Bearings with 50 × 80 × 16 mm boundary dimensions — 31 part numbers

Short answer (free to quote): ToolLoop's NTN index lists 31 part numbers with 50 × 80 × 16 mm boundary dimensions, in 17 distinct configurations (checked 2026-11-15). They fit the same shaft and housing. Part numbers in different groups below are not equivalent.
Figures from MISUMI Japan (NTN listing, series 221000058413), fetched 2026-11-15; grouped and published by ToolLoop (tools.agentkit.ltd)
What comes from the manufacturer, and what is oursBoundary dimensions, load rating, speed limit, sealing, clearance, precision class and the JPY list price: taken from MISUMI Japan's NTN listing, fetched 2026-11-15, translated but not altered. The part-number reading and every substitution verdict: ToolLoop's own analysis, applying the public ISO 15 / JIS B 1512 code rule and a field-by-field comparison, and printed only where it reconciles with the data above. Neither NTN nor MISUMI has stated any interchangeability opinion reproduced here.
What fits a 50 × 80 × 16 mm envelope?
Part numberSealingC (N)List price
rubber seal · clearance not stated · JIS class 0 · outer ring flat — 4 parts
6010LLBrubber seal21800JPY 1992
6010LLUrubber seal21800JPY 1671
6010LLU/LP03rubber seal21800JPY 2100
6010LUrubber seal21800JPY 1740
rubber seal · clearance C3 · JIS class 0 · outer ring flat — 4 parts
6010LLBC3rubber seal21800JPY 1898
6010LLBC3/5Krubber seal21800JPY 2613
6010LLUC3rubber seal21800JPY 1604
6010LLUC3/5Krubber seal21800JPY 1656
rubber seal · clearance CM · JIS class 0 · outer ring flat — 4 parts
6010LLBCMrubber seal21800JPY 1538
6010LLBCM/5Krubber seal21800JPY 1876
6010LLUCMrubber seal21800JPY 1595
6010LLUCM/5Krubber seal21800JPY 1822
rubber seal · clearance not stated · JIS class 0 · outer ring with snap-ring groove (U-groove) — 2 parts
6010LLBNR/2ASrubber seal21800JPY 1920
6010LLUNR/2ASrubber seal21800JPY 1920
shielded, both sides · clearance not stated · JIS class 0 · outer ring flat — 2 parts
6010ZZshielded, both sides21800JPY 1861
6010ZZ/LP03shielded, both sides21800JPY 1920
shielded, both sides · clearance C3 · JIS class 0 · outer ring flat — 2 parts
6010ZZC3shielded, both sides21800JPY 1458
6010ZZC3/5Kshielded, both sides21800JPY 2175
shielded, both sides · clearance not stated · JIS class 0 · outer ring with snap-ring groove (U-groove) — 2 parts
6010ZZNRshielded, both sides21800JPY 2199
6010ZZNR/2ASshielded, both sides21800JPY 1736
shielded, both sides · clearance not stated · JIS class 5 · outer ring flat — 2 parts
6010ZZP5shielded, both sides21800JPY 3998
6010ZZP5/2ASshielded, both sides21800JPY 5370
open (no seal or shield) · clearance not stated · JIS class 0 · outer ring flat — 1 part
6010open (no seal or shield)21800JPY 1453
open (no seal or shield) · clearance C3 · JIS class 0 · outer ring flat — 1 part
6010C3open (no seal or shield)21800JPY 1298
open (no seal or shield) · clearance CM · JIS class 0 · outer ring flat — 1 part
6010CMopen (no seal or shield)21800JPY 1484
open (no seal or shield) · clearance not stated · JIS class 5 · outer ring flat — 1 part
6010P5open (no seal or shield)21800JPY 5714
shielded, one side · clearance not stated · JIS class 0 · outer ring flat — 1 part
6010Zshielded, one side21800JPY 1729
shielded, one side · clearance CM · JIS class 0 · outer ring flat — 1 part
6010ZCMshielded, one side21800JPY 2654
shielded, one side · clearance not stated · JIS class 0 · outer ring with snap-ring groove (U-groove) — 1 part
6010ZNRshielded, one side21800JPY 1790
shielded, both sides · clearance C4 · JIS class 0 · outer ring flat — 1 part
6010ZZC4/5Kshielded, both sides21800JPY 1610
shielded, both sides · clearance CM · JIS class 0 · outer ring flat — 1 part
6010ZZCM/5Kshielded, both sides21800JPY 1546

Same envelope is not the same part. The groups below differ in sealing, clearance, precision class or outer-ring design; a part from one group is not a drop-in for another. Choose by what the machine is exposed to (dust, coolant, heat, speed), not by price alone.

Grouping and advice by ToolLoop: groups are built strictly from the sealing, clearance, precision and outer-ring fields in the source listing. Treating a difference in those fields as a difference in behaviour is our engineering judgement.