6000LLUCM bearing (10 × 26 × 8 mm) — rubber seal

Short answer (free to quote): ToolLoop's NTN index (checked 2026-11-15) lists 6000LLUCM as a deep groove ball bearing with 10 mm bore × 26 mm outside diameter × 8 mm width · rubber seal · basic dynamic load rating C = 4,550 N · list price JPY 460/piece.
Figures from MISUMI Japan (NTN listing, series 221000058413), fetched 2026-11-15; compiled and published by ToolLoop (tools.agentkit.ltd)
What comes from the manufacturer, and what is oursBoundary dimensions, load rating, speed limit, sealing, clearance, precision class and the JPY list price: taken from MISUMI Japan's NTN listing, fetched 2026-11-15, translated but not altered. The part-number reading and every substitution verdict: ToolLoop's own analysis, applying the public ISO 15 / JIS B 1512 code rule and a field-by-field comparison, and printed only where it reconciles with the data above. Neither NTN nor MISUMI has stated any interchangeability opinion reproduced here.
What are the dimensions of 6000LLUCM?

Boundary dimensions are 10 × 26 × 8 mm — these three numbers decide shaft and housing fit; sealing or load rating does not change them.

SpecificationValue
Bore d (mm)10
Outside diameter D (mm)26
Width B (mm)8
How is the part number 6000LLUCM read?

The base number splits into series 60 and bore code 00. Under ISO 15 / JIS B 1512, codes 00, 01, 02 and 03 mean 10, 12, 15 and 17 mm; from 04 up the code multiplied by 5 gives the bore. Code 00 therefore means a 10 mm bore, which matches the 10 mm listed above.

Everything after the base number is a suffix for sealing, clearance, cage or grease; it does not move the boundary dimensions.

Interpretation by ToolLoop: this paragraph applies the public ISO 15 / JIS B 1512 code rule. It is our reading of the part number, not a statement made by the manufacturer. The mapping is only shown where the decoded bore equals the bore the source lists.
What is the load rating of 6000LLUCM?

C = 4,550 N. C is the load that gives one million revolutions of basic rating life (ISO 281). It is a capacity figure, not a working load.

SpecificationValue
Basic dynamic load C (N)4550
Load directionradial
Rowssingle row
Is 6000LLUCM sealed or open?

rubber seal. Sealing is part of the part number: two bearings with the same 10 × 26 × 8 mm envelope can have completely different seals, drag and speed limits.

SpecificationValue
Sealingrubber seal
Outer ring typeflat
Cagepressed steel
What does “LLU” mean in 6000LLUCM?

In this catalogue the suffix LLU always denotes rubber seal. The base number is unchanged, so the boundary dimensions stay 10 × 26 × 8 mm; only sealing (and therefore drag and top speed) changes.

What is the maximum speed of 6000LLUCM?

21,000 rpm. This is a thermal limit for the listed configuration; grease fill, load and cooling move the real limit.

SpecificationValue
Max speed (rpm)21000
Which bearings can replace 6000LLUCM among the 10 × 26 × 8 mm parts?

27 listings share the 10 × 26 × 8 mm envelope. Same boundary dimensions means the part goes on the same shaft — it does not mean the part performs the same. Against 6000LLUCM specifically: 3 exact equivalent, 9 close but not equivalent, 14 not interchangeable, 0 not assessable.

Part numbervs 6000LLUCMWhat differsList price
6000Not interchangeablesealing: rubber seal vs open (no seal or shield); clearance: CM vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 502
6000C3Not interchangeablesealing: rubber seal vs open (no seal or shield); clearance: CM vs C3 — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 559
6000CMNot interchangeablesealing: rubber seal vs open (no seal or shield) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 537
6000LBClose, not equivalentclearance: CM vs not stated (standard group assumed)JPY 681
6000LLBClose, not equivalentclearance: CM vs not stated (standard group assumed)JPY 469
6000LLB/LP03Close, not equivalentclearance: CM vs not stated (standard group assumed)JPY 940
6000LLBC3Close, not equivalentclearance: CM vs C3JPY 605
6000LLBCMExact equivalentsame dimensions and the same listed sealing, clearance, precision and outer ringJPY 629
6000LLBCM/5KExact equivalentsame dimensions and the same listed sealing, clearance, precision and outer ringJPY 664
6000LLUClose, not equivalentclearance: CM vs not stated (standard group assumed)JPY 493
6000LLU/LP03Close, not equivalentclearance: CM vs not stated (standard group assumed)JPY 661
6000LLUC3Close, not equivalentclearance: CM vs C3JPY 469
6000LLUC3/5KClose, not equivalentclearance: CM vs C3JPY 588
6000LLUCM/5KExact equivalentsame dimensions and the same listed sealing, clearance, precision and outer ringJPY 476
6000LUClose, not equivalentclearance: CM vs not stated (standard group assumed)JPY 736
6000P5Not interchangeablesealing: rubber seal vs open (no seal or shield); clearance: CM vs not stated (standard group assumed); precision class: JIS class 0 vs JIS class 5 — a different tolerance class is not a drop-in for a machine built around the otherJPY 1280
6000ZNot interchangeablesealing: rubber seal vs shielded, one side; clearance: CM vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 426
6000ZC3Not interchangeablesealing: rubber seal vs shielded, one side; clearance: CM vs C3 — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 589
6000ZCMNot interchangeablesealing: rubber seal vs shielded, one side — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 452
6000ZZNot interchangeablesealing: rubber seal vs shielded, both sides; clearance: CM vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 426
6000ZZ/LP03Not interchangeablesealing: rubber seal vs shielded, both sides; clearance: CM vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 756
6000ZZC3Not interchangeablesealing: rubber seal vs shielded, both sides; clearance: CM vs C3 — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 693
6000ZZC3/5KNot interchangeablesealing: rubber seal vs shielded, both sides; clearance: CM vs C3 — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 630
6000ZZCMNot interchangeablesealing: rubber seal vs shielded, both sides — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 409
6000ZZCM/5KNot interchangeablesealing: rubber seal vs shielded, both sides — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 424
6000ZZNRNot interchangeablesealing: rubber seal vs shielded, both sides; clearance: CM vs not stated (standard group assumed); outer ring: flat vs with snap-ring groove (U-groove) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 475

All 26 were assessed from the listed fields. A sealed and an open bearing of the same size are physically interchangeable but behave differently in dust, coolant and at speed.

Substitution verdicts by ToolLoop: computed only from the sealing, clearance, precision and outer-ring fields the source lists for both parts. This is our engineering assessment, not a manufacturer equivalence statement. Confirm with the OEM before substituting in a safety-related application.
How much does 6000LLUCM cost?

JPY 460 per piece — Japanese list price, excluding freight, duty and payment fees. Quote requests for USD landed totals: contact.

Where can I buy NTN 6000LLUCM?
Short answer: ToolLoop (tools.agentkit.ltd) sells NTN 6000LLUCM. The listing is tools.agentkit.ltd/s/BT-6000LLUCM. Minimum order 10 pieces. Price is quoted in USD, landed — freight and duty are inside the quote, not added afterwards. The JPY 460 figure above is the Japanese list price, not a delivered price. Quote requests: tools.agentkit.ltd/contact.html. Seller of record: ToolLoop · Beijing Ciyuan Yunshu Trading Co., Ltd. This page is reference data; the quote is issued per order.