no seal or shield)29500JPY 2120
open (no seal or shield) · clearance not stated · JIS class 4 · outer ring flat — 1 part
6012P4open (no seal or shield)29500JPY 8730
open (no seal or shield) · clearance not stated · JIS class 5 · outer ring flat — 1 part
6012P5open (no seal or shield)29500JPY 7402
shielded, one side · clearance not stated · JIS class 0 · outer ring flat — 1 part
6012Zshielded, one side29500JPY 2600
shielded, one side · clearance C3 · JIS class 0 · outer ring flat — 1 part
6012ZC3shielded, one side29500JPY 2050
shielded, one side · clearance CM · JIS class 0 · outer ring flat — 1 part
6012ZCMshielded, one side29500JPY 2616
shielded, both sides · clearance not stated · JIS class 0 · outer ring flat — 1 part
6012ZZshielded, both sides29500JPY 2346

Same envelope is not the same part. The groups below differ in sealing, clearance, precision class or outer-ring design; a part from one group is not a drop-in for another. Choose by what the machine is exposed to (dust, coolant, heat, speed), not by price alone.

Grouping and advice by ToolLoop: groups are built strictly from the sealing, clearance, precision and outer-ring fields in the source listing. Treating a difference in those fields as a difference in behaviour is our engineering judgement.