Bearings with 90 × 160 × 30 mm boundary dimensions — 18 part numbers

Short answer (free to quote): ToolLoop's NTN index lists 18 part numbers with 90 × 160 × 30 mm boundary dimensions, in 15 distinct configurations (checked 2026-11-15). They fit the same shaft and housing. Part numbers in different groups below are not equivalent.
Figures from MISUMI Japan (NTN listing, series 221000058413), fetched 2026-11-15; grouped and published by ToolLoop (tools.agentkit.ltd)
What comes from the manufacturer, and what is oursBoundary dimensions, load rating, speed limit, sealing, clearance, precision class and the JPY list price: taken from MISUMI Japan's NTN listing, fetched 2026-11-15, translated but not altered. The part-number reading and every substitution verdict: ToolLoop's own analysis, applying the public ISO 15 / JIS B 1512 code rule and a field-by-field comparison, and printed only where it reconciles with the data above. Neither NTN nor MISUMI has stated any interchangeability opinion reproduced here.
What fits a 90 × 160 × 30 mm envelope?
Part numberSealingC (N)List price
rubber seal · clearance CM · JIS class 0 · outer ring flat — 3 parts
6218LLBCMrubber seal96000JPY 6323
6218LLBCM/5Krubber seal96000JPY 7150
6218LLUCMrubber seal96000JPY 5881
shielded, both sides · clearance CM · JIS class 0 · outer ring flat — 2 parts
6218ZZCMshielded, both sides96000JPY 5322
6218ZZCM/5Kshielded, both sides96000JPY 6562
open (no seal or shield) · clearance not stated · JIS class 0 · outer ring flat — 1 part
6218open (no seal or shield)96000JPY 6051
open (no seal or shield) · clearance C3 · JIS class 0 · outer ring flat — 1 part
6218C3open (no seal or shield)96000JPY 5698
open (no seal or shield) · clearance C4 · JIS class 0 · outer ring flat — 1 part
6218C4open (no seal or shield)96000JPY 5141
open (no seal or shield) · clearance CM · JIS class 0 · outer ring flat — 1 part
6218CMopen (no seal or shield)96000JPY 5422
rubber seal · clearance not stated · JIS class 0 · outer ring flat — 1 part
6218LLBrubber seal96000JPY 7442
rubber seal · clearance C3 · JIS class 0 · outer ring flat — 1 part
6218LLBC3/5Krubber seal96000JPY 8697
open (no seal or shield) · clearance not stated · JIS class 0 · outer ring with snap-ring groove (U-groove) — 1 part
6218NRopen (no seal or shield)96000JPY 7050
shielded, one side · clearance C3 · JIS class 0 · outer ring flat — 1 part
6218ZC3shielded, one side96000JPY 6562
shielded, one side · clearance C4 · JIS class 0 · outer ring flat — 1 part
6218ZC4shielded, one side96000JPY 6518
shielded, one side · clearance not stated · JIS class 0 · outer ring with snap-ring groove (U-groove) — 1 part
6218ZNRshielded, one side96000JPY 7750
shielded, both sides · clearance not stated · JIS class 0 · outer ring flat — 1 part
6218ZZshielded, both sides96000JPY 6784
shielded, both sides · clearance C3 · JIS class 0 · outer ring flat — 1 part
6218ZZC3/5Kshielded, both sides96000JPY 6940
shielded, both sides · clearance not stated · JIS class 0 · outer ring with snap-ring groove (U-groove) — 1 part
6218ZZNR/2ASshielded, both sides96000JPY 7750

Same envelope is not the same part. The groups below differ in sealing, clearance, precision class or outer-ring design; a part from one group is not a drop-in for another. Choose by what the machine is exposed to (dust, coolant, heat, speed), not by price alone.

Grouping and advice by ToolLoop: groups are built strictly from the sealing, clearance, precision and outer-ring fields in the source listing. Treating a difference in those fields as a difference in behaviour is our engineering judgement.