Bearings with 65 × 120 × 23 mm boundary dimensions — 21 part numbers

Short answer (free to quote): ToolLoop's NTN index lists 21 part numbers with 65 × 120 × 23 mm boundary dimensions, in 14 distinct configurations (checked 2026-11-15). They fit the same shaft and housing. Part numbers in different groups below are not equivalent.
Figures from MISUMI Japan (NTN listing, series 221000058413), fetched 2026-11-15; grouped and published by ToolLoop (tools.agentkit.ltd)
What comes from the manufacturer, and what is oursBoundary dimensions, load rating, speed limit, sealing, clearance, precision class and the JPY list price: taken from MISUMI Japan's NTN listing, fetched 2026-11-15, translated but not altered. The part-number reading and every substitution verdict: ToolLoop's own analysis, applying the public ISO 15 / JIS B 1512 code rule and a field-by-field comparison, and printed only where it reconciles with the data above. Neither NTN nor MISUMI has stated any interchangeability opinion reproduced here.
What fits a 65 × 120 × 23 mm envelope?
Part numberSealingC (N)List price
rubber seal · clearance C3 · JIS class 0 · outer ring flat — 3 parts
6213L1C3rubber seal57500JPY 4970
6213LLBC3/5Krubber seal57500JPY 4610
6213LLUC3/5Krubber seal57500JPY 4610
rubber seal · clearance not stated · JIS class 0 · outer ring flat — 3 parts
6213LLBrubber seal57500JPY 3825
6213LLUrubber seal57500JPY 3823
6213LUrubber seal57500JPY 3315
rubber seal · clearance CM · JIS class 0 · outer ring flat — 3 parts
6213LLBCM/5Krubber seal57500JPY 3315
6213LLUCMrubber seal57500JPY 2813
6213LLUCM/5Krubber seal57500JPY 3503
shielded, both sides · clearance C3 · JIS class 0 · outer ring flat — 2 parts
6213ZZC3shielded, both sides57500JPY 3522
6213ZZC3/5Kshielded, both sides57500JPY 3102
open (no seal or shield) · clearance not stated · JIS class 0 · outer ring flat — 1 part
6213open (no seal or shield)57500JPY 3287
open (no seal or shield) · clearance C3 · JIS class 0 · outer ring flat — 1 part
6213C3open (no seal or shield)57500JPY 2885
open (no seal or shield) · clearance C4 · JIS class 0 · outer ring flat — 1 part
6213C4open (no seal or shield)57500JPY 2380
open (no seal or shield) · clearance CM · JIS class 0 · outer ring flat — 1 part
6213CMopen (no seal or shield)57500JPY 2921
open (no seal or shield) · clearance not stated · JIS class 0 · outer ring with snap-ring groove (U-groove) — 1 part
6213NRopen (no seal or shield)57500JPY 4430
shielded, one side · clearance not stated · JIS class 0 · outer ring flat — 1 part
6213Zshielded, one side57500JPY 3237
shielded, one side · clearance CM · JIS class 0 · outer ring flat — 1 part
6213ZCMshielded, one side57500JPY 2650
shielded, both sides · clearance not stated · JIS class 0 · outer ring flat — 1 part
6213ZZshielded, both sides57500JPY 3005
shielded, both sides · clearance CM · JIS class 0 · outer ring flat — 1 part
6213ZZCMshielded, both sides57500JPY 2481
shielded, both sides · clearance not stated · JIS class 0 · outer ring with snap-ring groove (U-groove) — 1 part
6213ZZNRshielded, both sides57500JPY 3338

Same envelope is not the same part. The groups below differ in sealing, clearance, precision class or outer-ring design; a part from one group is not a drop-in for another. Choose by what the machine is exposed to (dust, coolant, heat, speed), not by price alone.

Grouping and advice by ToolLoop: groups are built strictly from the sealing, clearance, precision and outer-ring fields in the source listing. Treating a difference in those fields as a difference in behaviour is our engineering judgement.