Bearings with 70 × 125 × 24 mm boundary dimensions — 20 part numbers

Short answer (free to quote): ToolLoop's NTN index lists 20 part numbers with 70 × 125 × 24 mm boundary dimensions, in 13 distinct configurations (checked 2026-11-15). They fit the same shaft and housing. Part numbers in different groups below are not equivalent.
Figures from MISUMI Japan (NTN listing, series 221000058413), fetched 2026-11-15; grouped and published by ToolLoop (tools.agentkit.ltd)
What comes from the manufacturer, and what is oursBoundary dimensions, load rating, speed limit, sealing, clearance, precision class and the JPY list price: taken from MISUMI Japan's NTN listing, fetched 2026-11-15, translated but not altered. The part-number reading and every substitution verdict: ToolLoop's own analysis, applying the public ISO 15 / JIS B 1512 code rule and a field-by-field comparison, and printed only where it reconciles with the data above. Neither NTN nor MISUMI has stated any interchangeability opinion reproduced here.
What fits a 70 × 125 × 24 mm envelope?
Part numberSealingC (N)List price
rubber seal · clearance not stated · JIS class 0 · outer ring flat — 3 parts
6214L1rubber seal62000JPY 5310
6214LLBrubber seal62000JPY 3826
6214LLUrubber seal62000JPY 4213
rubber seal · clearance C3 · JIS class 0 · outer ring flat — 3 parts
6214LLBC3/5Krubber seal62000JPY 4799
6214LLUC3rubber seal62000JPY 3319
6214LLUC3/5Krubber seal62000JPY 3978
rubber seal · clearance CM · JIS class 0 · outer ring flat — 2 parts
6214LLUCMrubber seal62000JPY 3007
6214LLUCM/5Krubber seal62000JPY 3927
shielded, both sides · clearance C3 · JIS class 0 · outer ring flat — 2 parts
6214ZZC3shielded, both sides62000JPY 3196
6214ZZC3/5Kshielded, both sides62000JPY 3289
shielded, both sides · clearance CM · JIS class 0 · outer ring flat — 2 parts
6214ZZCMshielded, both sides62000JPY 3461
6214ZZCM/5Kshielded, both sides62000JPY 3289
open (no seal or shield) · clearance not stated · JIS class 0 · outer ring flat — 1 part
6214open (no seal or shield)62000JPY 3523
open (no seal or shield) · clearance C3 · JIS class 0 · outer ring flat — 1 part
6214C3open (no seal or shield)62000JPY 3100
open (no seal or shield) · clearance CM · JIS class 0 · outer ring flat — 1 part
6214CMopen (no seal or shield)62000JPY 2821
shielded, one side · clearance not stated · JIS class 0 · outer ring flat — 1 part
6214Zshielded, one side62000JPY 3115
shielded, one side · clearance C3 · JIS class 0 · outer ring flat — 1 part
6214ZC3shielded, one side62000JPY 4590
shielded, one side · clearance CM · JIS class 0 · outer ring flat — 1 part
6214ZCMshielded, one side62000JPY 2835
shielded, both sides · clearance not stated · JIS class 0 · outer ring flat — 1 part
6214ZZshielded, both sides62000JPY 3704
shielded, both sides · clearance not stated · JIS class 0 · outer ring with snap-ring groove (U-groove) — 1 part
6214ZZNR/2ASshielded, both sides62000JPY 4990

Same envelope is not the same part. The groups below differ in sealing, clearance, precision class or outer-ring design; a part from one group is not a drop-in for another. Choose by what the machine is exposed to (dust, coolant, heat, speed), not by price alone.

Grouping and advice by ToolLoop: groups are built strictly from the sealing, clearance, precision and outer-ring fields in the source listing. Treating a difference in those fields as a difference in behaviour is our engineering judgement.