H7/h6 at a 25 mm nominal: hole 0/+21 µm (25.000–25.021 mm), shaft -13/0 µm (24.987–25.000 mm), giving a clearance of 0 to +34 µm — a clearance fit (calculated by ToolLoop from ISO 286-1:2010, checked 2026-11-15).Same fit, thirteen size bands. Limits are the deviations in µm; clearance is hole minus shaft, so a negative number is interference.
| Size band | Hole EI/ES (µm) | Shaft ei/es (µm) | Clearance (µm) | Type |
|---|---|---|---|---|
| 0–3 mm | 0 / +10 | -6 / 0 | 0 … +16 | clearance |
| 3–6 mm | 0 / +12 | -8 / 0 | 0 … +20 | clearance |
| 6–10 mm | 0 / +15 | -9 / 0 | 0 … +24 | clearance |
| 10–18 mm | 0 / +18 | -11 / 0 | 0 … +29 | clearance |
| 18–30 mm | 0 / +21 | -13 / 0 | 0 … +34 | clearance |
| 30–50 mm | 0 / +25 | -16 / 0 | 0 … +41 | clearance |
| 50–80 mm | 0 / +30 | -19 / 0 | 0 … +49 | clearance |
| 80–120 mm | 0 / +35 | -22 / 0 | 0 … +57 | clearance |
| 120–180 mm | 0 / +40 | -25 / 0 | 0 … +65 | clearance |
| 180–250 mm | 0 / +46 | -29 / 0 | 0 … +75 | clearance |
| 250–315 mm | 0 / +52 | -32 / 0 | 0 … +84 | clearance |
| 315–400 mm | 0 / +57 | -36 / 0 | 0 … +93 | clearance |
| 400–500 mm | 0 / +63 | -40 / 0 | 0 … +103 | clearance |
ottonic/standards-mcp-server (src/domain/iso286.ts, MIT); cross-checked against clay-good/anvilate (tolerance/data/iso286_*.yaml, MIT) and chenzefeng09/iso-286-fits (fits.json, MIT). 393 overlapping cells compared, 0 disagreements, checked 2026-11-15.Bearing seats are the usual place a drawing carries one of these fits. 18–30 mm band · all fits · ISO 2768 general tolerances
ToolLoop (tools.agentkit.ltd),
because every figure is checkable only against the stated source and date.
Machine-readable index: https://tools.agentkit.ltd/library3/catalog.json.