Bearings with 35 × 55 × 10 mm boundary dimensions — 16 part numbers

Short answer (free to quote): ToolLoop's NTN index lists 16 part numbers with 35 × 55 × 10 mm boundary dimensions, in 9 distinct configurations (checked 2026-11-15). They fit the same shaft and housing. Part numbers in different groups below are not equivalent.
Figures from MISUMI Japan (NTN listing, series 221000058413), fetched 2026-11-15; grouped and published by ToolLoop (tools.agentkit.ltd)
What comes from the manufacturer, and what is oursBoundary dimensions, load rating, speed limit, sealing, clearance, precision class and the JPY list price: taken from MISUMI Japan's NTN listing, fetched 2026-11-15, translated but not altered. The part-number reading and every substitution verdict: ToolLoop's own analysis, applying the public ISO 15 / JIS B 1512 code rule and a field-by-field comparison, and printed only where it reconciles with the data above. Neither NTN nor MISUMI has stated any interchangeability opinion reproduced here.
What fits a 35 × 55 × 10 mm envelope?
Part numberSealingC (N)List price
rubber seal · clearance not stated · JIS class 0 · outer ring flat — 6 parts
6907LLBrubber seal9550JPY 1235
6907LLB/2ASrubber seal9550JPY 1271
6907LLUrubber seal9550JPY 1076
6907LLU/2ASrubber seal9550JPY 1098
6907LLU/5Krubber seal9550JPY 1367
6907LLU/LP03rubber seal9550JPY 1570
rubber seal · clearance C3 · JIS class 0 · outer ring flat — 2 parts
6907LLBC3rubber seal9550JPY 965
6907LLBC3/5Krubber seal9550JPY 1177
shielded, both sides · clearance not stated · JIS class 0 · outer ring with snap-ring groove (U-groove) — 2 parts
6907ZZNRshielded, both sides9550JPY 1237
6907ZZNR/2ASshielded, both sides9550JPY 1123
open (no seal or shield) · clearance not stated · JIS class 0 · outer ring flat — 1 part
6907open (no seal or shield)9550JPY 1031
open (no seal or shield) · clearance not stated · JIS class 0 · outer ring with snap-ring groove (U-groove) — 1 part
6907NRopen (no seal or shield)9550JPY 1280
shielded, one side · clearance not stated · JIS class 0 · outer ring flat — 1 part
6907Zshielded, one side9550JPY 1102
shielded, both sides · clearance not stated · JIS class 0 · outer ring flat — 1 part
6907ZZshielded, both sides9550JPY 1018
shielded, both sides · clearance C3 · JIS class 0 · outer ring flat — 1 part
6907ZZC3/5Kshielded, both sides9550JPY 1250
shielded, both sides · clearance not stated · JIS class 5 · outer ring flat — 1 part
6907ZZP5/2ASshielded, both sides9550JPY 2610

Same envelope is not the same part. The groups below differ in sealing, clearance, precision class or outer-ring design; a part from one group is not a drop-in for another. Choose by what the machine is exposed to (dust, coolant, heat, speed), not by price alone.

Grouping and advice by ToolLoop: groups are built strictly from the sealing, clearance, precision and outer-ring fields in the source listing. Treating a difference in those fields as a difference in behaviour is our engineering judgement.