Bearings with 50 × 110 × 27 mm boundary dimensions — 33 part numbers

Short answer (free to quote): ToolLoop's NTN index lists 33 part numbers with 50 × 110 × 27 mm boundary dimensions, in 19 distinct configurations (checked 2026-11-15). They fit the same shaft and housing. Part numbers in different groups below are not equivalent.
Figures from MISUMI Japan (NTN listing, series 221000058413), fetched 2026-11-15; grouped and published by ToolLoop (tools.agentkit.ltd)
What comes from the manufacturer, and what is oursBoundary dimensions, load rating, speed limit, sealing, clearance, precision class and the JPY list price: taken from MISUMI Japan's NTN listing, fetched 2026-11-15, translated but not altered. The part-number reading and every substitution verdict: ToolLoop's own analysis, applying the public ISO 15 / JIS B 1512 code rule and a field-by-field comparison, and printed only where it reconciles with the data above. Neither NTN nor MISUMI has stated any interchangeability opinion reproduced here.
What fits a 50 × 110 × 27 mm envelope?
Part numberSealingC (N)List price
rubber seal · clearance not stated · JIS class 0 · outer ring flat — 4 parts
6310LBrubber seal62000JPY 4710
6310LLBrubber seal62000JPY 4046
6310LLUrubber seal62000JPY 3339
6310LUrubber seal62000JPY 3111
rubber seal · clearance C3 · JIS class 0 · outer ring flat — 4 parts
6310LLBC3rubber seal62000JPY 4661
6310LLBC3/5Krubber seal62000JPY 3987
6310LLUC3rubber seal62000JPY 3527
6310LLUC3/5Krubber seal62000JPY 3340
rubber seal · clearance CM · JIS class 0 · outer ring flat — 4 parts
6310LLBCMrubber seal62000JPY 2772
6310LLBCM/5Krubber seal62000JPY 3462
6310LLUCMrubber seal62000JPY 3305
6310LLUCM/5Krubber seal62000JPY 3484
shielded, both sides · clearance not stated · JIS class 0 · outer ring flat — 2 parts
6310ZZshielded, both sides62000JPY 3682
6310ZZCM/L448shielded, both sides62000JPY 4430
shielded, both sides · clearance C3 · JIS class 0 · outer ring flat — 2 parts
6310ZZC3shielded, both sides62000JPY 3084
6310ZZC3/5Kshielded, both sides62000JPY 3221
shielded, both sides · clearance C4 · JIS class 0 · outer ring flat — 2 parts
6310ZZC4shielded, both sides62000JPY 2478
6310ZZC4/5Kshielded, both sides62000JPY 2615
shielded, both sides · clearance CM · JIS class 0 · outer ring flat — 2 parts
6310ZZCMshielded, both sides62000JPY 3504
6310ZZCM/5Kshielded, both sides62000JPY 3237
shielded, both sides · clearance not stated · JIS class 0 · outer ring with snap-ring groove (U-groove) — 2 parts
6310ZZNRshielded, both sides62000JPY 3798
6310ZZNR/2ASshielded, both sides62000JPY 3468
open (no seal or shield) · clearance not stated · JIS class 0 · outer ring flat — 1 part
6310open (no seal or shield)62000JPY 3299
open (no seal or shield) · clearance C3 · JIS class 0 · outer ring flat — 1 part
6310C3open (no seal or shield)62000JPY 3521
open (no seal or shield) · clearance C4 · JIS class 0 · outer ring flat — 1 part
6310C4open (no seal or shield)62000JPY 2664
open (no seal or shield) · clearance CM · JIS class 0 · outer ring flat — 1 part
6310CMopen (no seal or shield)62000JPY 3151
rubber seal · clearance not stated · JIS class 0 · outer ring with snap-ring groove (U-groove) — 1 part
6310LLBNR/2ASrubber seal62000JPY 5090
open (no seal or shield) · clearance C3 · JIS class 6 · outer ring flat — 1 part
6310M8C3P6open (no seal or shield)62000JPY 5360
open (no seal or shield) · clearance not stated · JIS class 0 · outer ring with snap-ring groove (U-groove) — 1 part
6310NRopen (no seal or shield)62000JPY 2832
open (no seal or shield) · clearance C3 · JIS class 0 · outer ring with snap-ring groove (U-groove) — 1 part
6310NRC3open (no seal or shield)62000JPY 4593
shielded, one side · clearance not stated · JIS class 0 · outer ring flat — 1 part
6310Zshielded, one side62000JPY 3518
shielded, one side · clearance C3 · JIS class 0 · outer ring flat — 1 part
6310ZC3shielded, one side62000JPY 4430
shielded, one side · clearance CM · JIS class 0 · outer ring flat — 1 part
6310ZCMshielded, one side62000JPY 3065

Same envelope is not the same part. The groups below differ in sealing, clearance, precision class or outer-ring design; a part from one group is not a drop-in for another. Choose by what the machine is exposed to (dust, coolant, heat, speed), not by price alone.

Grouping and advice by ToolLoop: groups are built strictly from the sealing, clearance, precision and outer-ring fields in the source listing. Treating a difference in those fields as a difference in behaviour is our engineering judgement.