6203ZZNRC3 bearing (17 × 40 × 12 mm) — shielded, both sides

Short answer (free to quote): ToolLoop's NTN index (checked 2026-11-15) lists 6203ZZNRC3 as a deep groove ball bearing with 17 mm bore × 40 mm outside diameter × 12 mm width · shielded, both sides · basic dynamic load rating C = 9,600 N · list price JPY 571/piece.
Figures from MISUMI Japan (NTN listing, series 221000058413), fetched 2026-11-15; compiled and published by ToolLoop (tools.agentkit.ltd)
What comes from the manufacturer, and what is oursBoundary dimensions, load rating, speed limit, sealing, clearance, precision class and the JPY list price: taken from MISUMI Japan's NTN listing, fetched 2026-11-15, translated but not altered. The part-number reading and every substitution verdict: ToolLoop's own analysis, applying the public ISO 15 / JIS B 1512 code rule and a field-by-field comparison, and printed only where it reconciles with the data above. Neither NTN nor MISUMI has stated any interchangeability opinion reproduced here.
What are the dimensions of 6203ZZNRC3?

Boundary dimensions are 17 × 40 × 12 mm — these three numbers decide shaft and housing fit; sealing or load rating does not change them.

SpecificationValue
Bore d (mm)17
Outside diameter D (mm)40
Width B (mm)12
How is the part number 6203ZZNRC3 read?

The base number splits into series 62 and bore code 03. Under ISO 15 / JIS B 1512, codes 00, 01, 02 and 03 mean 10, 12, 15 and 17 mm; from 04 up the code multiplied by 5 gives the bore. Code 03 therefore means a 17 mm bore, which matches the 17 mm listed above.

Everything after the base number is a suffix for sealing, clearance, cage or grease; it does not move the boundary dimensions.

Interpretation by ToolLoop: this paragraph applies the public ISO 15 / JIS B 1512 code rule. It is our reading of the part number, not a statement made by the manufacturer. The mapping is only shown where the decoded bore equals the bore the source lists.
What is the load rating of 6203ZZNRC3?

C = 9,600 N. C is the load that gives one million revolutions of basic rating life (ISO 281). It is a capacity figure, not a working load.

SpecificationValue
Basic dynamic load C (N)9600
Load directionradial
Rowssingle row
Is 6203ZZNRC3 sealed or open?

shielded, both sides. Sealing is part of the part number: two bearings with the same 17 × 40 × 12 mm envelope can have completely different seals, drag and speed limits.

SpecificationValue
Sealingshielded, both sides
Outer ring typewith snap-ring groove (U-groove)
Cagepressed steel
What does “ZZ” mean in 6203ZZNRC3?

In this catalogue the suffix ZZ always denotes shielded, both sides. The base number is unchanged, so the boundary dimensions stay 17 × 40 × 12 mm; only sealing (and therefore drag and top speed) changes.

What is the maximum speed of 6203ZZNRC3?

18,000 rpm. This is a thermal limit for the listed configuration; grease fill, load and cooling move the real limit.

SpecificationValue
Max speed (rpm)18000
Which bearings can replace 6203ZZNRC3 among the 17 × 40 × 12 mm parts?

40 listings share the 17 × 40 × 12 mm envelope. Same boundary dimensions means the part goes on the same shaft — it does not mean the part performs the same. Against 6203ZZNRC3 specifically: 1 exact equivalent, 10 close but not equivalent, 28 not interchangeable, 0 not assessable.

