Bearings with 70 × 110 × 20 mm boundary dimensions — 23 part numbers

Short answer (free to quote): ToolLoop's NTN index lists 23 part numbers with 70 × 110 × 20 mm boundary dimensions, in 16 distinct configurations (checked 2026-11-15). They fit the same shaft and housing. Part numbers in different groups below are not equivalent.
Figures from MISUMI Japan (NTN listing, series 221000058413), fetched 2026-11-15; grouped and published by ToolLoop (tools.agentkit.ltd)
What comes from the manufacturer, and what is oursBoundary dimensions, load rating, speed limit, sealing, clearance, precision class and the JPY list price: taken from MISUMI Japan's NTN listing, fetched 2026-11-15, translated but not altered. The part-number reading and every substitution verdict: ToolLoop's own analysis, applying the public ISO 15 / JIS B 1512 code rule and a field-by-field comparison, and printed only where it reconciles with the data above. Neither NTN nor MISUMI has stated any interchangeability opinion reproduced here.
What fits a 70 × 110 × 20 mm envelope?
Part numberSealingC (N)List price
rubber seal · clearance not stated · JIS class 0 · outer ring flat — 4 parts
6014LBrubber seal38000JPY 3263
6014LLBrubber seal38000JPY 4058
6014LLUrubber seal38000JPY 3017
6014LUrubber seal38000JPY 3449
open (no seal or shield) · clearance not stated · JIS class 0 · outer ring flat — 2 parts
6014open (no seal or shield)38000JPY 2791
6014L1open (no seal or shield)38000JPY 3765
rubber seal · clearance C3 · JIS class 0 · outer ring flat — 2 parts
6014LLBC3rubber seal38000JPY 4054
6014LLUC3/5Krubber seal38000JPY 4570
rubber seal · clearance CM · JIS class 0 · outer ring flat — 2 parts
6014LLBCMrubber seal38000JPY 2761
6014LLBCM/5Krubber seal38000JPY 3445
shielded, both sides · clearance CM · JIS class 0 · outer ring flat — 2 parts
6014ZZCMshielded, both sides38000JPY 3047
6014ZZCM/5Kshielded, both sides38000JPY 2998
open (no seal or shield) · clearance C3 · JIS class 0 · outer ring flat — 1 part
6014C3open (no seal or shield)38000JPY 2360
open (no seal or shield) · clearance CM · JIS class 0 · outer ring flat — 1 part
6014CMopen (no seal or shield)38000JPY 2641
open (no seal or shield) · clearance not stated · JIS class 5 · outer ring flat — 1 part
6014P5open (no seal or shield)—JPY 8180
shielded, one side · clearance not stated · JIS class 0 · outer ring flat — 1 part
6014Zshielded, one side38000JPY 3414
shielded, one side · clearance C3 · JIS class 0 · outer ring flat — 1 part
6014ZC3shielded, one side38000JPY 2620
shielded, one side · clearance CM · JIS class 0 · outer ring flat — 1 part
6014ZCMshielded, one side38000JPY 3797
shielded, both sides · clearance not stated · JIS class 0 · outer ring flat — 1 part
6014ZZshielded, both sides38000JPY 2806
shielded, both sides · clearance C3 · JIS class 0 · outer ring flat — 1 part
6014ZZC3/5Kshielded, both sides38000JPY 2620
shielded, both sides · clearance C4 · JIS class 0 · outer ring flat — 1 part
6014ZZC4/2ASshielded, both sides38000JPY 2443
shielded, both sides · clearance not stated · JIS class 0 · outer ring with snap-ring groove (U-groove) — 1 part
6014ZZNR/2ASshielded, both sides38000JPY 4650
shielded, both sides · clearance not stated · JIS class 5 · outer ring flat — 1 part
6014ZZP5/2ASshielded, both sides38000JPY 7798

Same envelope is not the same part. The groups below differ in sealing, clearance, precision class or outer-ring design; a part from one group is not a drop-in for another. Choose by what the machine is exposed to (dust, coolant, heat, speed), not by price alone.

Grouping and advice by ToolLoop: groups are built strictly from the sealing, clearance, precision and outer-ring fields in the source listing. Treating a difference in those fields as a difference in behaviour is our engineering judgement.