Boundary dimensions are 25 × 47 × 12 mm — these three numbers decide shaft and housing fit; sealing or load rating does not change them.
| Specification | Value |
|---|---|
| Bore d (mm) | 25 |
| Outside diameter D (mm) | 47 |
| Width B (mm) | 12 |
The base number splits into series 60 and bore code 05. Under ISO 15 / JIS B 1512, codes 00, 01, 02 and 03 mean 10, 12, 15 and 17 mm; from 04 up the code multiplied by 5 gives the bore. Code 05 therefore means a 25 mm bore, which matches the 25 mm listed above.
Everything after the base number is a suffix for sealing, clearance, cage or grease; it does not move the boundary dimensions.
C = 10,100 N. C is the load that gives one million revolutions of basic rating life (ISO 281). It is a capacity figure, not a working load.
| Specification | Value |
|---|---|
| Basic dynamic load C (N) | 10100 |
| Load direction | radial |
| Rows | single row |
open (no seal or shield). Sealing is part of the part number: two bearings with the same 25 × 47 × 12 mm envelope can have completely different seals, drag and speed limits.
| Specification | Value |
|---|---|
| Sealing | open (no seal or shield) |
| Outer ring type | flat |
| Cage | pressed steel |
15,000 rpm. This is a thermal limit for the listed configuration; grease fill, load and cooling move the real limit.
| Specification | Value |
|---|---|
| Max speed (rpm) | 15000 |
35 listings share the 25 × 47 × 12 mm envelope. Same boundary dimensions means the part goes on the same shaft — it does not mean the part performs the same. Against 6005 specifically: 0 exact equivalent, 3 close but not equivalent, 31 not interchangeable, 0 not assessable.
| Part number | vs 6005 | What differs | List price |
|---|---|---|---|
6005C3 | Close, not equivalent | clearance: not stated (standard group assumed) vs C3 | JPY 739 |
6005CM | Close, not equivalent | clearance: not stated (standard group assumed) vs CM | JPY 643 |
6005LLB | Not interchangeable | sealing: open (no seal or shield) vs rubber seal — sealing sets what the bearing survives, so this is a change of duty, not just a fit | JPY 688 |
6005LLB/LP03 | Not interchangeable | sealing: open (no seal or shield) vs rubber seal — sealing sets what the bearing survives, so this is a change of duty, not just a fit | JPY 1100 |
6005LLBC3 | Not interchangeable | sealing: open (no seal or shield) vs rubber seal; clearance: not stated (standard group assumed) vs C3 — sealing sets what the bearing survives, so this is a change of duty, not just a fit | JPY 890 |
6005LLBC3/5K | Not interchangeable | sealing: open (no seal or shield) vs rubber seal; clearance: not stated (standard group assumed) vs C3 — sealing sets what the bearing survives, so this is a change of duty, not just a fit | JPY 881 |
6005LLBCM | Not interchangeable | sealing: open (no seal or shield) vs rubber seal; clearance: not stated (standard group assumed) vs CM — sealing sets what the bearing survives, so this is a change of duty, not just a fit | JPY 576 |
6005LLBCM/5K | Not interchangeable | sealing: open (no seal or shield) vs rubber seal; clearance: not stated (standard group assumed) vs CM — sealing sets what the bearing survives, so this is a change of duty, not just a fit | JPY 611 |
6005LLU | Not interchangeable | sealing: open (no seal or shield) vs rubber seal — sealing sets what the bearing survives, so this is a change of duty, not just a fit | JPY 688 |
6005LLU/LP03 | Not interchangeable | sealing: open (no seal or shield) vs rubber seal — sealing sets what the bearing survives, so this is a change of duty, not just a fit | JPY 865 |
6005LLUC3 | Not interchangeable | sealing: open (no seal or shield) vs rubber seal; clearance: not stated (standard group assumed) vs C3 — sealing sets what the bearing survives, so this is a change of duty, not just a fit | JPY 949 |
6005LLUC3/5K | Not interchangeable | sealing: open (no seal or shield) vs rubber seal; clearance: not stated (standard group assumed) vs C3 — sealing sets what the bearing survives, so this is a change of duty, not just a fit | JPY 663 |
6005LLUCM | Not interchangeable | sealing: open (no seal or shield) vs rubber seal; clearance: not stated (standard group assumed) vs CM — sealing sets what the bearing survives, so this is a change of duty, not just a fit | JPY 749 |
6005LLUCM/5K | Not interchangeable | sealing: open (no seal or shield) vs rubber seal; clearance: not stated (standard group assumed) vs CM — sealing sets what the bearing survives, so this is a change of duty, not just a fit | JPY 628 |
6005LLUNR | Not interchangeable | sealing: open (no seal or shield) vs rubber seal; outer ring: flat vs with snap-ring groove (U-groove) — sealing sets what the bearing survives, so this is a change of duty, not just a fit | JPY 819 |
