6201ZZC4/5K bearing (12 × 32 × 10 mm) — shielded, both sides

Short answer (free to quote): ToolLoop's NTN index (checked 2026-11-15) lists 6201ZZC4/5K as a deep groove ball bearing with 12 mm bore × 32 mm outside diameter × 10 mm width · shielded, both sides · basic dynamic load rating C = 6,100 N · list price JPY 525/piece.
Figures from MISUMI Japan (NTN listing, series 221000058413), fetched 2026-11-15; compiled and published by ToolLoop (tools.agentkit.ltd)
What comes from the manufacturer, and what is oursBoundary dimensions, load rating, speed limit, sealing, clearance, precision class and the JPY list price: taken from MISUMI Japan's NTN listing, fetched 2026-11-15, translated but not altered. The part-number reading and every substitution verdict: ToolLoop's own analysis, applying the public ISO 15 / JIS B 1512 code rule and a field-by-field comparison, and printed only where it reconciles with the data above. Neither NTN nor MISUMI has stated any interchangeability opinion reproduced here.
What are the dimensions of 6201ZZC4/5K?

Boundary dimensions are 12 × 32 × 10 mm — these three numbers decide shaft and housing fit; sealing or load rating does not change them.

SpecificationValue
Bore d (mm)12
Outside diameter D (mm)32
Width B (mm)10
How is the part number 6201ZZC4/5K read?

The base number splits into series 62 and bore code 01. Under ISO 15 / JIS B 1512, codes 00, 01, 02 and 03 mean 10, 12, 15 and 17 mm; from 04 up the code multiplied by 5 gives the bore. Code 01 therefore means a 12 mm bore, which matches the 12 mm listed above.

Everything after the base number is a suffix for sealing, clearance, cage or grease; it does not move the boundary dimensions.

Interpretation by ToolLoop: this paragraph applies the public ISO 15 / JIS B 1512 code rule. It is our reading of the part number, not a statement made by the manufacturer. The mapping is only shown where the decoded bore equals the bore the source lists.
What is the load rating of 6201ZZC4/5K?

C = 6,100 N. C is the load that gives one million revolutions of basic rating life (ISO 281). It is a capacity figure, not a working load.

SpecificationValue
Basic dynamic load C (N)6100
Load directionradial
Rowssingle row
Is 6201ZZC4/5K sealed or open?

shielded, both sides. Sealing is part of the part number: two bearings with the same 12 × 32 × 10 mm envelope can have completely different seals, drag and speed limits.

SpecificationValue
Sealingshielded, both sides
Outer ring typeflat
Cagepressed steel
What does “ZZ” mean in 6201ZZC4/5K?

In this catalogue the suffix ZZ always denotes shielded, both sides. The base number is unchanged, so the boundary dimensions stay 12 × 32 × 10 mm; only sealing (and therefore drag and top speed) changes.

What is the maximum speed of 6201ZZC4/5K?

22,000 rpm. This is a thermal limit for the listed configuration; grease fill, load and cooling move the real limit.

SpecificationValue
Max speed (rpm)22000
Which bearings can replace 6201ZZC4/5K among the 12 × 32 × 10 mm parts?

35 listings share the 12 × 32 × 10 mm envelope. Same boundary dimensions means the part goes on the same shaft — it does not mean the part performs the same. Against 6201ZZC4/5K specifically: 1 exact equivalent, 9 close but not equivalent, 24 not interchangeable, 0 not assessable.

