140 × 190 × 24 mm bearing: NTN and NSK part numbers and JPY prices

Short answer (free to quote): For a 140 mm bore × 190 mm outside diameter × 24 mm width deep groove ball bearing, ToolLoop's index holds 5 listings across NTN and NSK. In the shielded variant the cheapest listing is NSK at ¥18,058 against NTN at ¥19,306 — a 6.5% difference (MISUMI Japan list prices, fetched 2026-11-15).
Prices and dimensions from MISUMI Japan, fetched 2026-11-15; comparison by ToolLoop
What is the distributor's, what is oursBoundary dimensions, sealing, load ratings, the static rating where the listing gives one, and the JPY list price: taken from the MISUMI Japan listing for each brand, translated but not altered. The cheapest-in-variant pick, the percentage gap and every remark about which listing is worth looking at: ToolLoop's calculation. Neither NTN nor NSK has stated an interchangeability opinion that is reproduced here.

Every listing in this size

BrandPart numberSealingC (N)C0 (N)List price (JPY)Source
NSK6928ZZshielded, both sides665007200018058source
NTN6928open (no seal or shield)66500—18047source
NTN6928LLU/2ASrubber seal66500—18735source
NTN6928ZZ/2ASshielded, both sides66500—19306source
NTN6928ZZshielded, both sides66500—19640source
Written by ToolLoop: same boundary dimensions means the two brands drop into the same seat. It does not mean the same load rating, the same speed ceiling or the same internal clearance — compare the C and C0 columns above before treating them as equals.

The seat this bearing needs

A 140 mm bore falls in the ISO 286 band 120–180 mm, where IT7 is 40 µm wide. If the shaft seat is machined to h6, the shaft measures 139.975 to 140.000 mm; a H7/h6 pair at this nominal gives 0 to +65 µm.

Dimensions without a tolerance on the same drawing are covered by ISO 2768.