Bearings with 65 × 100 × 18 mm boundary dimensions — 20 part numbers

Short answer (free to quote): ToolLoop's NTN index lists 20 part numbers with 65 × 100 × 18 mm boundary dimensions, in 13 distinct configurations (checked 2026-11-15). They fit the same shaft and housing. Part numbers in different groups below are not equivalent.
Figures from MISUMI Japan (NTN listing, series 221000058413), fetched 2026-11-15; grouped and published by ToolLoop (tools.agentkit.ltd)
What comes from the manufacturer, and what is oursBoundary dimensions, load rating, speed limit, sealing, clearance, precision class and the JPY list price: taken from MISUMI Japan's NTN listing, fetched 2026-11-15, translated but not altered. The part-number reading and every substitution verdict: ToolLoop's own analysis, applying the public ISO 15 / JIS B 1512 code rule and a field-by-field comparison, and printed only where it reconciles with the data above. Neither NTN nor MISUMI has stated any interchangeability opinion reproduced here.
What fits a 65 × 100 × 18 mm envelope?
Part numberSealingC (N)List price
rubber seal · clearance not stated · JIS class 0 · outer ring flat — 4 parts
6013LBrubber seal30500JPY 2570
6013LLBrubber seal30500JPY 3078
6013LLUrubber seal30500JPY 3213
6013LUrubber seal30500JPY 2590
rubber seal · clearance CM · JIS class 0 · outer ring flat — 4 parts
6013LLBCMrubber seal30500JPY 2417
6013LLBCM/5Krubber seal30500JPY 2567
6013LLUCMrubber seal30500JPY 2737
6013LLUCM/5Krubber seal30500JPY 2779
shielded, both sides · clearance CM · JIS class 0 · outer ring flat — 2 parts
6013ZZCMshielded, both sides30500JPY 2610
6013ZZCM/5Kshielded, both sides30500JPY 2586
open (no seal or shield) · clearance not stated · JIS class 0 · outer ring flat — 1 part
6013open (no seal or shield)30500JPY 3139
open (no seal or shield) · clearance CM · JIS class 0 · outer ring flat — 1 part
6013CMopen (no seal or shield)30500JPY 2308
rubber seal · clearance C3 · JIS class 0 · outer ring flat — 1 part
6013LLUC3/5Krubber seal30500JPY 2590
open (no seal or shield) · clearance not stated · JIS class 0 · outer ring with snap-ring groove (U-groove) — 1 part
6013NRopen (no seal or shield)30500JPY 2624
open (no seal or shield) · clearance not stated · JIS class 5 · outer ring flat — 1 part
6013P5open (no seal or shield)30500JPY 9708
shielded, one side · clearance not stated · JIS class 0 · outer ring flat — 1 part
6013Zshielded, one side30500JPY 3045
shielded, one side · clearance C3 · JIS class 0 · outer ring flat — 1 part
6013ZC3shielded, one side30500JPY 2512
shielded, one side · clearance CM · JIS class 0 · outer ring flat — 1 part
6013ZCMshielded, one side30500JPY 3049
shielded, both sides · clearance not stated · JIS class 0 · outer ring flat — 1 part
6013ZZshielded, both sides30500JPY 2933
shielded, both sides · clearance C3 · JIS class 0 · outer ring flat — 1 part
6013ZZC3/5Kshielded, both sides30500JPY 2360

Same envelope is not the same part. The groups below differ in sealing, clearance, precision class or outer-ring design; a part from one group is not a drop-in for another. Choose by what the machine is exposed to (dust, coolant, heat, speed), not by price alone.

Grouping and advice by ToolLoop: groups are built strictly from the sealing, clearance, precision and outer-ring fields in the source listing. Treating a difference in those fields as a difference in behaviour is our engineering judgement.