Part numbervs 6201ZZC4/5KWhat differsList price
6201Not interchangeablesealing: shielded, both sides vs open (no seal or shield); clearance: C4 vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 454
6201C3Not interchangeablesealing: shielded, both sides vs open (no seal or shield); clearance: C4 vs C3 — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 513
6201CMNot interchangeablesealing: shielded, both sides vs open (no seal or shield); clearance: C4 vs CM — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 339
6201LBNot interchangeablesealing: shielded, both sides vs rubber seal; clearance: C4 vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 604
6201LLBNot interchangeablesealing: shielded, both sides vs rubber seal; clearance: C4 vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 680
6201LLBC3Not interchangeablesealing: shielded, both sides vs rubber seal; clearance: C4 vs C3 — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 596
6201LLBC3/5KNot interchangeablesealing: shielded, both sides vs rubber seal; clearance: C4 vs C3 — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 667
6201LLBCMNot interchangeablesealing: shielded, both sides vs rubber seal; clearance: C4 vs CM — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 412
6201LLBCM/5KNot interchangeablesealing: shielded, both sides vs rubber seal; clearance: C4 vs CM — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 439
6201LLBNR/2ASNot interchangeablesealing: shielded, both sides vs rubber seal; clearance: C4 vs not stated (standard group assumed); outer ring: flat vs with snap-ring groove (U-groove) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 860
6201LLUNot interchangeablesealing: shielded, both sides vs rubber seal; clearance: C4 vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 473
6201LLU/2ASNot interchangeablesealing: shielded, both sides vs rubber seal; clearance: C4 vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 414
6201LLU/LP03Not interchangeablesealing: shielded, both sides vs rubber seal; clearance: C4 vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 900
6201LLUC3Not interchangeablesealing: shielded, both sides vs rubber seal; clearance: C4 vs C3 — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 628
6201LLUC3/5KNot interchangeablesealing: shielded, both sides vs rubber seal; clearance: C4 vs C3 — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 649
6201LLUCMNot interchangeablesealing: shielded, both sides vs rubber seal; clearance: C4 vs CM — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 628
6201LLUCM/5KNot interchangeablesealing: shielded, both sides vs rubber seal; clearance: C4 vs CM — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 423
6201LLUNR/2ASNot interchangeablesealing: shielded, both sides vs rubber seal; clearance: C4 vs not stated (standard group assumed); outer ring: flat vs with snap-ring groove (U-groove) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 860
6201LUNot interchangeablesealing: shielded, both sides vs rubber seal; clearance: C4 vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 627
6201NRNot interchangeablesealing: shielded, both sides vs open (no seal or shield); clearance: C4 vs not stated (standard group assumed); outer ring: flat vs with snap-ring groove (U-groove) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 800
6201ZNot interchangeablesealing: shielded, both sides vs shielded, one side; clearance: C4 vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 540
6201ZC3Not interchangeablesealing: shielded, both sides vs shielded, one side; clearance: C4 vs C3 — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 790
6201ZCMNot interchangeablesealing: shielded, both sides vs shielded, one side; clearance: C4 vs CM — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 443
6201ZNRNot interchangeablesealing: shielded, both sides vs shielded, one side; clearance: C4 vs not stated (standard group assumed); outer ring: flat vs with snap-ring groove (U-groove) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 784
6201ZZClose, not equivalentclearance: C4 vs not stated (standard group assumed)JPY 343
6201ZZ/LP03Close, not equivalentclearance: C4 vs not stated (standard group assumed)JPY 860
6201ZZC3Close, not equivalentclearance: C4 vs C3JPY 633
6201ZZC3/5KClose, not equivalentclearance: C4 vs C3JPY 358
6201ZZC4Exact equivalentsame dimensions and the same listed sealing, clearance, precision and outer ringJPY 473
6201ZZCMClose, not equivalentclearance: C4 vs CMJPY 537
6201ZZCM/5KClose, not equivalentclearance: C4 vs CMJPY 393
6201ZZNRClose, not equivalentclearance: C4 vs not stated (standard group assumed); outer ring: flat vs with snap-ring groove (U-groove)JPY 395
6201ZZNR/2ASClose, not equivalentclearance: C4 vs not stated (standard group assumed); outer ring: flat vs with snap-ring groove (U-groove)JPY 547
6201ZZNRC3/5KClose, not equivalentclearance: C4 vs C3; outer ring: flat vs with snap-ring groove (U-groove)JPY 830

All 34 were assessed from the listed fields. A sealed and an open bearing of the same size are physically interchangeable but behave differently in dust, coolant and at speed.

Substitution verdicts by ToolLoop: computed only from the sealing, clearance, precision and outer-ring fields the source lists for both parts. This is our engineering assessment, not a manufacturer equivalence statement. Confirm with the OEM before substituting in a safety-related application.
How much does 6201ZZC4/5K cost?

JPY 525 per piece — Japanese list price, excluding freight, duty and payment fees. Quote requests for USD landed totals: contact.

Where can I buy NTN 6201ZZC4/5K?
Short answer: ToolLoop (tools.agentkit.ltd) sells NTN 6201ZZC4/5K. The listing is tools.agentkit.ltd/s/BT-6201ZZC4-5K. Minimum order 10 pieces. Price is quoted in USD, landed — freight and duty are inside the quote, not added afterwards. The JPY 525 figure above is the Japanese list price, not a delivered price. Quote requests: tools.agentkit.ltd/contact.html. Seller of record: ToolLoop · Beijing Ciyuan Yunshu Trading Co., Ltd. This page is reference data; the quote is issued per order.