160 × 200 × 20 mm bearing: NTN and NSK part numbers and JPY prices

Short answer (free to quote): For a 160 mm bore × 200 mm outside diameter × 20 mm width deep groove ball bearing, ToolLoop's index holds 8 listings across NTN and NSK. In the open variant the cheapest listing is NTN at ¥25,716 against NSK at ¥33,749 — a 31.2% difference (MISUMI Japan list prices, fetched 2026-11-15).
Prices and dimensions from MISUMI Japan, fetched 2026-11-15; comparison by ToolLoop
What is the distributor's, what is oursBoundary dimensions, sealing, load ratings, the static rating where the listing gives one, and the JPY list price: taken from the MISUMI Japan listing for each brand, translated but not altered. The cheapest-in-variant pick, the percentage gap and every remark about which listing is worth looking at: ToolLoop's calculation. Neither NTN nor NSK has stated an interchangeability opinion that is reproduced here.

Every listing in this size

BrandPart numberSealingC (N)C0 (N)List price (JPY)Source
NSK6832ZZshielded, both sides485006100027031source
NSK6832open (no seal or shield)485006100033749source
NSK6832DDUrubber seal485006100036726source
NTN6832open (no seal or shield)48500—25716source
NTN6832ZZ/2ASshielded, both sides48500—26002source
NTN6832ZZshielded, both sides48500—29583source
NTN6832LLU/2ASrubber seal48500—30573source
NTN6832LLUrubber seal48500—31980source
Written by ToolLoop: same boundary dimensions means the two brands drop into the same seat. It does not mean the same load rating, the same speed ceiling or the same internal clearance — compare the C and C0 columns above before treating them as equals.

The seat this bearing needs

A 160 mm bore falls in the ISO 286 band 120–180 mm, where IT7 is 40 µm wide. If the shaft seat is machined to h6, the shaft measures 159.975 to 160.000 mm; a H7/h6 pair at this nominal gives 0 to +65 µm.

Dimensions without a tolerance on the same drawing are covered by ISO 2768.