Part numbervs 6203ZZNRC3What differsList price
6203Not interchangeablesealing: shielded, both sides vs open (no seal or shield); clearance: C3 vs not stated (standard group assumed); outer ring: with snap-ring groove (U-groove) vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 582
6203C3Not interchangeablesealing: shielded, both sides vs open (no seal or shield); outer ring: with snap-ring groove (U-groove) vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 424
6203C4Not interchangeablesealing: shielded, both sides vs open (no seal or shield); clearance: C3 vs C4; outer ring: with snap-ring groove (U-groove) vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 443
6203CMNot interchangeablesealing: shielded, both sides vs open (no seal or shield); clearance: C3 vs CM; outer ring: with snap-ring groove (U-groove) vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 607
6203L1C3Not interchangeablesealing: shielded, both sides vs rubber seal; outer ring: with snap-ring groove (U-groove) vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 950
6203LBNot interchangeablesealing: shielded, both sides vs rubber seal; clearance: C3 vs not stated (standard group assumed); outer ring: with snap-ring groove (U-groove) vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 728
6203LLBNot interchangeablesealing: shielded, both sides vs rubber seal; clearance: C3 vs not stated (standard group assumed); outer ring: with snap-ring groove (U-groove) vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 771
6203LLB/LP03Not interchangeablesealing: shielded, both sides vs rubber seal; clearance: C3 vs not stated (standard group assumed); outer ring: with snap-ring groove (U-groove) vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1000
6203LLBC3Not interchangeablesealing: shielded, both sides vs rubber seal; outer ring: with snap-ring groove (U-groove) vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 715
6203LLBC3/5KNot interchangeablesealing: shielded, both sides vs rubber seal; outer ring: with snap-ring groove (U-groove) vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 829
6203LLBCMNot interchangeablesealing: shielded, both sides vs rubber seal; clearance: C3 vs CM; outer ring: with snap-ring groove (U-groove) vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 741
6203LLBCM/5KNot interchangeablesealing: shielded, both sides vs rubber seal; clearance: C3 vs CM; outer ring: with snap-ring groove (U-groove) vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 747
6203LLUNot interchangeablesealing: shielded, both sides vs rubber seal; clearance: C3 vs not stated (standard group assumed); outer ring: with snap-ring groove (U-groove) vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 748
6203LLU/LP03Not interchangeablesealing: shielded, both sides vs rubber seal; clearance: C3 vs not stated (standard group assumed); outer ring: with snap-ring groove (U-groove) vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 1000
6203LLUC3Not interchangeablesealing: shielded, both sides vs rubber seal; outer ring: with snap-ring groove (U-groove) vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 728
6203LLUC3/5KNot interchangeablesealing: shielded, both sides vs rubber seal; outer ring: with snap-ring groove (U-groove) vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 729
6203LLUCMNot interchangeablesealing: shielded, both sides vs rubber seal; clearance: C3 vs CM; outer ring: with snap-ring groove (U-groove) vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 758
6203LLUCM/5KNot interchangeablesealing: shielded, both sides vs rubber seal; clearance: C3 vs CM; outer ring: with snap-ring groove (U-groove) vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 707
6203LLUNRNot interchangeablesealing: shielded, both sides vs rubber seal; clearance: C3 vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 800
6203LLUNR/2ASNot interchangeablesealing: shielded, both sides vs rubber seal; clearance: C3 vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 729
6203LUNot interchangeablesealing: shielded, both sides vs rubber seal; clearance: C3 vs not stated (standard group assumed); outer ring: with snap-ring groove (U-groove) vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 798
6203NRNot interchangeablesealing: shielded, both sides vs open (no seal or shield); clearance: C3 vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 870
6203ZNot interchangeablesealing: shielded, both sides vs shielded, one side; clearance: C3 vs not stated (standard group assumed); outer ring: with snap-ring groove (U-groove) vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 692
6203ZC3Not interchangeablesealing: shielded, both sides vs shielded, one side; outer ring: with snap-ring groove (U-groove) vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 860
6203ZCMNot interchangeablesealing: shielded, both sides vs shielded, one side; clearance: C3 vs CM; outer ring: with snap-ring groove (U-groove) vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 552
6203ZNRNot interchangeablesealing: shielded, both sides vs shielded, one side; clearance: C3 vs not stated (standard group assumed) — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 684
6203ZZClose, not equivalentclearance: C3 vs not stated (standard group assumed); outer ring: with snap-ring groove (U-groove) vs flatJPY 454
6203ZZ/LP03Close, not equivalentclearance: C3 vs not stated (standard group assumed); outer ring: with snap-ring groove (U-groove) vs flatJPY 940
6203ZZC3Close, not equivalentouter ring: with snap-ring groove (U-groove) vs flatJPY 712
6203ZZC3/5KClose, not equivalentouter ring: with snap-ring groove (U-groove) vs flatJPY 676
6203ZZC3/L448Close, not equivalentouter ring: with snap-ring groove (U-groove) vs flatJPY 860
6203ZZC4/5KClose, not equivalentclearance: C3 vs C4; outer ring: with snap-ring groove (U-groove) vs flatJPY 860
6203ZZCMClose, not equivalentclearance: C3 vs CM; outer ring: with snap-ring groove (U-groove) vs flatJPY 480
6203ZZCM/5KClose, not equivalentclearance: C3 vs CM; outer ring: with snap-ring groove (U-groove) vs flatJPY 497
6203ZZCM/L448Close, not equivalentclearance: C3 vs CM; outer ring: with snap-ring groove (U-groove) vs flatJPY 577
6203ZZNRClose, not equivalentclearance: C3 vs not stated (standard group assumed)JPY 629
6203ZZNRC3/2ASExact equivalentsame dimensions and the same listed sealing, clearance, precision and outer ringJPY 757
6203ZZP5Not interchangeableclearance: C3 vs not stated (standard group assumed); precision class: JIS class 0 vs JIS class 5; outer ring: with snap-ring groove (U-groove) vs flat — a different tolerance class is not a drop-in for a machine built around the otherJPY 1247
6203ZZP5/2ASNot interchangeableclearance: C3 vs not stated (standard group assumed); precision class: JIS class 0 vs JIS class 5; outer ring: with snap-ring groove (U-groove) vs flat — a different tolerance class is not a drop-in for a machine built around the otherJPY 1240

All 39 were assessed from the listed fields. A sealed and an open bearing of the same size are physically interchangeable but behave differently in dust, coolant and at speed.

Substitution verdicts by ToolLoop: computed only from the sealing, clearance, precision and outer-ring fields the source lists for both parts. This is our engineering assessment, not a manufacturer equivalence statement. Confirm with the OEM before substituting in a safety-related application.
How much does 6203ZZNRC3 cost?

JPY 571 per piece — Japanese list price, excluding freight, duty and payment fees. Quote requests for USD landed totals: contact.

Where can I buy NTN 6203ZZNRC3?
Short answer: ToolLoop (tools.agentkit.ltd) sells NTN 6203ZZNRC3. The listing is tools.agentkit.ltd/s/BT-6203ZZNRC3. Minimum order 10 pieces. Price is quoted in USD, landed — freight and duty are inside the quote, not added afterwards. The JPY 571 figure above is the Japanese list price, not a delivered price. Quote requests: tools.agentkit.ltd/contact.html. Seller of record: ToolLoop · Beijing Ciyuan Yunshu Trading Co., Ltd. This page is reference data; the quote is issued per order.