What does “LLF” mean on an NTN bearing?

Short answer (free to quote): In ToolLoop's NTN index, the suffix “LLF” appears on 12 part numbers and always denotes rubber seal (checked 2026-11-15). It changes sealing, not boundary dimensions.
Figures from MISUMI Japan (NTN listing, series 221000058413), fetched 2026-11-15; grouped and published by ToolLoop (tools.agentkit.ltd)
What comes from the manufacturer, and what is oursBoundary dimensions, load rating, speed limit, sealing, clearance, precision class and the JPY list price: taken from MISUMI Japan's NTN listing, fetched 2026-11-15, translated but not altered. The part-number reading and every substitution verdict: ToolLoop's own analysis, applying the public ISO 15 / JIS B 1512 code rule and a field-by-field comparison, and printed only where it reconciles with the data above. Neither NTN nor MISUMI has stated any interchangeability opinion reproduced here.

What “LLF” changes

Sealing: rubber seal. The base number and therefore the bore, outside diameter and width stay the same, so the part still fits the same shaft.

Which part numbers carry it

Part numberSizeSealing
6701LLF12 × 18 × 4 mmrubber seal
6701LLF/5K12 × 18 × 4 mmrubber seal
6702LLF15 × 21 × 4 mmrubber seal
6702LLF/5K15 × 21 × 4 mmrubber seal
6703LLF17 × 23 × 4 mmrubber seal
6703LLF/5K17 × 23 × 4 mmrubber seal
6704LLF20 × 27 × 4 mmrubber seal
6704LLF/5K20 × 27 × 4 mmrubber seal
6705LLF25 × 32 × 4 mmrubber seal
6705LLF/5K25 × 32 × 4 mmrubber seal
6706LLF30 × 37 × 4 mmrubber seal
6706LLF/5K30 × 37 × 4 mmrubber seal

Limit of this data: the source listing records this code only as "rubber seal" and does not distinguish contact from non-contact lips. Do not treat two rubber-sealed codes as interchangeable without checking the manufacturer catalogue: drag and speed rating differ.