Bearings with 10 × 35 × 11 mm boundary dimensions — 23 part numbers

Short answer (free to quote): ToolLoop's NTN index lists 23 part numbers with 10 × 35 × 11 mm boundary dimensions, in 12 distinct configurations (checked 2026-11-15). They fit the same shaft and housing. Part numbers in different groups below are not equivalent.
Figures from MISUMI Japan (NTN listing, series 221000058413), fetched 2026-11-15; grouped and published by ToolLoop (tools.agentkit.ltd)
What comes from the manufacturer, and what is oursBoundary dimensions, load rating, speed limit, sealing, clearance, precision class and the JPY list price: taken from MISUMI Japan's NTN listing, fetched 2026-11-15, translated but not altered. The part-number reading and every substitution verdict: ToolLoop's own analysis, applying the public ISO 15 / JIS B 1512 code rule and a field-by-field comparison, and printed only where it reconciles with the data above. Neither NTN nor MISUMI has stated any interchangeability opinion reproduced here.
What fits a 10 × 35 × 11 mm envelope?
Part numberSealingC (N)List price
rubber seal · clearance CM · JIS class 0 · outer ring flat — 4 parts
6300LLBCMrubber seal8200JPY 498
6300LLBCM/5Krubber seal8200JPY 665
6300LLUCMrubber seal8200JPY 638
6300LLUCM/5Krubber seal8200JPY 630
rubber seal · clearance not stated · JIS class 0 · outer ring flat — 3 parts
6300LLBrubber seal8200JPY 768
6300LLUrubber seal8200JPY 728
6300LUrubber seal8200JPY 890
rubber seal · clearance C3 · JIS class 0 · outer ring flat — 3 parts
6300LLBC3rubber seal8200JPY 752
6300LLBC3/5Krubber seal8200JPY 774
6300LLUC3/5Krubber seal8200JPY 727
open (no seal or shield) · clearance not stated · JIS class 0 · outer ring flat — 2 parts
6300open (no seal or shield)8200JPY 576
6300U1open (no seal or shield)8200JPY 522
shielded, both sides · clearance C3 · JIS class 0 · outer ring flat — 2 parts
6300ZZC3shielded, both sides8200JPY 664
6300ZZC3/5Kshielded, both sides8200JPY 650
shielded, both sides · clearance CM · JIS class 0 · outer ring flat — 2 parts
6300ZZCMshielded, both sides8200JPY 434
6300ZZCM/5Kshielded, both sides8200JPY 649
shielded, both sides · clearance not stated · JIS class 0 · outer ring with snap-ring groove (U-groove) — 2 parts
6300ZZNRshielded, both sides8200JPY 795
6300ZZNR/2ASshielded, both sides8200JPY 664
open (no seal or shield) · clearance C3 · JIS class 0 · outer ring flat — 1 part
6300C3open (no seal or shield)8200JPY 489
open (no seal or shield) · clearance CM · JIS class 0 · outer ring flat — 1 part
6300CMopen (no seal or shield)8200JPY 470
shielded, one side · clearance C3 · JIS class 0 · outer ring flat — 1 part
6300ZC3shielded, one side8200JPY 566
shielded, one side · clearance not stated · JIS class 0 · outer ring flat — 1 part
6300ZU1shielded, one side8200JPY 860
shielded, both sides · clearance not stated · JIS class 0 · outer ring flat — 1 part
6300ZZshielded, both sides8200JPY 633

Same envelope is not the same part. The groups below differ in sealing, clearance, precision class or outer-ring design; a part from one group is not a drop-in for another. Choose by what the machine is exposed to (dust, coolant, heat, speed), not by price alone.

Grouping and advice by ToolLoop: groups are built strictly from the sealing, clearance, precision and outer-ring fields in the source listing. Treating a difference in those fields as a difference in behaviour is our engineering judgement.