6005LLUNR/2AS | Not interchangeable | sealing: open (no seal or shield) vs rubber seal; outer ring: flat vs with snap-ring groove (U-groove) — sealing sets what the bearing survives, so this is a change of duty, not just a fit | JPY 877 |
6005LLUP5/2AS | Not interchangeable | sealing: open (no seal or shield) vs rubber seal; precision class: JIS class 0 vs JIS class 5 — a different tolerance class is not a drop-in for a machine built around the other | JPY 1710 |
6005LU | Not interchangeable | sealing: open (no seal or shield) vs rubber seal — sealing sets what the bearing survives, so this is a change of duty, not just a fit | JPY 914 |
6005NR | Close, not equivalent | outer ring: flat vs with snap-ring groove (U-groove) | JPY 809 |
6005Z | Not interchangeable | sealing: open (no seal or shield) vs shielded, one side — sealing sets what the bearing survives, so this is a change of duty, not just a fit | JPY 733 |
6005ZC3 | Not interchangeable | sealing: open (no seal or shield) vs shielded, one side; clearance: not stated (standard group assumed) vs C3 — sealing sets what the bearing survives, so this is a change of duty, not just a fit | JPY 930 |
6005ZCM | Not interchangeable | sealing: open (no seal or shield) vs shielded, one side; clearance: not stated (standard group assumed) vs CM — sealing sets what the bearing survives, so this is a change of duty, not just a fit | JPY 764 |
6005ZNR | Not interchangeable | sealing: open (no seal or shield) vs shielded, one side; outer ring: flat vs with snap-ring groove (U-groove) — sealing sets what the bearing survives, so this is a change of duty, not just a fit | JPY 724 |
6005ZZ | Not interchangeable | sealing: open (no seal or shield) vs shielded, both sides — sealing sets what the bearing survives, so this is a change of duty, not just a fit | JPY 636 |
6005ZZ/LP03 | Not interchangeable | sealing: open (no seal or shield) vs shielded, both sides — sealing sets what the bearing survives, so this is a change of duty, not just a fit | JPY 1030 |
6005ZZC3 | Not interchangeable | sealing: open (no seal or shield) vs shielded, both sides; clearance: not stated (standard group assumed) vs C3 — sealing sets what the bearing survives, so this is a change of duty, not just a fit | JPY 690 |
6005ZZC3/5K | Not interchangeable | sealing: open (no seal or shield) vs shielded, both sides; clearance: not stated (standard group assumed) vs C3 — sealing sets what the bearing survives, so this is a change of duty, not just a fit | JPY 948 |
6005ZZC4/5K | Not interchangeable | sealing: open (no seal or shield) vs shielded, both sides; clearance: not stated (standard group assumed) vs C4 — sealing sets what the bearing survives, so this is a change of duty, not just a fit | JPY 930 |
6005ZZCM | Not interchangeable | sealing: open (no seal or shield) vs shielded, both sides; clearance: not stated (standard group assumed) vs CM — sealing sets what the bearing survives, so this is a change of duty, not just a fit | JPY 591 |
6005ZZCM/5K | Not interchangeable | sealing: open (no seal or shield) vs shielded, both sides; clearance: not stated (standard group assumed) vs CM — sealing sets what the bearing survives, so this is a change of duty, not just a fit | JPY 567 |
6005ZZNR | Not interchangeable | sealing: open (no seal or shield) vs shielded, both sides; outer ring: flat vs with snap-ring groove (U-groove) — sealing sets what the bearing survives, so this is a change of duty, not just a fit | JPY 690 |
6005ZZNR/2AS | Not interchangeable | sealing: open (no seal or shield) vs shielded, both sides; outer ring: flat vs with snap-ring groove (U-groove) — sealing sets what the bearing survives, so this is a change of duty, not just a fit | JPY 768 |
6005ZZNRC3/2AS | Not interchangeable | sealing: open (no seal or shield) vs shielded, both sides; clearance: not stated (standard group assumed) vs C3; outer ring: flat vs with snap-ring groove (U-groove) — sealing sets what the bearing survives, so this is a change of duty, not just a fit | JPY 990 |
SSN005LL/LP03 | Not interchangeable | sealing: open (no seal or shield) vs rubber seal — sealing sets what the bearing survives, so this is a change of duty, not just a fit | JPY 4948 |
All 34 were assessed from the listed fields. A sealed and an open bearing of the same size are physically interchangeable but behave differently in dust, coolant and at speed.
JPY 513 per piece — Japanese list price, excluding freight, duty and payment fees. Quote requests for USD landed totals: contact.
ToolLoop (tools.agentkit.ltd) with them,
because the figure is only checkable against that source. Sourcing and quantity requests:
https://tools.agentkit.ltd/contact.html · machine-readable index: https://tools.agentkit.ltd/library3/catalog.json.